Parts catalogue
Browse by category, product type and truck or manufacturer brand. No public pricing; each reference routes to wholesale enquiry.
Wireless Sensor Interface Module
Bently Nevada 185310-01 is a wireless sensor interface module (wSIM) and repeater that extends ISA100.11a (IEC 62734) wireless networks at 2.4 GHz for vibration sensors, with optional IP65 protection.
Wireless Repeater
Bently Nevada 185410-01 is a wireless repeater for ISA100.11a (IEC 62734) mesh networks at 2.4 GHz, +20 dBm transmit power, up to 200 m line-of-sight coverage, for industrial vibration and temperature monitoring.
Wireless Repeater
Bently Nevada 185450-01 is a wireless repeater module for the Essential Insight.mesh (EI.mesh) system, extending ISA100.11a (IEC 62734) wireless sensor networks at 2.4 GHz with up to +20 dBm transmit power.
Wireless Repeater Module
Bently Nevada 185450-CN is a wireless repeater module for the Essential Insight.mesh system, extending ISA100.11a (IEC 62734) mesh networks at 2.4 GHz, 24 VDC supply, ≤2.5 W power consumption.
SDH Optical Transceiver Module
Alcatel-Lucent STM-16 (2.67G) optical transceiver/SFP module (TRXSFPL, 1550nm DDM 80km) for the 1660SM SDH transmission platform.
ETL600 R4 Universal Digital Power Line Carrier
ABB 1KHW001356R0004 is an ETL600 R4 universal digital power line carrier for secure communication over power lines in critical infrastructure, supporting both legacy analog and digital operation.
Universal Digital Power Line Carrier
ABB 1KHW002296R0001 is a universal digital power line carrier supporting analog and software-configurable digital operation: up to three 4 kHz analog channels and/or one digital channel, up to 32 kHz bandwidth, data rate up to 320 kbps.
ETL600 R4 Universal Digital Power Line Carrier Module
ABB 1KHW028503R0025 is an ETL600 R4 universal digital power line carrier module that transmits signals over existing power lines, reducing additional cabling in industrial automation systems. Origin Switzerland.
VLS-15TF Horn Loudspeaker, 15W
Robust and versatile horn speaker suitable for outdoor installation in harsh environments. Prepared for loop in/loop out connection. Includes 1x M20 gland and 1x blind plug. Dimensions 253W x 152H x 309D mm, ABS grey housing, stainless steel grade 304 bracket, rated power 15W rms.
VLS-30TF Horn Loudspeaker, 30W
General purpose 30W horn loudspeaker with transformer for 100V line. Suitable for industrial sites and tough environments. ABS housing and stainless-steel brackets for good corrosion resistance. Six power tappings: 5W, 10W, 15W, 20W, 25W, 30W. Robust horn speaker suitable for outdoor installation in harsh environments.
DT-800M Desktop Analogue Telephone
The DT-800M analog desktop telephone is made for the ACM and ICS systems. Well suited for use onboard ships with a solid marine-grade construction including a strong magnet handset holder. Mounting desk or wall, RJ11 connection, operating voltage 20 to 60 VDC, operating current 20 to 100 mA, nominal ringing voltage 75 VAC.
DT-800M Desktop Analog Telephone
The DT-800M analog desktop telephone is made for the ACM and ICS systems. Well suited for shipboard use with a solid marine-grade construction including a strong magnet handset holder. Easy to use with a full keyboard (including R/Flash key) and large buttons, plus an LED status indicator.
IFS-USB Data Cable
Phoenix Contact IFS-USB data cable for communication between industrial PCs and Phoenix Contact devices with a 12-pos. IFS data port, such as QUINT UPS or TRIO UPS.
DSP-15EEX MNT Ex Horn Speaker with SST Bracket
Explosion-protected horn speaker, 25W, with 1x plastic M20 cable gland (11-14mm) and tappings 1.5W/2.5W/5W/6.5W/15W/25W. Ex db eb mb IIB+H2 T4 Gb / Ex tb IIIC T105 C Db. Anti-static PA black housing, bracket mounting, e-chamber push terminals, weight 2.2 kg with transformer, IP-66/67, temperature -50 to 60 C, rated/max power 25 W/30 W.
SPA-M6S-D PA Panel
SPA-M6S-D PA panel. Size 144 x 144 x 82 mm, weight w/ microphone 0.6 kg, black anodized aluminium, flush or wall mounting (with back box). Output signal 0.775 Vrms / 0 dB, pluggable screw terminals for 2.5 mm2 cable, 4 x PG-16 cable glands. Discontinued and replaced by 2340110036.
SPA-M1-V2 PA Panel
Provides All Call Messages in a SPA-V2 public address and general alarm single system. For installation in consoles or walls indoors. Local mute function breaks audio to loudspeakers where proximity causes feedback; must be combined with the relay box. Microphones ordered separately.
SPA-M6S-D Dual PA Panel, 6 Zones, Flush Mount
Vingtor-Stentofon panel that gives messages in one to six zones in a SPA-V2 public address and general alarm dual system. For installation in consoles or on-wall indoors. Local mute function breaks audio to loudspeakers where proximity causes feedback; must be combined with the relay box. Microphones ordered separately.
Industrial Ethernet Hub
Phoenix Contact FL HUB 16TX ZF industrial Ethernet hub, 16 ports.
Industrial Ethernet Switch
Phoenix Contact FL SWITCH SF 16TX industrial Ethernet switch, 16 ports.
Industrial Ethernet Switch
FL SWITCH SFN 5TX unmanaged industrial Ethernet switch, 5 x RJ45 ports, 10/100 Mbps, DIN-rail mount. Phoenix Contact article 2891152.
Hub
ABB 2N2338 hub component, supplied as an industrial automation spare part.
HSB-03 Wall Telephone
HSB-03 wall-mounted telephone. IP-66 rated.
SPA-240-V2 PA Main Unit, 19" Rack, 240W
PA main unit for the SPA series public address and general alarm system. The SPA-V2 is an improved second-generation system. The basic functionality module supports a single non-redundant system, delivered as a 19" rack containing the main board and at least one amplifier.
SPA-M1S-V2 PA Panel
Provides All Call Messages in a SPA-V2 public address and general alarm single system. For installation in consoles or walls indoors. Local mute function breaks audio to loudspeakers where proximity to the PA panel causes feedback. Available from hardware version 4.0; must be combined with the relay box.
SPA-M1-V2 PA Panel
Provides All Call Messages in a SPA-V2 public address and general alarm single system. For installation in consoles or walls indoors. A local mute function breaks audio to loudspeakers where proximity to the PA panel causes feedback; must be combined with the relay box. Delivered with gooseneck microphone.
SPA-SWITCH-V2 Monitor with 6x Volume Line Selector
6-line input selector with monitoring for six amplifiers and entertainment input for six sources. On/off for entertainment, volume adjustment of line output signal with amplifier, 24VDC supply. All input/output terminals on the back, 19" rack mounted 2 HU, including rack expansion.
VM15-RD Dual Volume Control
Dual volume control, 4-wire override, 2x 15W, for use in public address and general alarm systems. Flush mounting (optional wall mounting with back box). 4 x PG-16 cable gland, input from 100V amplifier, 100V output, 24V DC / 20mA override supply, operating temperature -15 C to +55 C.
VPA-120 Power Amplifier
The VPA power amplifier is specially designed for marine use. Installed in a 19" rack, occupying 3 HU with the addition of a 1 HU ventilation grid. Protected against overload and short circuits. A temperature-controlled fan ensures high reliability at high output levels and low ventilation noise at lower output levels. 230 VAC operation.
VPA-240 Power Amplifier 240W/100V
The Vingtor-Stentofon VPA power amplifier is designed for use on ships; robust and able to handle mobile environments as well as stationary temperature-controlled rooms. Installed in a 19" rack, occupying 3 HU with a 1 HU ventilation grid. Protected against overload and short circuits. 240 W power output, 100V line.
ETB-100 Master Unit
ETB-100 master unit. Aluminium/black finish, flush mounting with 4 x 4 mm screws, pluggable screw terminals for cable max 2.5 mm2, 6 x PG-16 cable glands, IP-22, dimensions 240W x 144H x 130D mm (with glands).
MB-30G Gooseneck Microphone
Electret gooseneck microphone with 5-pin DIN plug for use in Public Address and Talk-Back systems. Speaking distance approximately 2 cm. IP-32, operating temperature -15 C to +55 C.
ETB-5 Master Station with MB-30G Gooseneck Microphone
Master station bundle (replaces SPA-M1-V2-PA Panel 3005010150). ETB-5 master station with 5-line selection, All Call facility, monitor speaker/microphone, connector for gooseneck or handheld microphone, dimmable memory light, line buttons with memory light, buzzer for incoming calls, and step volume control. Supplied with MB-30G gooseneck microphone.
STB-1 Talk-Back Substation
Talk-Back substation designed for use in cabins, messrooms, etc. Delivered for wall mounting with call button, privacy talk-button. Screw terminal connections, black front, IP-22, weight 0.35 kg, operating temperature -15 to +55 C.
STB-2 Calling Box, Bulkhead Mounting
Waterproof call box with call button, forming a loud-speaking Talk-Back substation together with a horn loudspeaker (VML-1520). ABS grey, screw terminals, IP-66, dimensions 110W x 80H x 63D mm, weight 0.3 kg, operating temperature -25 to +55 C.
STB-6GN Substation with Gooseneck Microphone
Parallel station with gooseneck microphone for indoor use. Parallel microphone/loudspeaker for ETB and CTB operator panels. Flush or bulkhead mounting, wall mounting with back box. IP-22, PG-16 cable entry, 3 W loudspeaker, operating temperature -15 to +55 C.
SAFE-10PTF Wall Loudspeaker
Wall loudspeaker with fuse for accommodation areas, with 70/100V line transformer and wall mounting. Waterproof ABS plastic. IP-44, temperature range -40 to 90 C, rated/max power 10 W / 15 W, effective frequency range 160-20000 Hz.
VML-1520 Horn Loudspeaker, 15W
General purpose 15 Watt 20 ohm horn loudspeaker for use on deck areas, engine rooms, etc. To be used with ACM or talk-back stations. Dimensions 250W x 145H x 270D mm, temperature -40 to +55 C, relative humidity 0-95%. ABS grey housing, stainless steel grade 304 mounting bracket, 2.5 m cable.
VSP-211M-L Batteryless Telephone Main Station
The VSP-211M-L Main Station is part of the 20-Way Batteryless Telephone System, designed for seamless communication onboard vessels even during power outages. 20-extension system, 2-position group selector switch. 24V operation.
VSP-213M-L Main Station, 20-Way Batteryless Telephone System
The VSP-213M-L Main Station is part of the 20-Way Batteryless Telephone System, tailored for ships needing consistent secondary communication. Flexible installation (flush, wall, or desk) and operation make it a solid choice for strategic communication across a vessel.
VMP-221 Complete Handset Console for VMP-430
Handset console for use with main station VMP-430. Flush mounting, disconnects the built-in loudspeaker in the VMP-430 when off-hook. Screw terminals, IP-44, dimensions 80W x 280H x 90D mm (with handset), weight 0.65 kg.
VHM-10-T Talk-Back Deck Substation with Handheld Microphone
Talk-back substation for open deck areas, wall mounting, with call button and IP-66 handheld microphone, prepared for external loudspeaker. Polycarbonate grey cabinet, dimensions 215 x 310 x 160 mm, IP-66, DC resistance 200 ohm, sensitivity 0.5 mV/dyne/sq.cm at 1 kHz, power capacity 0.2 W (0.5 W peak).
N-Tron 516TX 16-Port Ethernet Switch
General Electric 336A4940DNP516TX 16-port industrial Ethernet switch (N-Tron 516TX series) for gas turbine control and automation, Modbus/TCP. Integrates with GE Mark VIe systems.
Industrial Ethernet Switch
N-Tron industrial managed Ethernet switch, part number 336A4940DNP516TX.
516FX Ethernet Switch
General Electric 336A4940DNP517FX industrial Ethernet switch. Available for wholesale industrial supply enquiry.
TDC 3000 Hub Assembly
TDC 3000 hub assembly from Honeywell, part number 38500143-200 (also referenced with 38500148-300).
TDC 3000 LCN Hub Assembly
Honeywell TDC 3000 Local Control Network (LCN) hub assembly, part of the legacy TDC 3000 distributed control system. The 38500143 family is the LCN hub assembly with multiple dash variants.
TDC 3000 LCN Hub Assembly
Honeywell TDC 3000 Local Control Network (LCN) hub assembly for the legacy TDC 3000 distributed control system. The 200LCN variant denotes the LCN configuration of the 38500143 hub family.
TDC 3000 LCN Hub Assembly
Honeywell TDC 3000 Local Control Network (LCN) hub assembly, part of the legacy TDC 3000 distributed control system. -220 is a distinct dash variant of the 38500143 hub family.