Parts catalogue

991 Thrust Transmitter

Bently Nevada 991 Series compact, loop-powered thrust transmitter. Works with 3300 NSv proximity probe, full-scale range 2.5 mm, 4 to 20 mA output. Mountable via bulkhead screws or DIN rail clips.

991-25-50-03-05

991 Loop-Powered Thrust Transmitter

Bently Nevada 991 Series loop-powered thrust transmitter. Measurement range +/-0.6 mm (+/-25 mils), 5.0 m system length, accuracy +/-1.5% of full scale, CSA Div 2/ATEX/ABS approvals, 3300 NSv proximity probe.

991-25-70-01

991 Thrust Transmitter

Bently Nevada 991 Series thrust transmitter providing a 4-20 mA signal proportional to axial displacement.

991-25-70-01-01

Thrust Position Monitor

Bently Nevada

991 Series Two-Wire Thrust Transmitter

Bently Nevada 991 Series two-wire, loop-powered thrust transmitter. Interfaces with 3300 NSv proximity probe, conditions input into engineering units proportional to shaft axial position, 4 to 20 mA output, +12 to +35 Vdc.

Contact for wholesale

991-25-70-01-CN

991 Probe Vibration Transmitter

Bently Nevada 991 Series probe vibration/thrust transmitter. DIN-rail mount, 4-20 mA output, axial vibration measurement, +12 to +35 VDC, linear range 0.25 to 1.65 mm for Prox Out. Made in U.S.A.

991-25-70-02-00

991 Loop-Powered Thrust Transmitter

Bently Nevada 991 Series loop-powered thrust transmitter. Measurement range +/-0.6 mm (+/-25 mils), 7.0 m system length, accuracy +/-1.5% of full scale, IP67, API 670 compliant, CSA Div 2/ATEX/ABS approvals.

991-25-70-02-01

991 Probe Vibration Transmitter

Bently Nevada 991 Series probe vibration/thrust transmitter. Full-scale 25-0-25 mils, 7.0 m system length, bulkhead-screw mount, CSA Division 2. Made in U.S.A.

991-25-70-03-05

991 Thrust Transmitter

Bently Nevada 991 Series probe vibration/thrust transmitter. Full-scale 25-0-25 mils, 7.0 m system length, DIN clips and screws mount, CSA Division 2/ATEX. Made in U.S.A.

991-25-XX-01

991 Thrust Transmitter

Bently Nevada 991 Series thrust transmitter providing a 4-20 mA signal proportional to axial displacement.

991-25-XX-01-CN

991 Thrust Transmitter

Bently Nevada 991 Series thrust transmitter measuring axial displacement with a 4 to 20 mA proportional output. Integrated Proximitor sensor, compatible with 3300 NSv proximity probe.

A0643TX

AccelerometerEmerson

CSI Triaxial Accelerometer

The Emerson CSI A0643TX is a triaxial accelerometer with an integral magnet for use with AMS 2140 and CSI 2130 vibration analyzers. Sensitivity 100 mV/g on all three axes, range +/-50 g, frequency range 0.5-10,000 Hz (CH/A), excitation 18-28 VDC, stainless steel housing, ATEX/IECEx/CSA certified.

A0760GP

AccelerometerEmerson EPRO

Industrial Accelerometer

Industrial piezoelectric accelerometer with 100 mV/g sensitivity and a ±50 g measurement range. Frequency range 0.50 to 10,000 Hz, mounted resonant frequency 25 kHz, operating temperature -54 to +121 C.

A3120/022-000

Dual-Channel Bearing Vibration Monitor

Dual-channel vibration monitor for small, low-channel applications such as turbines, compressors, pumps and fans. Measures absolute bearing vibration from seismic sensors with software-configurable measurement range and alarms. 24 VDC nominal supply, max 6 W.

A6110

Vibration Monitor ModuleEmerson

Epro Vibration Module

Emerson Epro A6110 vibration monitoring module.

A6110

Shaft Relative Vibration Monitor

Single-slot shaft relative vibration monitor for the AMS 6500 Machinery Health Monitor system. Provides two transducer inputs for high-reliability monitoring of critical rotating machinery, supporting API 670 machinery protection on steam, gas, compressor and hydro turbomachinery.

A6120

Epro Seismic Vibration Monitor

Emerson Epro A6120 seismic vibration monitor module.

A6120

Vibration Monitor ModuleEmerson EPRO

Velocity Vibration Monitoring Module

Two-input electrodynamic (electro-mechanical) vibration monitoring module with differential input, -5 to +15 VDC input voltage range. Used to monitor vibration levels of rotating machinery and structures.

A6125

Epro Piezoelectric Vibration Monitor

Emerson Epro A6125 piezoelectric vibration monitor module.

A6125

Case Seismic Vibration Monitor

Casing (seismic) vibration monitor for critical rotating machinery, measuring case vibration via accelerometers. Integrates with CSI 6500 monitors to form an API 670-compliant machinery protection system. 13-32 VDC input, dual-channel, hot-swappable.

A6140

Epro Vibration Monitor

Emerson Epro A6140 vibration monitor module.

A6140

Dual-Channel Shaft Absolute Vibration Monitor

Dual-channel shaft absolute vibration monitor module for the AMS 6500 Machinery Health Monitor system. Accepts eddy current, seismic or piezoelectric sensor inputs, API 670 compliant, hot-swappable. Suitable for steam, gas, compressor and hydro turbines.

A6210

Position Monitor ModuleEmerson

Epro Rod Position Monitor

Emerson Epro A6210 rod position monitor module.

A6210

Eccentricity MonitorEmerson EPRO

Thrust and Differential Expansion Module

Thrust and differential expansion monitoring module for machinery protection systems. Provides differential expansion and thrust position monitoring with configurable I/O.

A6220

Machinery Health Monitor

Machinery health monitor from Emerson.

A6312

Speed Monitor ModuleEmerson

Dual Channel Speed Key Monitor

Emerson A6312 dual-channel speed key monitor module.

A6312

Speed Monitor ModuleEmerson EPRO

Dual-Channel Speed/Key Monitor Module

Dual-channel speed and key (phase reference) monitor module within the A6000 machine monitoring system. Accuracy up to 0.01 RPM, response time under 1 ms, 24 VDC supply.

A6312-06

Speed Monitor ModuleEmerson

Speed Monitor Module

Emerson DeltaV/monitoring A6312-06 module.

A6312-08

Speed Monitor ModuleEmerson

Speed Monitor Module

Emerson A6312-08 monitoring module.

A6312/06

Speed Monitor ModuleEmerson EPRO

Speed and Key Monitor

Dual-channel speed and key monitor module measuring speed, phase, zero speed and rotation direction of rotating machinery. Eddy current or differential sensor inputs, 0 to 20,000 Hz input frequency range, integrates with the AMS 6500 system.

A6312/08

Speed Monitor ModuleEmerson EPRO

Speed Monitor Module

Speed monitor module within the A6000/AMS 6500 machine monitoring family. Provides speed monitoring for industrial rotating machinery with Modbus RTU and Ethernet communication.

A6370

Monitoring Module

Emerson A6370 monitoring module.

A6370D

Overspeed Detection ModuleEmerson EPRO

Overspeed Protection Monitor

Dual-channel overspeed protection monitor for critical machinery. Independent hardware and software per channel, 0 to 20 kHz frequency range, compatible with eddy current, Hall-element and magnetic (VR) sensors. Communication via USB, RS-485 and Profibus DP.

A6410

Expansion Monitoring Module

Emerson A6410 expansion monitoring module.

A6410

Eccentricity MonitorEmerson EPRO

Dual-Channel Valve and Case Expansion Monitor

Dual-channel valve position and case expansion monitor, part of the AMS 6500 series. 3U single-slot plug-in module, API 670 compliant, hot-swappable, compatible with PlantWeb, Ovation and DeltaV systems.

A6410-CSI-6500

Ovation CSI 6500 Monitor

Emerson Ovation CSI 6500 monitor (A6410).

A6560

Monitoring Module

Emerson A6560 monitoring module.

A6910

Monitoring Module

Emerson ePro A6910 monitoring module.

A6EC10000087

Machinery Protection ModuleGE Multilin

Multilin UR Monitoring Module

GE Multilin UR-series 6EH monitoring module for Universal Relay protection systems.

A9360/08-09-00

Vibration Monitor ModuleEmerson EPRO

Vibration and Position Monitoring Module

Field-configurable vibration and position monitoring module. Vibration ranges 50/125/250 um, position 2.0 mm, 4-20 mA output, 5 Hz to 1 kHz frequency response, -40 to +85 C, IP65, 24 VDC supply.

A9530V3

AMS Wireless Vibration Monitor

The Emerson A9530V3 is a wireless vibration monitor with a triaxial accelerometer and temperature sensor, integrating into WirelessHART networks. Provides overall vibration, PeakVue measurements and temperature readings; long-life lithium battery power.

AC115-M12D

AccelerometerEmerson

CSI Triaxial Accelerometer

The Emerson CSI AC115-M12D is a triaxial IEPE accelerometer capturing vibration along X, Y and Z axes. Sensitivity 100 mV/g, frequency response 1 Hz-6.5 kHz, dynamic range +/-50 g peak, 316L stainless steel case, 4-pin M12 connector.

AI40EX-M

Signal ConditionerTurck

Isolating Switching Amplifier

Turck AI40EX-M interface module from the M series of intrinsically safe signal isolators.

AIH41EX-M

Signal ConditionerTurck

Isolating Switching Amplifier

Turck AIH41EX-M interface module from the M series of intrinsically safe signal isolators.

AM3100T2-Z2

AccelerometerBently Nevada

General Purpose Accelerometer

Bently Nevada general purpose accelerometer. Sensitivity 100 mV/g +/-5%, top (straight) exit, 80g peak acceleration range, 1/4-28 mounting thread, Zone 2 rated. Made in U.S.A.

AMM52

Analog Signal Conditioning Module

Yokogawa AMM52 analog signal conditioning module; 4 input and 4 output channels, supports voltage (0-10V, +/-10V) and current (4-20mA) signals with dual redundancy support.

AMM52-S2

Analog Signal Conditioning Module

Yokogawa AMM52-S2 analog signal conditioning module for CENTUM control systems.

AMM52-S3

S3 Analog Signal Conditioning Module

Yokogawa AMM52-S3 analog signal conditioning module for CENTUM control systems.

AMM52-S4

S4 Analog Signal Conditioning Module

Yokogawa AMM52-S4 analog signal conditioning module for CENTUM control systems.