Wiska 510/D/2x24-Z14 explosion-proof on-off switch, 2-pole, 16A, brass, IP66. ATEX Ex eb IIC / Ex tb IIIC, zone 1, 690V, temperature -55 to 130 deg C, 6 mm2 terminals.

Contact for wholesale

51011

Process AnalyzerYokogawa

Digital Lux Meter

Yokogawa 51011 digital lux meter.

Contact for wholesale

510124

DCS ModuleABB

DCS Spare Part

Recognized manufacturer reference available for industrial supply enquiry.

Contact for wholesale

5102-MCM4-DFCM4

Communication ModuleProSoft

MCM4 DFCM4 Communication Module

ProSoft 5102-MCM4-DFCM4 Modbus and DF1 communication module.

Contact for wholesale

51105244-100

Power SupplyHoneywell

Power Supply Module

Recognized manufacturer reference available for industrial supply enquiry.

Contact for wholesale

51107403-100

Control BoardHoneywell

LCN I/O Address Board

LCN I/O Address Board for Honeywell TDC 3000 distributed control systems. Provides addressing and communication between the Local Control Network (LCN) and connected I/O subsystems. Approx. 192 x 145 x 27 mm PCB, 5 VDC logic supply.

Contact for wholesale

51107595-100

Power SupplyHoneywell

TDC 3000 Peripheral Power Supply Module

Peripheral power supply module for Honeywell TDC 3000 distributed control systems, powering the History Module SCSI and related peripherals. Typically 120/240 V AC input with regulated DC output; rack-mounted in TDC 3000 cabinet.

Contact for wholesale

51108088-100

Control BoardHoneywell

Data Hiway Interface (DHI) Paddle Board

Data Hiway Interface (DHI) paddle board for Honeywell TDC 2000 and TDC 3000 systems. Interfaces between Hiways A and B via BNC connectors using Hiway Tees.

Contact for wholesale

51108088-200

I/O ModuleHoneywell

I/O Data Hiway Interface Board

Honeywell 51108088-series I/O Data Hiway Interface (DHI) paddle board providing the link between the Data Hiway (TDC 2000) and the Local Control Network (TDC 3000) DCS.

Contact for wholesale

51108607-200

Chassis / RackHoneywell

Chassis Module

Recognized manufacturer reference available for industrial supply enquiry.

Contact for wholesale

51108607-902

Chassis / RackHoneywell

Chassis Module

Recognized manufacturer reference available for industrial supply enquiry.

Contact for wholesale

51109394-100

I/O ModuleHoneywell

Universal I/O Board (Analog/Digital)

Universal analog/digital I/O board for Honeywell TDC3000 and Experion PKS distributed control systems. Multi-channel, configurable for analog and digital signals, hot-swap capable, with onboard fault detection. Approx. 25.9 x 18.5 x 3 cm; operating temperature -10 C to +60 C.

Contact for wholesale

51109485-100

Network CableHoneywell

UCN Carrier Band Tap, 8-Port

Honeywell TDC 3000 Universal Control Network (UCN) 8-port carrier-band coaxial tap used to connect controller drops to the UCN trunk cable.

Contact for wholesale

51109516-100

CableHoneywell

Power Cable

Power cable, 3-conductor copper with PVC insulation, 600 V / 20 A rating, 16 AWG. UL/CSA certified.

Contact for wholesale

51109516-200

CableHoneywell

Shielded I/O Link Cable

Shielded I/O Link cable assembly for Honeywell TDC 3000 and UCN systems, connecting Field Termination Assemblies (FTAs) to I/O Processors (IOPs). 2 m length, EMI/RFI shielded, machined brass corrosion-resistant connectors, Teflon-coated high-temperature insulation.

Contact for wholesale

51109516-300

CableHoneywell

Interface Cable

Interface cable, 3-pin with ground, shielded twisted pair with polyurethane jacket for noise immunity. Used to connect Honeywell Experion / Experion PKS DCS to field devices.

Contact for wholesale

51109620-200

RelayHoneywell

Safety Relay Module

Safety relay module that interrupts power to equipment on a safety hazard. 24 V DC input, ~400 mA output, single channel, SIL3 certified, operating temperature -40 C to +70 C.

Contact for wholesale

51109684-100

Power SupplyHoneywell

HPM Power Supply Module

High Performance Module (HPM) power supply for Honeywell Universal Control Network (UCN) process control systems. Input 85-264 V AC (47-63 Hz) or 120-370 V DC; output 24 V DC +/-1%, 240 W, 10 A continuous (13 A peak); efficiency >=90%; overload, overvoltage, short-circuit and overtemperature protection.

Contact for wholesale

51109693-100

Network CableHoneywell

UCN Tap, 4-Port

Honeywell TDC 3000 Universal Control Network (UCN) 4-port coaxial tap (family related to 51201395-100) used to connect controller drops to the UCN trunk.

Contact for wholesale

51109693-100B

Terminal BlockHoneywell

Ground Tap

Honeywell 51109693-100B ground tap for industrial control system wiring.

Contact for wholesale

51109806-002

Cable AssemblyHoneywell

LCN Coaxial Cable Set, 2M

Honeywell TDC 3000 LCN (Local Control Network) coaxial cable set, 2 metres, RG59 without ferrites.

Contact for wholesale

51109818-100

Power SupplyHoneywell

Power Supply, 120/240 VAC

Honeywell TDC 3000 120/240 VAC power supply / regulator module for distributed control system racks.

Contact for wholesale

51109882-100

Optical Link ModuleHoneywell

LCNE Fiber Optic Transmitter

Honeywell LCNE (Local Control Network Extender) fiber optic transmitter module (Rev C) used for extending the LCN over fiber.

Contact for wholesale

51109909-100

Cable AssemblyHoneywell

Keyboard Alarm Cable

Honeywell TDC 3000 keyboard alarm cable assembly.

Contact for wholesale

51109919-100

Control BoardHoneywell

Printed Wiring Board, PCSR

Honeywell TDC 3000 printed wiring board (PWB), PCSR circuit board assembly.

Contact for wholesale

51113

Ball BearingSKF

Thrust Ball Bearing

SKF 51113 single-direction thrust ball bearing.

Contact for wholesale

51120673-101

Analog Input ModuleHoneywell

Analog Input Card Module

Honeywell 51120673-101 is a CE-certified analog input card module for signal acquisition in industrial control systems, converting analog voltage or current field signals into digital format for controller input. Operating voltage 24 VDC. Dimensions 15.5 x 3 x 7.8 cm.

Contact for wholesale

51120841-101

Relay Output ModuleHoneywell

SPDT Control Relay Module

Honeywell 51120841-101 is a single SPDT control relay module from the MR Series, used in industrial control, building automation and safety systems. Contact configuration SPDT, contact rating 10A at 250V AC, control/coil voltage 24V DC, response time <=10 ms.

Contact for wholesale

51121227-101

Control BoardHoneywell

TDC 3000 Control Board Assembly

Honeywell 51121227-101 is a control board assembly used in the TDC 3000 Distributed Control System (DCS), providing signal processing and communication functions between system modules. Operating temperature 0 to +60 C.

Contact for wholesale

51153818-101

Temperature ControllerHoneywell

Industrial Temperature Controller

Honeywell 51153818-101 is an industrial temperature controller for precision temperature control in industrial processes. Input 120/240 VAC, thermocouple or RTD input, relay or SSR output, On/Off and PID control modes, temperature range -200 C to 1800 C, 4-digit LED display, 96 x 96 mm panel format.

Contact for wholesale

51153818-102

ConnectorHoneywell

Jumper Kit

Honeywell 51153818-102 jumper kit for Honeywell process control platforms, used to configure internal signal routing and I/O within controller modules. Rack- or panel-mounted.

Contact for wholesale

51153818-103

ConnectorHoneywell

Jumper Kit

Honeywell 51153818-103 jumper kit for configuring internal signal routing within TDC 3000 and Universal Station modules. Includes pre-terminated jumpers and module-specific wiring elements.

Contact for wholesale

51153818-104

ConnectorHoneywell

Jumper Kit

Honeywell 51153818-104 jumper kit for distributed control systems (DCS), used in controller modules to manage I/O routing and internal circuit configuration via jumpers.

Contact for wholesale

51153818-201

ConnectorHoneywell

Jumper Kit for C300 Controller

Honeywell 51153818-201 gray jumper kit (jumpers 1-10) for Honeywell C300 controllers, used to set communication protocol, I/O configuration and power options within industrial control systems.

Contact for wholesale

PreviousPage 217 / 703Next