Parts catalogue

3500/44M Aeroderivative GT Vibration Monitor

The Bently Nevada 140734-03 is a 3500/44M four-channel aeroderivative gas turbine vibration monitor. Accepts signals from four velocity transducers and evaluates machine vibration against preset alarm thresholds.

140734-04

Tachometer ModuleBently Nevada

3500/45 Tachometer Module

The Bently Nevada 140734-04 is a 3500/45 tachometer module for machinery health monitoring, compatible with various sensor types and operating at standard industry voltages.

140734-05

3500/64M Dynamic Pressure Monitor

The Bently Nevada 140734-05 is a 3500/64M dynamic pressure monitor for early detection of issues in industrial machinery. Four independent channels, bandpass dynamic pressure, configurable alarm setpoints; integrates with the 3500 series.

140734-07

Vibration MonitorBently Nevada

3500/77M Reciprocating Cylinder Pressure Monitor

The Bently Nevada 140734-07 is a 3500/77M four-channel reciprocating cylinder pressure monitor for reciprocating compressors. Accepts Bently Nevada-approved pressure transducers; frequency response 0 to 5.5 kHz; accuracy within +/-0.5% of full scale.

Contact for wholesale

140734-08

Position Monitor ModuleBently Nevada

3500/72M Position Monitor Module

The Bently Nevada 140734-08 is a 3500 series Position Monitor Module for monitoring dynamic and static position from proximity transducer input, comparing the signal against user-programmable alarm setpoints. Power consumption 7.7 watts; weight 0.91 kg.

143493-00-080-040-50-00

3300 XL Proximity Probe

Bently Nevada 143493 series proximity probe configured for non-contact vibration and position measurement.

1442-PR-0830M0505N

Eddy Current Proximity Probe

Bently Nevada 1442 series eddy-current proximity probe for non-contact vibration and displacement measurement.

1442-PS-0805M0010N

Eddy Current Proximity Probe

Bently Nevada 1442 series eddy-current proximity probe for non-contact vibration and displacement measurement.

146358-01

3500 Series Monitoring Module

The Bently Nevada 146358-01 is a monitoring and protection module for the 3500 series, used for vibration and machinery condition diagnostics.

147025-01

Proximity TransducerBently Nevada

Proximitor Sensor

Bently Nevada 147025-01 Proximitor sensor for 3300XL eddy-current proximity transducer systems, used for shaft vibration and position monitoring.

147M7136-02-01

AccelerometerBently Nevada

Wireless Triaxial Accelerometer

The Bently Nevada 147M7136-02-01 is a wireless triaxial accelerometer with integrated temperature sensor for continuous remote vibration and temperature monitoring of rotating machinery. ISA100 wireless protocol; integrates with System 1. IP67, hazardous-area certified.

149369-01

Keyphasor ModuleBently Nevada

3500/25 Enhanced Keyphasor Module

The Bently Nevada 3500/25 Enhanced Keyphasor Module is a half-height, two-channel module that detects the Keyphasor mark on a shaft via magnetic pickups or proximity probes and transmits digital Keyphasor signals to monitor modules in a 3500 rack.

149776-02

Trend Indicating/Triggering Module (TIM)

The Bently Nevada 149776-02 is a Trend Indicating/Triggering Module (TIM) for machine health monitoring, interfacing with seismic and constant-current transducers for condition monitoring and predictive maintenance. Bandwidth up to 24 kHz.

149832-01

Trend Indicating/Triggering Module (TIM)

The Bently Nevada 149832-01 is a Trend Indicating/Triggering Module (TIM) for machine health monitoring, interfacing with seismic and constant-current transducers for condition monitoring and predictive maintenance. Bandwidth up to 24 kHz; IP68.

161141-01

1701/25 FieldMonitor Seismic Input Monitor

The Bently Nevada 1701/25 FieldMonitor Seismic Input Monitor is a 2-channel module accepting acceleration or velocity transducer signals, with user-programmable alarm setpoints and built-in self-test diagnostics for industrial machinery health monitoring.

164952-01-01

AccelerometerBently Nevada

Accelerometer Mounting Kit

The Bently Nevada 164952-01-01 Accelerometer Mounting Kit provides a protective enclosure for accelerometers used in turbine, compressor and rotating-machinery monitoring, shielding sensors from dust, moisture and mechanical stress. Includes housing, cover, O-ring, gasket, cable grip and screws; meets API 670 when installed.

165844-14

3300 XL Proximity Probe

The Bently Nevada 165844-14 is a 3300 XL proximity probe for non-contact measurement of vibration and displacement, with extended linear range for critical machinery monitoring.

16699-01-02-02

Velocity Seismoprobe

The Bently Nevada 16699-01-02-02 is a velocity seismoprobe for industrial vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

16699-03

Velocity Seismoprobe

The Bently Nevada 16699-03 velocity seismoprobe measures vibration velocity for machinery health monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

16699-03-02-02

Velocity Seismoprobe

The Bently Nevada 16699-03-02-02 is a velocity seismoprobe for vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec; minimum operating frequency 600 RPM; angular range 90 deg +/-10 deg.

16699-10-02-01

Velocity Seismoprobe

The Bently Nevada 16699-10-02-01 is a velocity seismoprobe for industrial vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

16699-10-02-02

Velocity Seismoprobe

The Bently Nevada 16699-10-02-02 is a velocity seismoprobe for vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec; minimum operating frequency 600 RPM; angular range 90 deg +/-10 deg.

167707-01

1900 Series Vibration Monitor Module

The Bently Nevada 167707-01 is a four-channel vibration monitor module from the 1900 product line, designed for machinery protection. Made in USA, CE certified.

169253-01

Monitor Module

Bently Nevada 169253-01 is a module from the 3300 series used for monitoring and protecting critical rotating machinery, operating at 24 VDC with about 100 mA consumption over a -40°C to +70°C range.

1701/15

FieldMonitor Proximitor Input Monitor

Bently Nevada 1701/15 is a FieldMonitor Proximitor input monitor for radial vibration and thrust position measurement on rotating machinery.

1701/25

FieldMonitor Seismic Input Monitor

Bently Nevada 1701/25 is a FieldMonitor seismic input monitor for vibration measurement on industrial rotating machinery.

170133-050-00

FieldMonitor Proximitor Sensor Module

Bently Nevada 170133-050-00 is a Proximitor sensor module for the 1701 FieldMonitor, compatible with 3300 series 5 mm and 8 mm probes, with 5 m system length, 200 mV/mil scale factor and 24 VDC supply.

170133-090-00

FieldMonitor Proximitor Sensor Module

Bently Nevada 170133-090-00 is a non-contact Proximitor sensor module for the 1701 FieldMonitor, using a 3300 series 5 mm or 8 mm probe, 9 m system length, 200 mV/mil scale factor and 24 VDC supply.

170133-140-00

Dual Proximitor Sensor Module

Bently Nevada 170133-140-00 is a dual Proximitor module with two built-in sensors, compatible with 3300 series 5 mm or 8 mm probes, supporting 5, 9 and 14 m system lengths with 250-2250 µm calibration range.

170133-XXX-00

Dual Proximitor Sensor Module

Bently Nevada 1701 FieldMonitor dual Proximitor sensor module with two built-in sensors; compatible with any standard 3300-series 5 mm or 8 mm probe and 5/9/14 m system lengths. The XXX denotes the system-length variant.

172002-5

General Purpose Equipment Monitor

Bently Nevada 172002-5 is a 1900/65A general-purpose equipment monitor for continuous vibration and temperature monitoring of industrial machinery, with four configurable vibration channels and 4-20 mA analog outputs.

172004-5

General Purpose Equipment Monitor

Bently Nevada 172004-5 is a 1900/65A general-purpose equipment monitor for continuous vibration and temperature monitoring of industrial machinery, with four configurable vibration channels and 4-20 mA analog outputs.

172323-01

1900/65A General Purpose Equipment Monitor

Bently Nevada 172323-01 is a 1900/65A general-purpose equipment monitor with 4 transducer inputs, 4 temperature inputs, 6 relay outputs, four 4-20 mA outputs and Modbus communication over Ethernet and RS232/485.

175794-01

Machinery Dynamics Monitor

Bently Nevada 175794-01 is a 3701/40 and 3701/60 series machinery dynamics monitor for vibration and rod-position monitoring on reciprocating compressors, engines and turbines, API-618 compliant with DCS/SCADA integration.

176449-01

3500/40M Proximitor Monitor

Bently Nevada 176449-01 is a 3500/40M Proximitor monitor that interfaces with proximity transducers, converting signals to a voltage output proportional to distance for shaft vibration and displacement monitoring.

176449-02

3500/42M Proximitor/Seismic Monitor

Bently Nevada 176449-02 is a 3500/42M Proximitor/Seismic monitor that accepts signals from proximity and seismic transducers for machinery protection, with IP66 enclosure, ±0.5% accuracy and 24 VDC supply.

176449-02

3500/42M Proximitor Seismic Monitor

Bently Nevada 176449-02 3500/42M 4-channel Proximitor/Seismic monitor; conditions proximity and seismic transducer signals for radial vibration, thrust position, eccentricity and acceleration measurement with programmable alarms.

176449-03

3500/44M Aeroderivative GT Vibration Monitor

Bently Nevada 176449-03 is a 3500/44M four-channel vibration monitor with a 1 Hz to 10 kHz frequency range, built-in signal processing and trending, and alarm outputs for critical vibration levels.

176449-04

Position Monitor ModuleBently Nevada

3500/45 Position Monitor

Bently Nevada 176449-04 is a 3500/45 position monitor providing precise position monitoring for machinery protection applications.

176449-05

3500/64M Dynamic Pressure Monitor

Bently Nevada 176449-05 is a 3500/64M dynamic pressure monitor that accepts input from high-temperature pressure transducers and drives alarms; bandpass dynamic pressure per channel, 24 VDC, 12 W.

176449-08

Position Monitor ModuleBently Nevada

3500/72M Recip Rod Position Monitor

Bently Nevada 176449-08 is a 3500/72M reciprocating rod position monitor, IP67 rated, 24 VDC input with 0-10 V DC output, for harsh industrial machinery protection.

176449-09

3500/70M Recip Impulse/Velocity Monitor

Bently Nevada 176449-09 is a 3500/70M reciprocating impulse/velocity monitor accepting up to four seismic transducer inputs (10-100 mVrms), 3-30,000 Hz frequency range, with RS-232/485 and Ethernet communication.

176499-02

Thrust Position MonitorBently Nevada

Thrust Monitor Module

Bently Nevada 176499-02 is a thrust monitor module providing precise thrust measurement (0-200 kN, ±0.5% accuracy, 0.1 kN resolution) for machinery condition monitoring, rated -40°C to +85°C.

176499-03

Overspeed Detection and Vibration Monitor Module

Bently Nevada 176499-03 is a 3500 series monitoring module for overspeed detection and vibration analysis, with four vibration input channels, configurable alarm setpoints and buffered signal outputs.

177230-00-01-05

Seismic Transmitter

Bently Nevada 177230-00-01-05 is a seismic transmitter with 0-12.7 mm/s (0-0.5 in/s) measurement range, 10 Hz to 1 kHz frequency response, multiple hazardous-area approvals, 12-30 VDC supply.

177230-01-01

Seismic Transmitter

Bently Nevada 177230-01-01 is a seismic transmitter for industrial vibration monitoring.

177230-01-01-00

Seismic Transmitter

Bently Nevada 177230-01-01-00 is a seismic transmitter with 0-25.4 mm/s (0-1.0 in/s) measurement range, 10 Hz to 1 kHz frequency response, 316L stainless steel case and 3-pin MIL-C-5015 connector.

177230-01-01-05

Seismic Transmitter

Bently Nevada 177230-01-01-05 is a seismic transmitter with 4-20 mA output signal, IP65 protection rating, 12-30 VDC supply, rated -40°C to 85°C.