Parts catalogue
Browse by category, product type and truck or manufacturer brand. No public pricing; each reference routes to wholesale enquiry.
Sensor, Level
Sensor, Level. Kaysan-coded commercial truck part with public OEM comparison references.
Starter Motor
Starter Motor. Kaysan-coded commercial truck part with public OEM comparison references.
Starter Motor
Starter Motor. Kaysan-coded commercial truck part with public OEM comparison references.
Starter Ring Gear
Starter Ring Gear. Kaysan-coded commercial truck part with public OEM comparison references.
Starter Motor
Starter Motor. Kaysan-coded commercial truck part with public OEM comparison references.
Starter Motor
Starter Motor. Kaysan-coded commercial truck part with public OEM comparison references.
Ignition Switch
Ignition Switch. Kaysan-coded commercial truck part with public OEM comparison references.
Control Switch Panel
Control Switch Panel. Kaysan-coded commercial truck part with public OEM comparison references.
Contact Switch
Contact Switch. Kaysan-coded commercial truck part with public OEM comparison references.
Switch, Battery
Switch, Battery. Kaysan-coded commercial truck part with public OEM comparison references.
Solenoid Switch, Starter Motor
Solenoid Switch, Starter Motor. Kaysan-coded commercial truck part with public OEM comparison references.
Tail Lamp, Left
Tail Lamp, Left. Kaysan-coded commercial truck part with public OEM comparison references.
Tail lamp
Tail lamp. Kaysan-coded commercial truck part with public OEM comparison references.
Tail lamp, right, with reverse alarm
Tail lamp, right, with reverse alarm. Kaysan-coded commercial truck part with public OEM comparison references.
Tail lamp, left
Tail lamp, left. Kaysan-coded commercial truck part with public OEM comparison references.
Auxiliary Contact Block
Allen-Bradley 100-FA40 four-pole auxiliary contact block for Bulletin 100 contactors.
Coil Suppressor Varistor Module
Allen-Bradley 100-FSV136 varistor coil suppressor module for 100-C series contactors, compatible with AC coils (56-136V AC) or 100-C09 to C43 contactors with conventional DC coils (78-180V DC). Screw terminal, surge-arrester suppressor type.
Output Cable Assembly
ABB cable assembly (Cable Assy ST OUTP), part number 10001584.
Probe Extension Cable
Bently Nevada 1001-40 proximity probe extension cable.
Power Module
Yokogawa 1001-MA-Y1 power module.
Proximity Probe Extension Cable
Metrix 7200-series extension cable used with proximity probes and transducers to measure shaft vibration and axial position. Cable length 9 meters, IP67 environmental rating, frequency response 0 to 10 kHz, insulation resistance at least 100 Mohm at 500 VDC, operating temperature -40C to +125C.
Combi 308 Junction Box
Wiska Combi 308 junction box, 85x85x51 mm. Polypropylene with TPE sealing gasket, IP66/IP67, 400V, glow-wire test 960 deg C, temperature -30 to 100 deg C, 4 mm2 rated cross section.
Combi 607 Junction Box
Wiska Combi 607 junction box, 110x110x66 mm. Polypropylene with TPE gasket, IP66/IP67, 690V, glow-wire test 960 deg C, temperature range -30 to 100 deg C, 4 internal openings.
Cable Gland, Brass Nickel-Plated, PG Thread
Wiska MSKV cable gland, brass nickel-plated, PG thread. Polyamide clamping cage, TPV gasket, IP68/IP69, temperature -40 to 100 deg C.
Cable Gland, Brass Nickel-Plated, NPT Thread
Wiska NMSKV cable gland (model MSKV), brass nickel-plated, NPT thread. Polyamide clamping cage, EPDM gasket, IP68/IP69, temperature -40 to 100 deg C.
Trip Unit
General Electric trip unit, reference 10096227G5.
Proximity Probe Extension Cable
Bently Nevada 102045-040-00 proximity probe extension cable for the 3300 XL system.
Proximity Sensor Cable
Bently Nevada 102045-040-01 armored proximity sensor cable for the 3300XL 8mm vibration monitoring system. Stainless steel housing, 3-socket transducer plug, 4 m length, impedance 50-60 ohm.
Proximity Probe Extension Cable
Bently Nevada 102045-080-00-05 extension cable for the 3300 XL Proximity Transducer System. 8 m length, 4-pin miniature coaxial connector, tinned copper conductor, braided EMI shield, operating range -40 to +85 C.
IRR-3 Relay Box
Multi-purpose relay unit rated for 24VDC or 220V AC visible and/or audible signal units. 24VDC operation, local mute function for SPA Public Address System, wall mounting, suitable for noisy areas. Screw terminals, max switching current 8A, flame-retardant plastic housing, IP-66, 3x PG-11 cable inlet.
IRR-4 Output Relay Box
The IRR-4 activates an extra signal device, such as a rotary or stroboscopic light, in noisy areas. Connect a potential-free normally-open signal to the control input, a power supply to the correct input, and the signal device to the output; when the control input shorts, the output engages the power. ABS housing.
Probe Extension Cable
Bently Nevada 103-00-06-10-02-00 proximity probe extension cable.
FSC Power Supply Module
Honeywell FSC (Fail Safe Controller) power supply module, part number 10303/1/1.
FSC Power Supply Board
Honeywell FSC (Fail Safe Controller) power supply board, part number 10307-1.
FSC Earth Leakage Detector Module
Honeywell 10310/2/1 earth leakage detector module, continuously monitors earth leakage currents for early detection of insulation failures and ground faults. UL/CSA certified. OEM part number 51309241-175.
FieldMonitor 1701/10 24 V DC Power Supply
Bently Nevada 1034549-10 (1701/10) FieldMonitor power supply providing logic and transducer voltages for FieldMonitor modules. Fits 1701/05 or 1701/06 terminal bases. Input +18 to +36 V DC, 30 A peak inrush, integrated over-voltage protection.
QUINT4 DC/DC Converter
Phoenix Contact QUINT4-PS/24DC/24DC/10/SC primary-switched DC/DC converter, DIN rail mounting, SFB technology, input 24 V DC, output 24 V DC / 10 A, typ. efficiency 93.3%.
ENT Power Supply Module
The Hirschmann ENT 10515-R is a power supply module for Hirschmann network/industrial equipment.
Probe Extension Cable
Bently Nevada 106-05-30-05-02-00 proximity probe extension cable.
Probe Extension Cable
Bently Nevada 106-05-30-10-02-05 proximity probe extension cable.
Probe Extension Cable
Bently Nevada 106-05-30-P0-02-00 proximity probe extension cable.
Interconnect Cable
Bently Nevada 106765 interconnect cable for machinery monitoring systems.
Interconnect Cable
Bently Nevada 106765-01 shielded multi-conductor interconnect cable for industrial vibration monitoring systems. Oxygen-free copper conductor, 1 m length (custom lengths available), 75 ohm impedance.
Interconnect Cable
Bently Nevada 106765-04 interconnect cable, 4 meter length, for industrial monitoring systems.
Interconnect Cable
Bently Nevada 106765-07 interconnect cable, 7 meter length, made in USA.
Interconnect Cable
Bently Nevada 106765-09 coaxial shielded interconnect cable for 3300 XL and 3500 Machinery Protection Systems, 9 meter length, 50 ohm impedance.
Interconnect Cable
Bently Nevada 106765-10 interconnect cable, 10 meter length, for machinery health monitoring systems.
Interconnect Cable
Bently Nevada 106765-16 interconnect cable for the 3300 XL system, 16 ft (4.87 m) length, miniature coaxial connector.