Truck parts · industrial supply · earthmoving machinery · wholesale
Menu
+86 139 1709 3163WeChat — A170416617
Search level switch references by OEM, aftermarket, Kaysan, or manufacturer number. Each result links to a crawlable part page and wholesale enquiry.
Shridhan bilge level switch. 316 stainless steel stem, float, body plates and slosh shield. 2 m heavy-duty XLPE-sheathed 18/3-core cable rated 600 V. SPDT reed Form C, 50 VA contact rating, max 1.5 A AC/DC, max 250 V AC/DC. Float SG 0.62. Max temperature 125C, max pressure 12 bar. Ingress protection IP68.
Deckma OMD-24 bilge alarm unit designed for use with 15 ppm oil-water separator units, exceeding IMO MEPC.107(49) requirements for 15 ppm bilge alarms. Supplied with 2 works-adjusted alarms at 15 ppm.
Valcom ASL Series level switch for marine and on-land liquid detection, pump control, water ingress alarm and overfill protection. Works on Valcom's proprietary distributed acoustic-wave-in-a-metal-rod principle. Suitable for liquids with or without foam, compliant with IMO and class requirements.
VEGA EL 1 conductive rod electrode with PTFE insulation, a universal level switch for conductive liquids. Rod up to 4 m long, with extended temperature range. Ideal as overfill and dry-run protection with VEGATOR 131/132 controllers. Process temperature -50 to 130 degC.
VEGA EL 3 conductive multiple rod electrode with PTFE insulation. With 2 to 5 rods, switching points between 5 cm and 6 m can be realized. Universal level switch for conductive liquids; ideal as overfill, dry-run protection or pump control with VEGATOR 130 series controllers.
VEGA EL 4 conductive multiple rod electrode with PP insulation. With 2 to 5 rods, switching points between 10 cm and 4 m can be realized. Universal level switch for conductive liquids; ideal as overfill, dry-run protection or pump control with VEGATOR 132 controllers.
VEGA EL 6 conductive multiple cable electrode with FEP insulation. With 2 to 5 cables, switching points between 22 cm and 60 m can be realized. Universal level switch for conductive liquids; ideal as overfill, dry-run protection or pump control with VEGATOR 132 controllers.
VEGA EL 8 conductive rod electrode with PE insulation, a universal level switch for conductive liquids. Rod up to 3 m long. Ideal as overfill or dry-run protection with VEGATOR 131/132 controllers. Process temperature -10 to 60 degC, process pressure -1 to 6 bar, G1/2 threaded connection.
Finetek FA series cable float switch. PVC float, micro switch 3A/125/250Vac NO, specific gravity 0.8, operating temperature 0-60 C, IP68, 3m neoprene cable.
Finetek FC series compact magnetic mini float level switch operating on buoyancy and magnetism principles.
Finetek FD3001 mini magnetic float level switch. Float 28 x 28mm SG 0.7, 1/8 inch PF screw connection, SUS304, top/bottom mounting, switching capacity 50W 240Vac/200Vdc SPST, N.C. reversible contact.
Finetek FD series compact magnetic mini float level switch operating on buoyancy and magnetism principles.
Finetek FD series ATEX explosion-proof magnetic float level switch. Aluminum housing IP65, 3 inch flange connection, stem diameter 9.5mm SUS304, S2 float 41 x 38 x 11mm SG 0.7 SUS316.
Finetek FD series vertical magnetic float level switch operating on buoyancy and magnetism principles, with a stationary stem and magnet-equipped float.
The FineTek FC/FD series is a magnetic float level switch based on buoyancy and magnetism. The floats are designed for a specific minimum fluid density (specific gravity) based on float volume and weight.
The FineTek FD series mini magnetic float level switch is compact and cost-effective, operating on the principles of buoyancy and magnetism. The float is designed for a specific minimum fluid density and specific gravity.
The FineTek FF series is a side-mount magnetic float level switch using buoyancy and magnetism for high, low, and intermediate-level detection of fluids with specific gravity as low as 0.25.
The FineTek FF series is a side-mount magnetic float level switch using buoyancy and magnetism for high, low, and intermediate-level detection of fluids with specific gravity as low as 0.25.
Endress+Hauser Minicap FTC262 capacitance rope-probe point level switch for detection of light bulk solids such as grain, flour, milk powder, animal feed, cement and gypsum, with active build-up compensation.
Endress+Hauser Nivector FTC968 compact capacitive point level switch for powdery and fine-grained bulk solids in silos and hoppers, with G1 process connection and LED status indication.
Endress+Hauser Nivector FTC968Z capacitive point level switch (DC version) for powdery and fine-grained bulk solids in silos and hoppers.
The Endress+Hauser Liquiphant II FTL360 is a vibronic point level switch for liquids.
The Endress+Hauser Liquiphant FTL51B is a vibronic point level switch for the process industry, suitable for SIL2 and SIL3 applications with intuitive proof-test wizards and automated documentation.
The Endress+Hauser Nivocompact FTM230 is a vibrating tuning-fork level limit switch for point level detection in tanks and vessels, with an aluminium IP55 housing, 220 V AC supply and process pressure up to 16 bar.
Rochester Sensors T/LL70 series vertical float switch for liquid level detection.
Marine float level controller UQK-01-C, horizontal mounting, widely used in ship and chemical industry for two-position level control and alarm. Materials: stainless steel, copper, aluminium. Standard flange OD 120mm, PCD 102mm. Rated 250V.
UQK-01-C-Z is a marine float level controller with test device, designed for easy maintenance. Control range 10-30 mm; contact capacity 250V/10A; protection IP66/IP68; explosion proof Exd IICT6; medium temperature up to 120 C; dimensions 355 x 220 x 220 mm.
Adjustment-free capacitive point level sensor for liquids, including non-conductive containers. Rod probe fully PTFE or PFA insulated, sensor length up to 4 m. Typical applications are overfill and dry-run protection for adhesive and conductive liquids; operates from a dielectric constant of 1.5.
Adjustment-free capacitive point level sensor for bulk solids. Cable probe fully PE/PA insulated, sensor length up to 20 m. Used for overfill and dry-run protection; operates from a dielectric constant of 1.5. Process temperature -40 to 80 C.
Capacitive point level sensor, rod probe partly PTFE insulated, for liquids and bulk solids, sensor length up to 6 m. Process temperature -50 to 200 C, process pressure -1 to 64 bar.
Capacitive point level sensor, rod probe fully PE or PTFE insulated, for non-abrasive liquids and bulk solids, sensor length up to 6 m. Process temperature -50 to 200 C, process pressure -1 to 64 bar.
Capacitive point level sensor, rod probe fully PTFE insulated, for non-abrasive liquids and bulk solids, sensor length up to 4 m. Particularly suitable for viscous and adhesive products.
Capacitive point level sensor, cable probe partly PTFE insulated, for liquids and bulk solids, sensor length up to 32 m. Process temperature -50 to 200 C, process pressure -1 to 64 bar.
Capacitive point level sensor, cable probe fully PTFE insulated, for non-abrasive liquids and bulk solids, sensor length up to 32 m. Process temperature -50 to 150 C, process pressure -1 to 40 bar.
Capacitive point level sensor, rod probe partly ceramic insulated, for bulk solids at high temperatures up to +400 C, sensor length up to 32 m. Process temperature -50 to 400 C, process pressure -1 to 16 bar.
Capacitive point level sensor for aggressive liquids in non-conductive vessels. Double rod probe fully FEP insulated, sensor length up to 4 m. Process temperature -50 to 100 C, process pressure -1 to 2 bar.
Adjustment-free economical capacitive point level sensor for liquids and bulk solids, rod probe made of PP, sensor length up to 2 m. Suitable as overfill or dry-run protection in adhesive, conductive products; operates from a dielectric constant of 1.5.
VEGA VEGAKON 61 conductive limit switch for conductive liquids with partial PTFE insulation, for front-flush mounting. Ideally suited as full or empty detector in pipelines. Process temperature -40 to 150 degC, process pressure -1 to 25 bar.
Conductive limit switch for conductive liquids with 2 to 3 rods, providing switching points between 12 cm and 4 m. Suitable as a full or empty detector in pipelines. Process temperature -40 to 100 C, process pressure -1 to 6 bar, relay (DPDT) output, protection rating IP66/IP67.
Low-cost ultra-compact capacitive limit switch for the detection of water-based liquids. From DK > 2, thread from 1/2 inch, universal connection G1 inch for hygiene adapter, M12 connector, transistor output.
Low-cost compact capacitive limit switch for the detection of water-based liquids. From DK > 1.5, thread from 1/2 inch, universal connection G1 inch for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, Ex and hygiene approvals.
Compact capacitive limit switch with remote switching point (tube version up to 1 m) for the detection of water-based liquids. From DK > 1.5, thread from 1/2 inch, universal connection G1 inch for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, Ex and hygiene approvals.
Compact capacitive limit switch designed for level detection of very adhesive media, reliably detecting coverage even with strong buildup. From DK > 1.5, thread from 1/2 inch, universal adapter G1 inch for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, Ex and hygiene approvals.
Low-cost compact capacitive limit switch for the detection of light bulk solids. Thread from 1/2 inch, universal connection G1 inch for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, hygiene approvals.
Compact universal vibrating-fork level switch for liquids with a stainless steel housing. Detects the limit level reliably with millimetre accuracy independent of mounting position.
Universal vibrating-fork level switch for liquids (density > 0.5 to 2.5 g/cm3) with tube extension; switching point up to 1 m from the installation location. Detects the limit level reliably with millimetre accuracy independent of mounting position.
Compact universal vibrating-fork level switch for all liquids (density > 0.5 to 2.5 g/cm3). Detects the limit level reliably with millimetre accuracy independent of mounting position. Numerous process fittings, approvals, housing and electronics versions.
Universal vibrating-fork level switch for all liquids (density > 0.5 to 2.5 g/cm3) with tube extension; switching point up to 6 m from the installation site. Numerous process fittings, approvals, housing and electronics versions.