Parts catalogue

Seismic Transmitter

Bently Nevada 177230-01-02 is a seismic transmitter for industrial vibration monitoring.

177230-01-02-05

Seismic Transmitter

Bently Nevada 177230-01-02-05 is a loop-powered seismic transmitter with 4-20 mA output, IP65 rating, 0-25.4 mm/s range, 10 Hz to 1 kHz frequency response, for PLC/DCS/SCADA integration.

177230-02

Seismic Transmitter

Bently Nevada 177230-02 is a seismic transmitter with 0-50.8 mm/s (0-2.0 in/s) measurement range, 316L stainless steel case, 3-pin MIL-C-5015 connector, rated -40°C to +85°C.

177230-02-01-05

Seismic Transmitter

Bently Nevada

Seismic Transmitter

Bently Nevada 177230-02-01-05 is a seismic transmitter with 0-50.8 mm/s (0-2.0 in/s) measurement range, 10 Hz to 1 kHz frequency response, multiple hazardous-area approvals, 12-30 VDC supply.

Contact for wholesale

177230-02-02-05

Seismic Transmitter

Bently Nevada 177230-02-02-05 is a seismic transmitter for industrial vibration monitoring.

178850-00

Vibration Monitor ModuleBently Nevada

Equipment Monitor Module

Bently Nevada 178850-00 is an equipment monitor module for industrial machinery condition monitoring.

1800/15-12-90-02-00

Vibration TransmitterBently Nevada

Relative Vibration Transmitter

Bently Nevada 1800/15-12-90-02-00 is a relative vibration transmitter with 0.1-100 mm/s RMS measurement range, 0.1-10 kHz frequency range, 4-20 mA output, Modbus RTU/Ethernet-IP communication and 24 VDC supply.

18745-02

Proximity TransducerBently Nevada

7200 Series Proximitor Sensor

Bently Nevada 18745-02 is a 7200 series Proximitor sensor with 5 mm probe diameter, 9 m cable, 200 mV/mil scale factor, -18 to -24 VDC supply, 0 Hz to 10 kHz frequency response, compatible with 3300 and 9000 monitoring systems.

18745-03

Proximity TransducerBently Nevada

7200 Series 5 & 8 mm Proximitor Sensor

Bently Nevada 18745-03 is a 7200 series 5 & 8 mm Proximitor sensor for non-contact shaft position and vibration measurement on rotating machinery.

18745-04

Proximity TransducerBently Nevada

7200 Series Proximitor Sensor

Bently Nevada 18745-04 is a 7200 series Proximitor sensor with 5 mm probe diameter, 9 m cable, -18 to -24 VDC supply.

1900/27

Vibration Monitor

Bently Nevada 1900/27 is a two-channel machinery vibration monitor that processes signals from proximity/seismic transducers to provide continuous protection of rotating equipment. Configured option variants (e.g. 1900/27-01-00) ship from this base family code.

1900/27-01

1900/27 Vibration Monitor

Bently Nevada 1900/27-01 is a single-channel, locally mounted, general-purpose vibration monitor with a built-in 4-20 mA interface, 100 mV/g input sensitivity, ±0.5% accuracy, rated -40 to 85°C.

1900/27-02-00

1900/27 Vibration Monitor

Bently Nevada 1900/27-02-00 is a single-channel general-purpose vibration monitor for machinery protection.

1900/27-03

1900/27 Vibration Monitor

Bently Nevada 1900/27-03 is a single-channel vibration monitor with built-in 4-20 mA interface, 100 mV/g input sensitivity, compatible with 200150 and 190520 accelerometers, for machinery protection and condition monitoring.

1900/55

Aeroderivative Vibration Monitor

Bently Nevada 1900/55 is a member of the 1900 Series compact machinery vibration monitor family used for continuous protection of rotating equipment. Configured option-code variants ship from this base family code.

1900/55-02-01-01-00

Fan Monitor System

Bently Nevada 1900/55-02-01-01-00 is a fan monitor system with 0-100 mm/s RMS measurement range, 2-1000 Hz frequency range, 4-20 mA output, 10 mV/g sensitivity, rated -40°C to +121°C.

1900/65

General Purpose Equipment Monitor

Bently Nevada 1900/65 is a 1900 Series general-purpose equipment monitor for continuous vibration monitoring and protection of rotating machinery. Configured variants ship from this base family code.

1900/65A

General Purpose Equipment Monitor

Bently Nevada 1900/65A is a general-purpose equipment monitor in the 1900 Series, providing continuous vibration monitoring and machinery protection. Configured option-code variants ship from this base family code.

1900/65A-00-00-01-00-00

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A-00-00-01-00-00 is a configured 1900/65A general-purpose equipment monitor for vibration and temperature monitoring of industrial machinery.

1900/65A-00-01-01-00-01

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A-00-01-01-00-01 is a configured 1900/65A general-purpose equipment monitor for vibration and temperature monitoring of industrial machinery.

1900/65A-00-01-01-01-01

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A-00-01-01-01-01 is a configured 1900/65A general-purpose equipment monitor with 4 transducer inputs, 4 temperature inputs, 6 relay outputs, four 4-20 mA recorder outputs and Modbus over Ethernet and RS232/485.

1900/65A-01-00-01-00-00

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A-01-00-01-00-00 is a configured 1900/65A general-purpose equipment monitor for vibration and temperature monitoring of industrial machinery.

1900/65A-01-00-01-01-00

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A-01-00-01-01-00 is a configured 1900/65A general-purpose equipment monitor for vibration and temperature monitoring of industrial machinery.

1900/65A-01-01-01-00-00

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A-01-01-01-00-00 is a configured 1900/65A general-purpose equipment monitor for vibration and temperature monitoring of industrial machinery.

1900/65A-01-01-01-00-01

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A-01-01-01-00-01 is a configured 1900/65A general-purpose equipment monitor for vibration and temperature monitoring of industrial machinery.

1900/65A-01-01-03-01-00

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A-01-01-03-01-00 is a configured 1900/65A general-purpose equipment monitor for vibration and temperature monitoring of industrial machinery.

1900/65A-01-01-04-01-00

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A general purpose equipment monitor. Configuration 1900/65A-01-01-04-01-00.

1900/65A-01-02-01-00-00

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A general purpose equipment monitor. Configuration 1900/65A-01-02-01-00-00.

1900/65A-167699-02

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A general purpose equipment monitor. Configuration 1900/65A-167699-02.

1900/65A-172323-01

1900/65A General Purpose Equipment Monitor

Bently Nevada 1900/65A general purpose equipment monitor. Configuration 1900/65A-172323-01.

19000-00-07-06-02

Proximity ProbeBently Nevada

Proximity Probe

Bently Nevada 19000-00-07-06-02 is a vibration proximity probe for shaft position and vibration measurement in machinery protection systems.

19000-00-95-12-02

Proximity ProbeBently Nevada

Proximity Probe

Bently Nevada 19000-00-95-12-02 is a proximity probe providing precise non-contact measurements of shaft position and vibration for rotating equipment, 9.5 in length, 10 kHz to 1 MHz operating frequency.

190501

Velomitor Velocity Transducer

Bently Nevada Velomitor velocity transducer (190501) for vibration measurement on the 3500 machinery protection system.

190501-00-00-00

Velomitor CT Velocity Transducer

Bently Nevada 190501-00-00-00 Velomitor CT velocity transducer. 316L stainless steel case, MIL-C-5015 connection, no stud, no approvals. Operating temperature -40 to +85 C.

190501-00-00-02

Velomitor CT Velocity Transducer

Bently Nevada 190501-00-00-02 Velomitor CT velocity transducer. No stud, MIL-C-5015 connection, agency approval option 02 (stud M6x1 with 3/8-in 24 adapter). Net weight 0.3 kg.

190501-00-00-04

Velomitor CT Velocity Transducer

Bently Nevada 190501-00-00-04 Velomitor CT velocity transducer. 316L stainless steel case, MIL-C-5015 connection, multiple agency approvals (CSA/NRTL/C, ATEX/IECEx/CSA).

190501-01-00-00

Velomitor CT Velocity Transducer

Bently Nevada 190501-01-00-00 Velomitor CT velocity transducer. Stud 3/8-in 24 to 3/8-in 24, MIL-C-5015 connection, no approvals. Unit weight 0.30 kg.

190501-01-00-01

Velomitor CT Velocity Transducer

Bently Nevada 190501-01-00-01 Velomitor CT velocity transducer.

190501-01-99-01

Velomitor CT Velocity Transducer

Bently Nevada 190501-01-99-01 Velomitor CT velocity transducer. Stud 3/8-in 24 to 3/8-in 24, supplied with included 32-foot cable, multiple approvals.

190501-02-00-04

Velomitor CT Velocity Transducer

Bently Nevada 190501-02-00-04 Velomitor CT velocity transducer. Stud 3/8-in 24 to 1/2-in 20, MIL-C-5015 connection, stud M6x1 with 3/8-in 24 adapter.

190501-02-99-00

Velomitor CT Velocity Transducer

Bently Nevada 190501-02-99-00 Velomitor CT velocity transducer. Stud 3/8-in 24 to 1/2-in 20, supplied with included 32-foot cable, no approvals.

190501-03-00-00

Velomitor CT Velocity Transducer

Bently Nevada 190501-03-00-00 Velomitor CT velocity transducer. Adhesive stud 3/8-in 24, MIL-C-5015 connection, no approvals.

190501-04-00-00

Velomitor CT Velocity Transducer

Bently Nevada 190501-04-00-00 Velomitor CT velocity transducer. Stud M6x1 with 3/8-in 24 adapter, MIL-C-5015 connection, no approvals.

190501-04-00-04

Velomitor CT Velocity Transducer

Bently Nevada 190501-04-00-04 Velomitor CT velocity transducer.

190501-07-00-00

Velomitor CT Velocity Transducer

Bently Nevada 190501-07-00-00 Velomitor CT velocity transducer. Plate stud 3/8-in 24 to 3/8-in 24, MIL-C-5015 connection, no approvals.

190501-07-00-01

Velomitor CT Velocity Transducer

Bently Nevada 190501-07-00-01 Velomitor CT velocity transducer. Plate stud 3/8-in 24 to 3/8-in 24, MIL-C-5015 connection, multiple approvals.

190501-08-00-00

Velomitor CT Velocity Transducer

Bently Nevada 190501-08-00-00 Velomitor CT velocity transducer. Plate stud 3/8-in 24 to 1/2-in 20, MIL-C-5015 connection, no approvals.

190501-09-00-00

Velomitor CT Velocity Transducer

Bently Nevada 190501-09-00-00 Velomitor CT velocity transducer. Plate stud 3/8-in 24 to 1/4-in NPT, MIL-C-5015 connection, no approvals.