Parts catalogue

100 Base-T Cable

Honeywell 51305562-400 is a shielded 100 Base-T cable with ferrite bead, 1 m length, 24 AWG conductor, RJ45 connectors. Operating range -40C to +85C.

51305722-001

Dual Fiber Optic Cable

Honeywell 51305722-001 is a 1 m dual fiber optic jumper cable for Honeywell DCS systems with a 100-micron fiber core for EMI-resistant industrial communication.

51305739-100

C300 Controller Interconnect Cable

Honeywell 51305739-100 is an industrial cable connecting Honeywell C300 controller modules to other automation equipment. Weight approximately 1030 g.

51305742-100

Shielded Twisted Pair Cable

Honeywell 51305742-100 is a shielded twisted pair industrial cable. Copper conductors, PVC jacket, rated up to 600 V and 20 A.

Contact for wholesale

51305786-510

100BTX Ethernet Cable, 10m

Honeywell 51305786-510 is a 10 m 100BASE-TX Ethernet cable for Honeywell control networks.

51305829-400

Industrial Power Module

Honeywell 51305829-400 is an industrial power module for automation platforms, delivering stable DC output with integrated power factor correction (0.95). IP20 enclosure, passive cooling.

51305830-100

AC Power Cable Splitter

Honeywell 51305830-100 is an AC power cable splitter for industrial automation systems. 3 spade male plug (13A, 250V) to 2 female plugs, 13A per plug.

51305830-400

AC Power Cable

Honeywell 51305830-400 is an AC power cable for Honeywell TDC3000 and Experion PKS hardware, supplying AC power to system modules and interface assemblies.

51305845-100

Touchscreen Power Cable

Honeywell 51305845-100 is a 6-foot touchscreen power cable for Honeywell Measurex systems, delivering power to industrial touchscreen interfaces.

51305980-124

Redundant C300 Controller Cable

Honeywell 51305980-124 is a shielded multi-core industrial signal cable for Honeywell DCS platforms (C300 redundancy). 24 VDC, EMI/RFI shielding, factory-molded locking connectors.

51305980-184

100 Base-T Ethernet Cable

Honeywell 51305980-184 is a 100 Base-T Ethernet cable for Honeywell Measurex systems. 84 inches, RJ45, yellow boots, IP20 rated.

51305980-284

100 Base-T Ethernet Cable

Honeywell 51305980-284 is a fault-tolerant 100 Base-T Ethernet cable for Honeywell control systems. 84 inches, RJ45 with green boot, 100 Mbps, 100 ohm impedance.

51305980-836

Redundant C300 Controller Cable

Honeywell 51305980-836 is a redundant C300 controller cable for the Honeywell Experion LX system, linking two C300 controllers and their IOTA modules. 100BASE-T Ethernet, 36 inches, orange boots.

51306199-299

CAT5e Cable, 330ft

Honeywell 51306199-299 is a 330 ft CAT5e communication cable for Honeywell control networks.

51306356-100

Shielded Communication Cable

Honeywell 51306356-100 is a shielded communication cable for industrial environments, with EMI/RFI protection and an abrasion- and chemical-resistant jacket. Operating range -40C to +80C.

51307038-100

Power Control Module

Honeywell 51307038-100 (BU-PWCNTA-CN) is a power control / supply module for Honeywell Experion PKS and TDC systems, providing power regulation and distribution for controllers and I/O modules. 24 VDC nominal input, rack-mounted.

51307039-100

Circuit BreakerHoneywell

Breaker Box Module Assembly

Honeywell 51307039-100 is a breaker box module assembly for Honeywell industrial control systems. 24 VDC, CE/TUV/UL508/CSA approvals.

51308020-200

Monitor AC Power Cable

Honeywell 51308020-200 is a monitor AC power cable for Honeywell control system displays.

51308047-100

Universal Station Touchscreen Interface Cable

Honeywell 51308047-100 is a touchscreen interface cable for Universal Station operator consoles in TDC 3000 systems. Shielded industrial communication cable with factory-terminated connectors for stable signal transmission.

51308051-200

Enclosure DC Power Cable

Honeywell 51308051-200 is a DC power cable for industrial control panels and distributed control systems, providing consistent voltage transmission for control equipment in automation enclosures.

51308058-100

Keyboard Interface Cable

Honeywell 51308058-100 is a keyboard interface cable for operator workstations in TDC3000 distributed control systems, rated 24V DC with EMI/RFI shielding and proprietary Honeywell connectors.

51308092-200

Power CableHoneywell

TDC 3000X AC Power Cord

Honeywell 51308092-200 is an industrial AC power cable for XC3000 and TDC 3000X control systems. Rated 250V AC, 10A, 2 metres long, providing stable power delivery to Honeywell modules.

51308093-300

Power CableHoneywell

TDC 3000 AC Power Entry Panel Cable

Honeywell 51308093-300 is an AC power entry panel cable for TDC 3000 control systems. Rated 250V AC, 10A, 89 cm (35 in) long, for secure power connectivity between system components and external power sources.

51308094-300

Power CableHoneywell

TDC 3000 AC Power Cord

Honeywell 51308094-300 is an AC power cord for TDC 3000 industrial control systems. Rated 250V AC, 15A, 2 metres long, for reliable power delivery to control components.

51308097-200

Universal Station Touch Control Cable

Honeywell 51308097-200 is a touch control cable for Universal Station operator consoles in TDC 3000 systems. Shielded, low-noise industrial communication cable with factory-terminated connectors.

51308103-003

Printer Cable

Honeywell 51308103-003 printer/communication cable, 3 metre length, for TDC3000-series control systems.

51308111-002

LCN Connection Cable

Honeywell 51308111-002 is a multi-core shielded connection cable for DCS racks, I/O modules, operator panels and sensors on the Honeywell Local Control Network. 12-core tin-plated AWG24 copper, PTFE insulation, M12 8-pin connectors, IP67, 2 m (customisable).

51308112-003

LCN Coaxial Cable Set, 3 m

Honeywell 51308112-003 is a 3 metre LCN coaxial cable set for Local Control Network communication in TDC3000 systems. RG11 coax with ferrite filters for EMI suppression.

51308112-005

LCN Coaxial Cable Set, 5 m

Honeywell 51308112-005 is a 5 metre LCN coaxial cable set for Honeywell Local Control Network systems. RG11 with ferrites, 75 ohm impedance, 300V AC rating, -40 to +85 C.

51308112-008

LCN Coaxial Cable Set, 8 m

Honeywell 51308112-008 is an 8 metre LCN coaxial cable set for the Local Control Network in Experion and TDC 3000 systems. RG-11 coaxial with ferrite beads for high-frequency noise suppression. Supersedes 51109181-008.

51308112-015

LCN A/B Coaxial Cable Set, 15 m

Honeywell 51308112-015 is a 15 metre LCN A/B coaxial cable set for Local Control Network communication in TDC3000 systems. RG11 coax with ferrite filters. Direct upgrade from legacy 51109181-015.

51308112-020

LCN Coaxial Cable Set, 20 m

Honeywell 51308112-020 LCN coaxial cable set, 20 metre length, for Local Control Network communication in TDC3000 systems.

51308112-100

PLC Communication Cable, 200 m

Honeywell 51308112-100 is a 200 metre PLC communication cable for industrial automation, providing connectivity between programmable logic controllers and field/I/O modules with EMI-resistant shielding.

51308112-300

LCN Coaxial Cable Set

Honeywell 51308112 series Local Control Network (LCN) coaxial cable set for data transmission between LCN nodes in TDC 3000 and Experion PKS distributed control systems.

51309204-175

UCN Power Adapter FTA

Honeywell MC-TLPA02 UCN power adapter Field Termination Assembly supplying power to LLMux / SDI / SI FTAs in TDC 3000 distributed control systems.

51400712-100

5-Slot File Power Supply

Honeywell TDC 3000 power supply for a 5-slot card file (CRP).

51400712-200

5-Slot File Power Supply

Honeywell TDC 3000 power supply module (51400712 family) for a 5-slot card file.

51401135-350

Power Supply Module

Honeywell power supply module for industrial automation and control systems. Input 100-240V AC 50/60 Hz; output 24V DC / 12V DC; maximum output 350W; efficiency over 90%; operating temperature -40C to 70C.

51401140-250

Power System Module

Honeywell TDC 3000 power system module (51401140 redundant AC power system family) supplying regulated DC for the DCS cabinet.

51401140-400

AC-Only Power System

Honeywell AC-only power system for industrial control platforms, integrating with Honeywell DCS and automation architectures. Input 240V AC; operating temperature -10C to +55C; storage -40C to +70C.

51401140-650

Power System Module

Honeywell TDC 3000 power system module (51401140 redundant AC power system family) supplying regulated DC for the DCS cabinet.

51401469-100

Power Supply

Honeywell power supply for distributed control systems.

51401497-100

Dual Node Power Supply

Honeywell dual node power supply for the LCN (Local Control Network) chassis, delivering independent redundant power to two control nodes. Two independent power nodes within one unit; supports internal or external clock for SOE functionality. Includes over-voltage, over-current and short-circuit protection.

51403896-100

Terminal BlockHoneywell

Horizontal DC Power Bus Bar

Honeywell 51403896-100 horizontal DC power bus bar for distributing DC power across components in a control system. Typically 24V DC, up to 20A.

51404109-175

Power Module (MC-PRHM01)

Honeywell 51404109-175 (MC-PRHM01) power module for Honeywell distributed control systems.

51404174-275

Redundant Power Supply Module

Honeywell 51404174-275 redundant power supply module. Input 85-264 VAC, output 24 VDC at 16 A per output, 90% efficiency, NEMA 4X / IP66 rated.

51450991-001

Switching Power Supply

Honeywell 51450991-001 (900-01-0301) switching power supply. Input 90-264 VAC, 47-63 Hz; outputs 5 V DC at 6 A and 24 V DC at 2 A; 58 W continuous.

51452525-001

Switching Power Supply

Honeywell 51452525-001 compact switching power supply for industrial control environments. Input 90-264 VAC, 47-63 Hz, 0.7 A max; 29 W continuous dual DC output. Used in Honeywell Experion and TDC platforms.