Parts catalogue

Power Supply Module

ABB Procontic power supply module, type 07NG61R2.

07PS62R2

Power Supply Module

ABB Procontic power supply module, type 07PS62R2.

10012279

SDCS-POW-1 Power Supply Board

ABB SDCS-POW-1 power supply board for DCS DC drives, part number 10012279.

115M7750-01

High-Voltage AC Power Input Module

Bently Nevada 115M7750-01 high-voltage AC power input module for industrial control/3500 racks. Input 175-264 VAC, 220 VAC nominal output, 47-63 Hz, half-height, supports redundant configuration.

125840-01

3500/15 High Voltage AC Power Input Module (PIM)

Bently Nevada 3500/15 high voltage AC power input module. A half-height module installed on the left side of the 3500 rack, which can house one or two power supplies (AC and/or DC) with either able to power the full rack; a second supply serves as backup.

125840-02

3500/15 Power Input Module

Bently Nevada 3500/15 power input module (125840-02 variant) for the 3500 series rack.

129478-01

3500/15 High Voltage DC Power Input Module (PIM)

Bently Nevada 3500/15 high voltage DC power input module. Half-height module installed on the left side of the 3500 rack, providing a reliable DC power source. The rack can house one or two AC/DC power supplies. Made in U.S.A.

133300-01

3500/15 Low Voltage DC Power Input Module (PIM)

The Bently Nevada 133300-01 is a 3500/15 low voltage DC power input module installed in the dedicated slots on the left side of the 3500 rack. Racks accept one or two supplies in AC/DC combinations, with the lower supply primary and the upper as backup.

141378-01

1701/10 FieldMonitor 24 V DC Power Supply

The Bently Nevada 1701/10 24 V DC power supply fits a dedicated slot in the 1701/05 or 1701/06 FieldMonitor terminal base and provides logic and transducer voltages to other FieldMonitor modules. Input voltage range +18 V to +36 V DC.

16809-541/4

Power Supply ModuleMoore Products

Critical Discrete Module Power Supply

Moore Products / Siemens QUADLOG Critical Discrete Module power supply (PSCDM 24 VDC), part 16809-541/4, used in QUADLOG safety/process control systems.

1719-0017/18

Power Supply ModuleGE

SR P600 Power Supply Board

GE SR P600 series power supply board (1719-0017/18) for power distribution in control systems, substations, and industrial automation. Weight approx 500 g.

1734-EP24DC

Power Supply ModuleAllen-Bradley

POINT I/O 24V DC Expansion Power Supply

Allen-Bradley 1734-EP24DC POINT I/O 24V DC expansion power supply. Input 10 to 28.8V DC, up to 10 A, supports 4 to 17 modules depending on current draw.

1KHL178016R0001F PSM03

PSM03 Power Supply Module

ABB 1KHL178016R0001F (PSM03) is a power supply module for ABB Relion 630-series automation systems. Input 100-240 VAC 50/60 Hz, output 24 VDC regulated, 3 A nominal (~72 W). DIN rail or rack mount.

1MRK002239-BA

PSM Power Supply Module

ABB 1MRK002239-BA power supply module (PSM), DC 90-250 V, for ABB protection relay platforms.

1MRK002239-BBR01

PSM Power Supply Module

ABB 1MRK002239-BBR01 power supply module (PSM) for industrial protection and control applications. Wide DC input range.

1MRK002239-BBR02

PSM Power Supply Module

ABB 1MRK002239-BBR02 power supply module (PSM), 90-250 VDC input, for protection relay platforms.

1MRK002239-BBR03

PSM Power Supply Module Card

ABB 1MRK002239-BBR03 power supply module (PSM), 90-250 VDC, supplies regulated DC power to ABB protection relays.

1MRK002239-BBR04

PSM Power Supply Module

ABB 1MRK002239-BBR04 power supply module, 90-250 VDC input, for ABB protection and automation platforms.

1MRK002239-BBR05

PSM Power Supply Module

ABB 1MRK002239-BBR05 power supply module, 90-250 VDC input, 24 VDC output, for industrial automation systems.

1MRK002246-BB

Power Supply Module

ABB 1MRK002246-BB power supply board, 100-240 VAC input, 24 VDC output, for ABB protection and automation systems.

1MRK002246-BDR01

Power Supply Module

ABB 1MRK002246-BDR01 single-phase AC/DC power converter, 100-240 VAC input, regulated 24 VDC output, DIN-rail mountable.

1SVR427071R0000

CP-A RU Redundancy Unit

ABB CP-A RU redundancy unit accessory for CP-A range power supplies.

1SVR427075R0000

CP-A CM Control Module

ABB CP-A CM control/monitoring module accessory for CP-A range power supplies.

1X00024H01

Power Supply ModuleEmerson Ovation

Ovation Power Supply Module

Emerson Ovation WH1-2FF power supply module providing AC-to-24VDC conversion (100-240VAC input, 24VDC main and auxiliary outputs, up to 500W) for Ovation distributed control system components.

1X00781H01L

Power Supply ModuleEmerson Ovation

DIN-Rail Power Supply Module

Emerson Ovation DIN-rail power supply module, 24 VDC 10A / 240W output, wide input 85-264 VAC or 90-375 VDC, supporting N+1 redundancy in the Ovation distributed control system.

2SY5012-0LB15

Power Supply ModuleSIPOS

Power Supply Board

SIPOS 2SY5012-0LB15 power supply board for SIPOS 5 Flash electric actuators.

2UBA002322R0010

Power Supply Board

ABB power supply board, part 2UBA002322R0010.

2VAA008283R101

MPS IV BP03 Power Supply Base

ABB Symphony MPS IV BP03 base for two SPS03-5V and two SPS03-15V power supply modules.

30731808-002

Regulator Card

Honeywell TDC 2000 slide-in regulator card that converts 24 V DC backplane power to stable 5 V DC and 12 V DC chassis supplies, with fault detection, removable fuses and calibration test sockets.

350-3-CPCI-AC-6U-500

Power Supply ModuleCompressor Controls Corporation

PSMU CompactPCI Power Supply Module

Compressor Controls Corporation (CCC) PSMU CompactPCI AC power supply module, 6U, 500 series.

35AE92 GJR5137200R0005

35AE92 Power Supply Board

ABB Procontic 35AE92 power supply board, order code GJR5137200R0005.

3HAB2207-1

Robot Power Supply Module (DSQC 236D)

ABB DSQC 236D power supply module (3HAB2207-1) for S4/S4C/S4C+ robot controllers; supplies regulated DC for internal modules and I/O.

3HAB2207-1-3

Robot Power Supply Module (DSQC 236D)

ABB DSQC 236D power supply module (3HAB2207-1) for S4/S4C/S4C+ robot controllers; supplies regulated DC for internal modules and I/O.

3HAC020697-020

DeviceNet Power Supply Set

ABB robot DeviceNet power supply set, part of the 3HAC020697 power supply family for IRC5 robot controllers. Supplies power to the DeviceNet fieldbus network.

3HAC020697-021

DeviceNet Power Supply Set

ABB robot DeviceNet power supply set, part of the 3HAC020697 power supply family for IRC5 robot controllers. Supplies power to the DeviceNet fieldbus network.

3HAC020697-022

DeviceNet Power Supply Set

ABB robot DeviceNet power supply set for IRC5 robot controllers, supplying power to the DeviceNet fieldbus network.

3HAC14178-1

DSQC609 Power Supply Module

ABB DSQC609 power supply module (220-240 VAC in, 24 VDC out, 120 W) for IRC5 robot controllers.

3KXG758003U0400

Power Supply Module

ABB power supply module, part number 3KXG758003U0400.

421822-1A

Power Supply ModuleValmet

Power Supply Module

Valmet Automation PUD-10B power supply board (M851362), part 421822-1A/-1B, +5 V and +/-24 V outputs, for Damatic process-automation/marine control systems.

45C321

Power Supply ModuleReliance Electric

AutoMate Power Supply Module

Reliance Electric AutoMate / DCS 5000 power supply module (B/M 802820), 120/240 VAC 50/60 Hz, with over-voltage and over-current protection and keyswitch operation.

45C922

Power Supply ModuleReliance Electric

Shark XL Power Supply Module

Reliance Electric Shark XL power supply module, jumper-selectable 115/230 VAC input, <600 mA, 47-63 Hz.

4DP7APXPR

TDC 2000/3000 DCS Power Regulator Board

Honeywell 4DP7APXPR-series power regulator paddle board for the TDC 2000/TDC 3000 distributed control system.

4DP7APXPR211

TDC 2000/3000 DCS Power Regulator Board

Honeywell 4DP7APXPR-series power regulator paddle board for the TDC 2000/TDC 3000 distributed control system.

51153998-100

Cabinet Power Entry Module

Honeywell 51153998-100 is a cabinet power entry module that manages and distributes electrical power within industrial control cabinets, serving as the primary power interface for Honeywell systems such as TDC 3000 and Experion. Rack- or cabinet-mounted. Revision G.

51195066-100

5-Slot Chassis Power Supply Module

Honeywell 51195066-100 is a 5-slot chassis power supply module for distributed control systems such as Experion and TDC 3000. Input 100-240 VAC 47-63 Hz, output 24 VDC regulated, hot-swappable, dimensions 127 x 95 x 60 mm.

51195091-700

Power Supply Module

Recognized manufacturer reference available for industrial supply enquiry.

51308598-176

Power Backup Module

Honeywell 51308598-176 power backup module for TDC3000 / Experion PKS process control systems, providing backup power to controllers and I/O modules during power interruptions. Operating temperature 0 to +60 C.

51404174-125

Power System Assembly

Honeywell power system assembly in the 51404174 MU/MC-PSRX04 family used to supply DC power to Honeywell DCS card files; the -275 sibling is a 20A redundant power supply.