Parts catalogue
Browse by category, product type and truck or manufacturer brand. No public pricing; each reference routes to wholesale enquiry.
Safety-Related Limit Monitor
The HIMA F6251 is a safety-related limit monitor for HIMax and HIMatrix platforms. Input 10-30 V DC, max 60 mA, limit setting range 0-5 V, 12-bit resolution, relay output max 3 A at 250 V AC, RS-485, IP65/IP67, SIL 3 (IEC 61508), PL e (ISO 13849).
Safety-Certified Central Processing Unit
The HIMA F8652X is a safety central module for applications up to SIL 3 and PL e. Two 32-bit microprocessors, 512 KB Flash-EPROM, 512 KB SRAM, two isolated RS485 serial interfaces, four-digit matrix display, Ethernet interface, and a safety-related watchdog (24 V, up to 500 mA, short-circuit proof).
Flame Analysis Unit
ABB FAU800 analyzes signals from flame detectors for industrial flame monitoring. Powered by single or redundant 24 VDC (21.6-31.2 V), two independent channels, Modbus or Profibus, compatible with 4-20 mA and 0-5 V sensor heads and ABB flame rods.
Uvisor Flame Scanner
ABB FAU810 Uvisor flame scanner / flame analysis unit for ABB automation systems.
Uvisor FAU810 Flame Scanner
ABB FAU810 Uvisor flame scanner, configuration C10-12010.
Uvisor FAU810 Flame Scanner
ABB FAU810 Uvisor flame scanner, configuration C87-11006.
Uvisor Dual-Channel Flame Scanner Assembly
ABB FAU810 Uvisor dual-channel flame scanner complete assembly.
Safety Manager Enhanced Quad Processor Pack
Honeywell Safety Manager FC-QPP-0002 Enhanced Performance Quad Processor Pack; the central controller module that reads IO inputs, executes the Controller File logic and drives outputs, supporting applications up to SIL3. Backwards compatible with QPP-0001.
Universal Safe I/O Module
Honeywell FSC FC-RUSIO-3224 Universal Safe Input/Output module.
Safety Digital I/O Module
The Honeywell FC-TDIO52 is a safety digital I/O module for Honeywell Safety Manager SC systems, providing digital input/output processing for safety-critical applications. Dimensions 368 x 120 x 50 mm.
Safety Manager System Module
The Honeywell FC-TPSU-2430 is a Safety Manager system module providing DC-to-DC power conversion and system support within Honeywell's Safety Manager architecture. DIN rail compatible.
Universal Safe Digital Output Module
The Honeywell FC-TSDO-04UNI is a 4-channel universal DC output module for Honeywell Safety Manager systems, rated up to 50 Vdc with 2 A continuous current per channel. DIN rail mountable.
FC-USI General Safety Interface Module V1.0
Honeywell FC-USI general safety interface module, hardware version V1.0, for the Safety Manager system.
FC-USI General Safety Interface Module V1.3
Honeywell FC-USI general safety interface module, hardware version V1.3, for the Safety Manager system.
FC-USI Safety Manager System Module
Honeywell FC-USI Safety Manager system module (USI = Universal Safety Interface).
FC-USI Safety Manager System Module V1.0
Honeywell FC-USI Safety Manager system module, hardware version V1.0.
FC-USI DCS Module
Honeywell FC-USI DCS module for the Safety Manager system.
RAEGuard 2 PID Fixed Gas Monitor
Honeywell (RAE Systems) RAEGuard 2 PID fixed gas monitor, model FGM-2001, for VOC detection.
Fixed Gas Detector
The Honeywell FGM-6300S is a fixed gas detector for hazardous industrial settings, continuously monitoring for flammable and toxic gases such as methane, carbon monoxide and hydrogen sulfide. SIL compliant.
FlameSpec IR3 Flame Simulator Kit
FGD FlameSpec IR3 flame simulator test kit used to perform detector testing during commissioning and periodic system testing. Lightweight ergonomic design with alignment markers for fast detector performance verification; suitable for hazardous areas.
FlameSpec-IR3-HD Triple IR Flame Detector
FGD FlameSpec-IR3-HD triple IR (IR3) flame detector providing ultra-fast response and reliable detection of hydrocarbon fires (visible and non-visible). Operates in all weather and light conditions with high immunity to false alarms.
Multi-Point Toxic Gas Detection System
Riken Keiki FPM-80A tape-type multi-point toxic gas detection system with powerful sampling pumps (up to 120 m), hot-swappable power supplies/pumps/PCs, touch-panel operation, and long-life cassette tape.
Safety Manager System Module
The Honeywell FS-TPSU-2430 is a safety system module operating at 24V DC (24-30 VDC input), 1 A output, supporting Modbus TCP/IP, OPC, and Ethernet/IP, with enhanced diagnostics and fault detection.
FS20X Multi-Spectrum Fire and Flame Detector
The Honeywell FS20X-211-21-2 is a dual IR/UV multi-spectrum fire and flame detector with copper-free aluminium enclosure and two 3/4 inch NPT entries. FM and cFM approved for Class I, Division 1.
Dual IR/UV Flame Detector
The Honeywell FS20X-211-23-3 is a dual IR/UV multi-spectrum flame detector with copper-free aluminum enclosure and two M25 entries. FM, cFM, ATEX and IECEx approved for Class I, Zone 1.
Dual IR/UV Flame Detector
The Honeywell FS20X-212-23-3 is a dual IR/UV multi-spectrum flame detector with copper-free aluminium enclosure and two M25 entries. FM, cFM, ATEX and IECEx approved for Class I, Zone 1, with optional factory-installed HART module.
Dual IR/UV Flame Detector
The Honeywell FS20X-212-24-3 is a dual IR/UV multi-spectrum flame detector with stainless steel enclosure and two M25 entries. FM, cFM, ATEX and IECEx approved for Class I, Zone 1, with optional factory-installed HART module. Detection range greater than 60 m to a 0.1 m2 heptane fire.
QuadBand IR3+ Flame Detector
The Honeywell Fire Sentry FS24X-211-21-1 is a multi-spectrum triple-IR (IR3+) flame detector with copper-free aluminum enclosure and two 3/4 inch NPT entries. FM, cFM, IECEx and ATEX approved with optional registered HART module.
QuadBand IR3+ Flame Detector
The Honeywell Fire Sentry FS24X-211-22-1 is a multi-spectrum triple-IR QuadBand IR3+ flame detector with 316 stainless steel enclosure and two 3/4 inch NPT entries. FM, cFM, IECEx and ATEX approved.
QuadBand IR3+ Flame Detector
The Honeywell Fire Sentry FS24X-211-23-1 is a QuadBand IR3+ flame detector with copper-free aluminum enclosure and two M25 entries. FM, cFM, IECEx and ATEX approved with optional registered HART module.
QuadBand IR3+ Flame Detector
The Honeywell FS24X-211-24-1 is a QuadBand IR3+ multi-spectrum triple-IR flame detector with 316 stainless steel enclosure and two M25 entries. FM, cFM, IECEx and ATEX approved.
QuadBand IR3+ Flame Detector
The Honeywell FS24X-212-22-1 is a QuadBand IR3+ flame detector with 316 stainless steel enclosure and two 3/4 inch NPT entries. FM, cFM, IECEx and ATEX approved with optional registered HART module.
QuadBand IR3+ Flame Detector
The Honeywell FS24X-911-22-1 is a QuadBand IR3+ multi-spectrum triple-IR flame detector with 316 stainless steel enclosure and two 3/4 inch NPT entries. FM, cFM, IECEx and ATEX approved.
Flame Detector
The Honeywell Fire Sentry FS24X-911-23-5 is a QuadBand IR3+ multi-spectrum triple-IR flame detector with copper-free aluminum enclosure and two M25 entries, FM approved for high background IR applications.
Quad Band Triple IR Flame Detector
The Honeywell FS24X-911-24-1 is a QuadBand IR3+ multi-spectrum triple-IR flame detector with 316 stainless steel enclosure (IP66) and two M25 entries. FM, cFM, IECEx and ATEX approved, operating -60 to +85C with 90-degree field of view.
QuadBand IR3+ Flame Detector
The Honeywell Fire Sentry FS24X is a multi-spectrum triple-IR (IR/IR/Visible) QuadBand IR3+ flame detector. This variant has a copper-free aluminum enclosure with two M25 entries. FM, cFM, IECEx and ATEX approved; optional registered HART module factory installed.
QuadBand IR3+ Flame Detector
The Honeywell Fire Sentry FS24X is a multi-spectrum QuadBand IR3+ flame detector. FM, cFM, IECEx and ATEX approved; optional registered HART module factory installed.
QuadBand IR3+ Flame Detector (HART)
The Honeywell FS24X-912-24-1 is a QuadBand IR3+ flame detector with 316 stainless steel enclosure and two M25 entries. FM, cFM, IECEx and ATEX approved with optional registered HART module.
QuadBand IR3+ Flame Detector
The Honeywell FS24X-912-24-5 is a QuadBand IR3+ flame detector with 316 stainless steel enclosure and two M25 entries (dash-5 FM/cFM), IECEx and ATEX approved with optional registered HART module.
FS24X Plus Triple Infrared Flame Detector (Aluminium, M25, Marine Mount)
The Honeywell FS24X Plus FS24XP-AMGXM is a next-generation 3IR flame detector for hydrocarbon and hydrogen fires, in aluminium enclosure with M25 entry, marine mount and sunshade. FM3260, EN54-10 and SIL2 (EN61508) certified with HART over 4-20 mA output.
FS24X Plus Triple Infrared Flame Detector (Aluminium, M25)
The Honeywell FS24X Plus FS24XP-AMGXX is a next-generation 3IR flame detector for hydrocarbon and hydrogen fires, in aluminium enclosure with M25 entry, mount and sunshade. FM3260, EN54-10 and SIL2 certified with HART over 4-20 mA output.
FS24X Plus Triple Infrared Flame Detector (Aluminium, NPT, Marine Mount)
The Honeywell FS24X Plus FS24XP-ANGXM is a next-generation 3IR flame detector for hydrocarbon and hydrogen fires, in aluminium enclosure with 3/4 inch NPT entry, marine mount and sunshade. FM3260, EN54-10 and SIL2 certified with HART output.
FS24X Plus Triple Infrared Flame Detector (Aluminium, NPT)
The Honeywell FS24X Plus FS24XP-ANGXX is a next-generation 3IR flame detector for hydrocarbon and hydrogen fires, in aluminium enclosure with 3/4 inch NPT entry, mount and sunshade. FM3260, EN54-10 and SIL2 certified with HART output.
FS24X Plus Triple Infrared Flame Detector (Stainless Steel, M25, Marine Mount)
The Honeywell FS24X Plus FS24XP-SMGXM is a next-generation 3IR flame detector for hydrocarbon and hydrogen fires, in stainless steel enclosure with M25 entry, marine mount and sunshade. FM3260, EN54-10 and SIL2 certified with HART output.
FS24X Plus Triple Infrared Flame Detector (Stainless Steel, M25)
The Honeywell FS24X Plus FS24XP-SMGXX is a 3IR flame detector in stainless steel enclosure with M25 entry, mount and sunshade, featuring WideBand IR technology, selectable sensitivity and 90-degree cone of vision.
FS24X Plus Triple Infrared Flame Detector (Stainless Steel, NPT, Marine Mount)
The Honeywell FS24X Plus FS24XP-SNGXM is a next-generation 3IR flame detector for hydrocarbon and hydrogen fires, in stainless steel enclosure with 3/4 inch NPT entry, marine mount and sunshade. FM3260, EN54-10 and SIL2 certified with HART output.
FS24X Plus Triple Infrared Flame Detector (Stainless Steel, NPT)
The Honeywell FS24X Plus FS24XP-SNGXX is a next-generation 3IR flame detector for hydrocarbon and hydrogen fires, in stainless steel enclosure with 3/4 inch NPT entry, mount and sunshade. FM3260, EN54-10 and SIL2 certified with HART output.
Flame Detector Test Lamp
Honeywell Morley FSL100-TL flame detector test lamp for testing the FSL100 range of flame detectors. Rechargeable hand-held IR and UV radiation source, detection range approx. 4 m. Supplied with universal charger.