Parts catalogue

Node Address Jumper

Honeywell 51153818-202 node address jumper for Honeywell process control systems. Gray plastic jumpers with visible two-digit numbers to assign each node a unique address. Approvals CE, TUV, UL508, CSA.

51153818-203

Jumper Kit

Honeywell 51153818-203 jumper kit for the TotalPlant Solution (TPS) system, connecting I/O modules to the backplane of Honeywell controllers. Wire jumpers, 2.54 mm pitch, 21-30 jumpers per kit.

51153818-204

Jumper Kit

Honeywell 51153818-204 jumper kit for creating or breaking electrical connections in PLCs and distributed control systems (DCS). Conductive copper with PVC insulation; jumpers can be added or removed to modify functionality.

51190102-300

Resistor

Honeywell

250 Ohm Dummy Resistor

Honeywell 250 ohm dummy/range resistor used in TDC 3000 process control wiring.

Contact for wholesale

51190413-213

Power Supply Module

Honeywell power supply module from the 51190413 family (sibling -093 is a Honeywell modular power supply).

51190523-225

RelayHoneywell

Relay

Honeywell relay (51190523 family) used in TDC 3000 process control; built for Honeywell by Grayhill.

51190584-150

FuseHoneywell

Slow-Blow Fuse, 0.5A

Honeywell slow-blow (SLO-BLO) fuse rated 0.5 A for TDC 3000 equipment.

51190585-100

Battery ChargerHoneywell

Controller Memory Backup RAM Charger Assembly

Honeywell 51190585-100 controller memory backup module (RAM charger assembly) for Experion PKS systems. Supplies backup power to maintain volatile memory in S8 C300 controllers (up to 4 units), with redundant power inputs and Experion soft-failure alarm.

51190728-105

LCN Coaxial Tee Connector Module

Honeywell 51190728-105 tee connector module for Local Control Network (LCN) coaxial configurations in TDC 3000 distributed control systems, enabling signal branching between system nodes. Inline coaxial integration.

51190896-100

Cable Set

Honeywell TDC 3000 cable set assembly.

51192139-114

Cable, 250 ft

Honeywell TDC 3000 cable assembly, 250 ft (EC).

51192269-230

Battery ChargerHoneywell

Controller Memory Backup RAM Charger Assembly

Honeywell 51192269-230 controller memory backup module (RAM charger assembly) for Experion PKS systems, supplying backup power to safeguard controller memory during outages for up to 4 physical S8 C300 controllers. Redundant power inputs, Experion soft-failure alarm.

51192418-100

ResistorHoneywell

Terminating Resistor

Honeywell 51192418-100 terminating resistor for industrial control network wiring.

51195066-200

Power Supply, 8.75/5.25A

Honeywell TDC 3000 power supply, 8.75 A / 5.25 A output, 120/240 VAC input (chassis power supply family).

51195153-001

Coaxial Drop Cable

Honeywell 51195153-001 coaxial drop cable for distributed control network connectivity.

51195153-002

RG6 Coaxial Drop Cable Set

Honeywell 51195153-002 is an RG6 coaxial cable assembly used in Honeywell control and data acquisition systems, especially Universal Control Network (UCN) applications. Length 2 m, factory-terminated connectors, operating temperature -40 C to +85 C.

51195153-003

UCN Coaxial Drop Cable Set

Honeywell TDC 3000 Universal Control Network (UCN) RG-6 coaxial drop cable set connecting controller drops to the UCN trunk.

51195153-008

Automation Cable

Honeywell 51195153-008 automation cable for power and signal transmission in industrial control systems. Weight approx. 100 g, package 200 x 120 x 100 mm.

51195153-010

UCN Coaxial Drop Cable Set, 10M

Honeywell TDC 3000 UCN 10-metre RG-6 coaxial drop cable set (MU-NKD010) with UCN A and UCN B ends.

51195153-900

DCS Electric Cable

Honeywell 51195153-900 industrial-grade electric cable for Honeywell Distributed Control Systems (DCS), used for automation, control and signal transmission within Honeywell system architectures.

51195153-903

Drop Cable Set

RG6 drop cable set (3.5 m) for Honeywell control network systems.

51195162-100

Connector Kit

Honeywell TDC 3000 connector kit for control system wiring/cabling.

51195199-005

UCN Coaxial Cable and Tap Assembly

Honeywell 51195199-005 is a Universal Control Network (UCN) cable and tap assembly for TDC 3000 systems. 3 m (10 ft) length, 0.25 in diameter, PVC, 2 taps, 1500 V dielectric strength, 100 MOhm insulation resistance.

51195199-010

Coaxial Drop Cable Assembly

Honeywell 51195199-010 is a coaxial drop cable assembly for industrial control systems. 10 m length, copper conductor, Teflon insulation, precision coaxial connectors, operating temperature -40C to +85C.

51195199-020

UCN Trunk Cable

Honeywell 51195199-020 UCN trunk cable is an RG-11 coaxial cable for Universal Control Network systems. 20 m, 75 Ohm impedance, 300 V rating, solid copper conductor 1.63 mm, polyethylene jacket, -40C to +85C.

51195466-400

System Interconnect Cable Assembly

Honeywell 51195466-400 is a shielded industrial cable assembly for TDC 3000 and Universal Station platforms, providing system interconnect and signal transmission with EMI/RFI shielding and factory-terminated connectors.

51195476-200

Coaxial Cable Set

Honeywell TDC 3000 coaxial cable set (51195476 family; sibling -100 is a coax cable, LOC4C6).

51195476-500

Coaxial Cable Set

Honeywell TDC 3000 coaxial cable set (51195476 family; sibling -100 is a coax cable, LOC4C6).

51195479-100

I/O Link Interface Cable, 2-Drop

Honeywell 51195479-100 is a 2-drop I/O Link interface cable for Series C / C300 / Experion PKS control systems, connecting two IOTA modules. 300 V rating, full EMI/RFI braided shielding.

51195479-200

I/O Link Cable Set, 3-Drop

Honeywell 51195479-200 is a flexible I/O Link cable (3-drop) for connecting Honeywell control modules to peripheral devices. 1.5 m length, CE compliant, origin USA.

51195479-300

I/O Link Cable Assembly

Honeywell 51195479-300 is a factory-terminated I/O Link cable assembly for Honeywell DCS and PLC systems. Flame-retardant PVC insulation, EMI-resistant braided and foil shielding, operating temperature -20C to +80C, origin USA.

51195479-400

I/O Link Cable Assembly

Honeywell 51195479-400 I/O Link cable assembly from the 51195479 series for Honeywell control systems.

51195479-500

I/O Link Cable Assembly

Honeywell 51195479-500 is a rugged I/O Link cable assembly (Rev D, N-4117) for Honeywell DCS systems, with proprietary connectors for secure connection. Origin USA.

51195904-106

Video/Copier Cable

Honeywell TDC 3000 video/copier cable assembly (51195904 family; sibling -006 is a video copier cable).

51195904-206

Video/Copier Cable

Honeywell TDC 3000 video/copier cable assembly (51195904 family; sibling -006 is a video copier cable).

51196041-100

LCN A-B TEE Connector Set

Honeywell 51196041-100 is a non-resistor LCN A-B TEE connector set for Honeywell's Local Control Network. BNC connector, 75 Ohm impedance, 24 VDC / 1 A rating, IP67, brass alloy, -40C to +85C.

51196653-100

TDC 3000 Five-Slot File Power Supply

Honeywell 51196653-100 is a five-slot power supply module for the TDC 3000 distributed control system, supplying power to up to five modules. Dimensions 216 x 160 x 30 mm. Origin USA.

51196654-100

Power Supply Module

Power supply module from the Honeywell 51196xxx TDC 3000 series.

51196655-100

Dual-Node Power Supply Module

Honeywell 51196655-100 is a dual-node power supply module for the TDC 3000 DCS, providing redundant 24V DC power, 5A per node, 1500V isolation. Dimensions 110 x 100 x 45 mm. Origin USA.

51196742-100

Industrial Computer Cable

Honeywell 51196742-100 industrial computer cable with D-Sub 9-pin female to 15-pin male connectors for industrial automation systems.

51196742-200

Industrial Cable Cordset

Honeywell 51196742-200 shielded industrial cable cordset for TDC 3000 and Universal Station platforms, with EMI/RFI shielding and factory-terminated connectors.

51196742-400

Industrial Cable

Honeywell 51196742-400 heavy-duty industrial cable with copper conductor and PVC insulation/jacket, rated 600 V, 20 A.

51196742-500

Industrial Communication Cable

Honeywell 51196742-500 multi-core shielded industrial communication cordset for Honeywell DCS/PLC controller-to-I/O wiring. 24 AWG tinned copper, approx. 2.4 m, factory-molded connectors.

51196990-500

Serial Extension Cable

Honeywell 51196990-500 RS-232 serial extension cable, DB9 male to DB9 female, shielded PVC jacket, 2.4 m, for industrial computers and control systems.

51197593-100

BatteryHoneywell

Replacement Lithium Battery

Honeywell 51197593-100 replacement lithium battery for Honeywell TC series controllers and modules. 3.6 V, ~1200 mAh, lithium manganese dioxide chemistry. Alternate part TC-BATT01.

51198066-502

Power Supply Module

Honeywell 51198066-502 power supply module for Honeywell control systems.

51198651-100

HPM Power Supply Module

Honeywell 51198651-100 HPM power supply module (SPS5785) for Honeywell DCS / TDC 3000 systems.

51198685-100

Power Supply Module

Honeywell 51198685-100 power supply module (SPS5710) for Honeywell DCS / TDC 3000 systems.