Parts catalogue

easYgen-1500 Genset Controller

Woodward easYgen-1500 series single-unit genset controller variant for standby/non-paralleling generator applications. Full Woodward order codes are in the 8440-xxxx range.

1751-147

Processor ModuleWoodward

MPU Transformer Module

Woodward 1751-147 MPU transformer module, a signal conditioning unit for turbine and generator control systems. Interfaces with magnetic pickup (MPU) sensors for speed measurement; 4-channel design, compatible with Woodward MicroNet control systems.

2301A

Load Sharing and Speed Control

Woodward 2301A electronic load sharing and speed control for diesel/gas engines and steam/gas turbines; isochronous or droop operation. Orderable variants are 9905-xxx / 9907-xxx.

2500

Genset Controller

Woodward

easYgen- Genset Controller

Woodward easYgen-2500 genset controller capable of synchronizing and load sharing up to 16 gensets in island or parallel operation; CANopen/Modbus communications. Full order codes are 8440-xxxx.

Contact for wholesale

2500-5

easYgen- Genset Controller

Woodward easYgen-2500-5 genset controller; synchronizes and load shares up to 16 gensets, 128x64 graphical LC display, CANopen/Modbus. Full order codes are 8440-xxxx.

3200-5

easYgen- Genset Controller

Woodward easYgen-3200-5 digital genset/generator controller with synchronization, load sharing and protection; 5.7-inch LCD, Ethernet/USB, CAN/SAE-J1939. Full order codes are 8440-xxxx (e.g. 8440-2050).

3500-P1

easYgen-3500 Genset Controller

Woodward easYgen-3500 series digital genset/generator controller (P1 variant) for synchronization, load sharing and protection. Full order codes are 8440-xxxx.

3500XT

easYgen Generator Controller

Woodward easYgen-3500XT generator/genset control unit.

5421-123

Digital Governor System

The Woodward 5421-123 is an engine control component providing precise control of engine speed and performance for diesel, gasoline, and natural gas engines. Operates at 24V, 5A.

5430-856

Control BoardWoodward

Extender Card

The Woodward 5430-856 is an engine control extender card used in gas and diesel engine control systems.

5432-157

PLC ModuleWoodward

PLC Module

The Woodward 5432-157 is a PLC module with 8 inputs and 4 outputs, 24 VDC input, 1 A output. Operating temperature -20 to 60 C.

5437-027

Speed Controller Module

The Woodward 5437-027 speed controller module accepts 10-32 VDC input and provides 0-10 VDC output with +/-0.5% accuracy and 50 ms response time. Operating temperature -40 to +85 C.

5437-051

32 Channel Relay Interface Module

The Woodward 5437-051 is a solid-state relay interface module for industrial control. 24V DC input, 0-10V DC output, 5A rated.

5437-053

Field Terminal Module

The Woodward 5437-053 is a field terminal module that interfaces sensors and devices via VMEbus, acting as a termination point for analog field wiring. 2 mA excitation, 0.5% accuracy.

5437-054

NetCon Field Terminal Module

The Woodward 5437-054 is a NetCon Field Terminal Module from the 5400 Series, providing a connection point for field devices in turbine control systems. 24 VDC input.

5437-078

NetCon Main Chassis

The Woodward 5437-078 is the main chassis for the NetCon 5000 I/O system, housing NetCon 5000 I/O modules in industrial control applications.

5437-079

NetCon Duplex Field Terminal Module

The Woodward 5437-079 is a NetCon Duplex Field Terminal Module for relay control in turbine/industrial control systems. Operating temperature 0 to 55 C.

5437-080

NetCon Field Terminal Module

The Woodward 5437-080 is a NetCon Field Terminal Module from the 5400 Series with a 37-pin connector and cage-clamp terminals, connecting field wiring to I/O modules in the MicroNet control system. 24V DC input.

5437-081

Control ModuleWoodward

ProTech-GII Turbine Speed Control Module

The Woodward 5437-081 is part of the ProTech-GII series for turbine speed control. 24 Vdc power input, Class 1 Div 2, with independent RS-232 and RS-422 serial ports and low-current PWM output.

5437-092

Expansion Chassis

The Woodward 5437-092 is an expansion chassis for Woodward control systems.

5437-173

NetCon Field Terminal Module

The Woodward 5437-173 is a NetCon Field Terminal Module with two Ethernet ports, two serial ports, four analog inputs, two analog outputs, eight digital inputs, and four digital outputs for industrial control networks.

5437-281

Analog Field Terminal Module

The Woodward 5437-281 is an analog field terminal module with 12 analog input channels, 4 analog output channels, a 37-pin connector and 14-bit converters for precise signal processing in industrial control systems.

5437-282

Field Terminal Module

The Woodward 5437-282 is a field terminal module available in low-voltage (20-40 Vdc) and high-voltage (88-132 Vac or 90-150 Vdc) models, minimum 15 W power capacity, for actuator control in industrial systems.

5437-283

Analog Field Terminal Module

The Woodward 5437-283 is a field terminal module available in low-voltage (20-40 Vdc) and high-voltage (88-132 Vac or 90-150 Vdc) models, minimum 15 W power capacity, for industrial control applications.

5437-406

LinkNet Field Termination Module

The Woodward 5437-406 is a LinkNet Field Termination Module connecting field devices to control systems, supporting Ethernet/IP, Modbus TCP, and PROFINET. CE, UL certified.

5437-417

LinkNet Field Termination Module

The Woodward 5437-417 is a LinkNet field termination module for Woodward industrial control systems.

5437-418

Analog Derivative Field Termination Module

The Woodward 5437-418 is an Analog Derivative Field Termination Module (FTM) connecting field wiring to MicroNet control I/O modules, with cage-clamp terminals and subminiature D-type connectors.

5437-465

LinkNet Field Terminal Module

The Woodward 5437-465 is a LinkNet Field Terminal Module for industrial control systems, providing low-current PWM output for microprocessor synchronizers. This product has been discontinued by the manufacturer.

5437-523

Analog Field Terminal Module

The Woodward 5437-523 is an analog field terminal module with VMEbus interface, 2 mA excitation, 0.5% accuracy, 1500 Vac continuous isolation, and 2.2 Mohm input impedance.

5437-524

Analog Field Terminal Module

The Woodward 5437-524 is an analog field terminal module for continuous analog signals, with standard screw-clamp terminals and a 37-pin connector for flexible field wiring.

5437-672

NetCon Field Terminal Module

The Woodward 5437-672 is a NetCon Field Terminal Module from the 5400 Series, connecting field devices such as sensors and actuators to turbine control systems. 24V DC input.

5437-686

NetCon Field Terminal Module

The Woodward 5437-686 is a module for industrial process control with 24V DC input/output, Ethernet and RS485 communication, and 64KB memory.

5437-687

Control ModuleWoodward

Control Module

The Woodward 5437-687 is a control module for Woodward industrial control systems.

5437-843

MicroNet 6 I/O Slot Chassis

The Woodward 5437-843 is a MicroNet 6 I/O slot chassis module for engine synchronization and load sharing in generator sets, with PWM and analog inputs/outputs.

5437-860

PLC ModuleWoodward

Programmable Logic Controller Module

The Woodward 5437-860 is a PLC module with 16 input and 16 output channels, 24V DC, Modbus and Profibus communication, operating -20 to 60 C.

5439-273

Governor Module

The Woodward 5439-273 is a governor module for precise engine speed control. 24V, 5A, with low-current PWM output and certification for hazardous (explosive-atmosphere) locations.

5439-754

NetCon Expansion Chassis

The Woodward 5439-754 is a NetCon Expansion Chassis that extends NetCon systems, compatible with the NetCon 3B Simplex and NetCon 5000 I/O Chassis Modules. This product has been discontinued by the manufacturer.

5439-861

DCS ModuleWoodward

DCS Module

The Woodward 5439-861 is a distributed control system (DCS) module with 24V DC input, 0-10V DC output, 2A rated current, Modbus RTU communication, operating -40 to +85 C.

5439-927

Digital Governor System

The Woodward 5439-927 is a digital governor system for precise control and monitoring of industrial machinery. 24V, 5A, hot-plug capable.

5439-966

NetCon Expansion Chassis

The Woodward 5439-966 is a NetCon expansion chassis with generator synchronization, power factor and load control, an integrated LCD display, and 24V DC supply.

5439-984

Digital Controller Module

The Woodward 5439-984 is a digital controller module with 24V DC input, 0-10V DC output, Modbus communication and NetCon network compatibility. Operating -40 to 85 C; CE, UL certified.

5439-986

Speed Control Module

The Woodward 5439-986 is a speed control module for motors, generators, turbines and other rotating equipment. 24V, 5A; CE, UL certified.

5441-413

32 Channel Relay Interface Module

The Woodward 5441-413 is a 32-channel relay interface module that switches electrical loads on or off, interfacing a control system such as a PLC with relays.

5441-419

10 Amp ISO Relay Interface Module

The Woodward 5441-419 is a 10 Amp ISO relay interface module that bridges control systems and system components for reliable signal transmission in demanding environments.

5441-629

Relay Interface Module

The Woodward 5441-629 is a relay interface unit bridging control systems and external devices in automation applications. Relays rated to 5 A; CE, UL certified.

5441-637

Relay Interface Module

The Woodward 5441-637 is a relay interface module for Woodward industrial control systems.

5441-645

505 Digital Microprocessor Controller

The Woodward 5441-645 is a component of the Woodward 505 control system for single or dual actuator steam turbines, converting control signals into hydraulic signals to manage the main steam valve. 24V DC input, RS485, 10A.

5441-661

10 Amp Relay Interface Module

The Woodward 5441-661 is a 10 Amp relay interface module from the 5400 Series for turbine control systems, bridging the control system (microcontroller or PLC) and relays. 125 V DC power supply.