Parts catalogue

easYgen-2000 Series Genset Controller

Genset controller from the easYgen-2000 series for power management. Supports up to 16 gensets in island mode or parallel with utility; 12/24V DC, 11-language interface.

8440-1923

easYgen-3200 Generator Controller

Woodward easYgen-3200 generator/genset control unit, order number 8440-1923.

8440-1925

easYgen-3200-5 Generator Controller

Woodward easYgen-3200-5 generator/genset control unit, order number 8440-1925.

8440-1934

easYgen-3500-5 Generator Controller

Woodward easYgen-3500-5 generator/genset control unit, order number 8440-1934.

Contact for wholesale

8440-1945

Genset Controller

Recognized manufacturer reference available for industrial supply enquiry.

8440-1946

ControllerWoodward

LS-5 Circuit Breaker Controller

Recognized manufacturer reference available for industrial supply enquiry.

8440-1978

Governor ControlWoodward

DSLC-2 Digital Synchronizer and Load Control

DSLC-2 (Digital Synchronizer and Load Control) module for advanced generator control. Microprocessor-based synchronization and load sharing; 1A CT inputs, 12/24V DC, 4 communication ports including Ethernet, IP20.

8440-2028

Digital I/O ModuleWoodward

Digital I/O Expansion Module

Digital I/O expansion module to extend control capabilities in industrial automation. 16 digital inputs, 16 digital outputs, 24VDC, RS-485/Modbus RTU, hot-swappable.

8440-2050

easYgen-3000 Series Digital Speed Controller

Part of Woodward's easYgen-3000 series for controlling generators and turbines. Voltage setting range 50-650,000 VAC, current 1-32,000 A, 50/60 Hz, 16-bit resolution, 12/24 VDC.

8440-2050F

easYgen-3200-5 Controller

Woodward easYgen-3200-5 generator/genset control unit, order number 8440-2050F.

8440-2052

Operator TerminalWoodward

Operator Interface

Recognized manufacturer reference available for industrial supply enquiry.

8440-2082

easYgen-3200XT Genset Controller

High-performance paralleling generator set controller and output module for distributed power systems. Supports load-sharing across up to 32 generator sets; class 1.0 accuracy.

8440-2084

Genset Controller

Genset controller for engine-driven generators. Integrates speed, voltage, and load control; 24 VDC, 12 digital inputs, 8 relay outputs, 4 analog inputs, RS-232/RS-485/Modbus RTU.

8440-2088

easYgen-3500XT-P2 Controller

easYgen-3500XT-P2 controller for engine generator control and protection. Advanced point-to-point parallel functionality for starting, stopping, loading, and unloading generators with status monitoring.

8440-2150

ControllerWoodward

LS-5 V2 Circuit Breaker Controller

LS-5 V2 circuit breaker controller for generator and utility breaker supervision. Fast synchronization, secure mains decoupling, LogicsManager logic; 12/24 Vdc, CAN and RS-485.

8440-2165

Microprocessor-Based Synchronizer

Microprocessor-based synchronizer. Accuracy class 1, 12/24 Vdc supply, rated voltage 66/115 or 230/400 Vac, 40-70 Hz measuring frequency.

8440-2166

Control ModuleWoodward

SPM-D2 Series Synchronizer

Microprocessor-based synchronizer from the SPM-D2 series, compatible with Woodward and other speed controls and AVRs. Auxiliary voltage 9.5-32V DC, 100V AC primary, USB configuration.

8441-1138

RelayWoodward

Multi-Function Relay Module

Multi-function relay module combining multiple protective features. True RMS measurement, 230/400V AC, operating temperature -20 to 70C, PC parameterization.

8444-1002

TransducerWoodward

Measuring Transducer

Recognized manufacturer reference available for industrial supply enquiry.

8444-1091

RelayWoodward

MFR300 Multifunction Relay

Multifunction relay and measuring transducer for monitoring single- and three-phase power systems. Measures voltage, current, and power; 120 VAC/DC input, 12/24 VDC supply, CANopen and Modbus.

8444-1109

Power MeterWoodward

MFR300 Power Measurement and Monitoring Device

Multifunction relay and measuring transducer for monitoring single- and three-phase power systems. Measures voltage, current, and power; class 0.5 accuracy, 12/24 VDC, CANopen and Modbus.

8446-1019

Governor ControlWoodward

Digital Speed Governor

Digital speed governor for steam turbines, adjusting steam inlet volume to user-defined settings. Control range 0-100%, accuracy +/-0.1%, IP67, -40C to +85C.

8446-1048

Control PanelWoodward

RP-3000 Remote Control and Annunciation Panel

RP-3000 HMI remote control and annunciation panel for generator systems. Same look and feel as easYgen-3200/3500 controls; CAN bus, LCD with 11-button panel, emergency stop.

84508-99

High-Temperature Signal Cable

The Bently Nevada 84508-99 is a high-temperature signal cable for vibration monitoring systems. PTFE insulation, temperature range -40 C to +125 C, 99 ft length. Made in USA.

84510-33

Extension CableBently Nevada

Standard/Armored Extension Cable

Bently Nevada 84510 standard or armored 22 AWG 3-conductor extension cable with 3-socket plug, used to extend proximity transducer / monitoring signal wiring.

84510-50

22 AWG Extension Cable

The Bently Nevada 84510-50 is a 22 AWG extension cable for proximity transducers and vibration monitoring systems, available in standard or stainless steel armored variants. Length typically 50 ft (15.24 m). Made in USA.

8455-SW-CF-BUS

Communication ModuleGE Fanuc

PAC8000 Bus Interface Module

GE PAC8000 bus interface module, part 8455-SW-CF-BUS.

845A033-2

Gas AnalyzerABB

Gas Chromatograph Analyzer

ABB 845A033-2 gas chromatograph analyzer module.

84661-06

3300 XL Interconnect Cable

The Bently Nevada 84661-06 is an interconnect cable for the 3300 XL Proximity Probe System, providing a shielded connection between proximity probes and Proximitor sensors. Length 6 ft (1.8 m), factory-installed coaxial connectors.

84661-10

Interconnect Cable

The Bently Nevada 84661-10 is a shielded twisted-pair interconnect cable for proximity probes and 3500 Series monitoring systems. Length 5 m, M12 connectors, 12V DC rating.

84661-12

Velomitor Interconnect Cable

The Bently Nevada 84661-12 is a 22 AWG armored interconnect cable for Velomitor sensors. 2-conductor twisted shielded, 20 ft (6 m), operating -20 to +30 C, frequency response 0.5 to 1000 Hz.

84661-15

Velomitor Interconnect Cable

The Bently Nevada 84661-15 is a 22 AWG armored 2-conductor twisted shielded interconnect cable for industrial sensors and transmitters. Length 16 ft (4.8 m), operating -20 to +30 C, frequency response 0.5 to 1000 Hz.

84661-16

Velomitor Interconnect Cable

The Bently Nevada 84661-16 is a 2-conductor twisted shielded armored interconnect cable for Velomitor piezo-velocity sensors. 22 AWG, 16 ft (4.8 m), copper conductors with polyurethane insulation and moisture-resistant connector.

84661-17

Velomitor Interconnect Cable

The Bently Nevada 84661-17 is a shielded multi-core Velomitor interconnect cable. 7x0.2 mm stranded copper 22 AWG, 17 ft length, MIL-C-5015 connector, IP68 rated. Made in USA.

84661-20

Velomitor Interconnect Cable

The Bently Nevada 84661-20 is a twisted-pair shielded Velomitor interconnect cable for vibration monitoring systems. 22 AWG copper, 20 ft (6.1 m), 50 ohm impedance, operating -40 C to +85 C.

84661-23

Velomitor Interconnect Cable

The Bently Nevada 84661-23 is a Velomitor interconnect cable for connecting Velomitor velocity sensors to monitoring systems.

84661-25

Velomitor Interconnect Cable

The Bently Nevada 84661-25 is a 3-wire 22 AWG Velomitor interconnect cable. Length 25 ft (7.6 m), PVC insulation, 250 VAC / 30 VDC rating, operating -40 C to +85 C.

84661-30

Velomitor Armored Interconnect Cable

The Bently Nevada 84661-30 is a 30 ft armored twisted-pair interconnect cable for Velomitor piezo-velocity sensors. 22 AWG 2-conductor shielded, stainless steel armor, EPR insulation, operating -40 C to +85 C.

84661-33

Velomitor Armored Interconnect Cable

The Bently Nevada 84661-33 is a standard stainless-steel armored interconnect cable for Velomitor sensors and 3500 Series monitoring systems. 22 AWG shielded, 3 m, Teflon insulation, IP67, current rating up to 5 A. Made in USA.

84661-34

Velomitor Armored Interconnect Cable

The Bently Nevada 84661-34 is a stainless-steel armored Velomitor interconnect cable. 22 AWG shielded, 10 m length, moisture-resistant connector, temperature range -29 to 121 C.

84661-35

Velomitor Armoured Extension Cable

The Bently Nevada 84661-35 is a rugged armoured extension cable for Velomitor piezo-velocity sensors. 18 AWG high-conductivity copper, 35 ft (10.67 m), M12 10-pin connector, braided EMI shield. UL Listed, CE Certified.

84661-39

Velomitor Interconnect Cable

The Bently Nevada 84661-39 is a Velomitor interconnect cable for connecting velocity sensors to monitoring systems.

84661-40

Velomitor Interconnect Cable

The Bently Nevada 84661-40 is a Velomitor interconnect cable for sensor-to-monitor connections in vibration monitoring systems. Length 40 ft (12.2 m), factory-terminated connectors.

84661-46

Velomitor Interconnect Cable

The Bently Nevada 84661-46 is a Velomitor interconnect cable for connecting velocity sensors to monitoring systems.

84661-50

Velomitor Interconnect Cable

The Bently Nevada 84661-50 is a factory-assembled shielded twisted-pair interconnect cable for Velomitor piezoelectric velocity sensors. Length 50 ft (15.24 m), molded connectors, temperature range -40 C to +105 C.

84661-60

Velomitor Interconnect Cable

The Bently Nevada 84661-60 is a Velomitor-compatible interconnect cable for connecting Velomitor piezo-velocity sensors to monitoring modules. 18 AWG, 60 ft (18.3 m), M12 10-pin connector, PVC insulation, RoHS compliant.

84661-67

Velomitor Interconnect Cable

The Bently Nevada 84661-67 is an interconnect cable for industrial monitoring systems including the 3500 series. 67 ft length, moisture-resistant industrial-grade connectors, output bias voltage 12 +/-1 VDC. Made in USA.

84661-75

Velomitor Interconnect Cable

The Bently Nevada 84661-75 is a Velomitor interconnect cable connecting Velomitor piezo-velocity sensors to monitoring systems. 2-conductor 22 AWG twisted shielded, 75 ft (22.86 m), 300V max rating, operating -40 C to +85 C.