Parts catalogue

2-Wire Transmitter Input Multiplexer Module

Yokogawa AMM42T 2-wire transmitter input multiplexer module; input 4-20 mA DC, transmitter power supply 23.5-24.5 V DC, input resistance 250 Ohm.

AMM52

Analog Signal Conditioning Module

Yokogawa AMM52 analog signal conditioning module; 4 input and 4 output channels, supports voltage (0-10V, +/-10V) and current (4-20mA) signals with dual redundancy support.

AMM52-S2

Analog Signal Conditioning Module

Yokogawa AMM52-S2 analog signal conditioning module for CENTUM control systems.

AMM52-S3

S3 Analog Signal Conditioning Module

Yokogawa AMM52-S3 analog signal conditioning module for CENTUM control systems.

Contact for wholesale

AMM52-S4

S4 Analog Signal Conditioning Module

Yokogawa AMM52-S4 analog signal conditioning module for CENTUM control systems.

AMM52T

Analog Output ModuleYokogawa

Current Output Multiplexer Module

Yokogawa AMM52T current output multiplexer module; multiplexes 16 analog current signals onto a single output channel, max 20mA per channel, with electrical isolation.

AMN11

Nest for Analog I/O Modules

Yokogawa AMN11 nest (rack) for analog I/O modules in CENTUM CS and CENTUM VP control systems; 16-slot modular platform, 24V DC, operating 0-55 C.

AMN11-FCS

Nest for Analog I/O Modules

Yokogawa AMN11-FCS nest (rack) for analog I/O modules in CENTUM CS and CENTUM VP control systems.

AMN11-S1

Nest for Analog I/O Module

Yokogawa AMN11-S1 nest (rack) for analog I/O modules; 16-slot modular platform, 24V DC, operating 0-55 C.

AMN12TS2

RTD Input ModuleYokogawa

S2 RTD Input Multiplexer Module

Yokogawa AMN12T S2 RTD input multiplexer module; multiplexes 12 RTD sensor inputs into a single PLC channel for temperature measurement.

AMN21

Nest for I/O Modules

Yokogawa AMN21 nest (rack) unit for I/O modules in CENTUM control systems.

AMN31

Nest for Terminal I/O Modules

Yokogawa AMN31 nest (rack) for terminal I/O modules in CENTUM CS 3000 and CENTUM VP systems; supports up to 31 terminal I/O modules, 24 VDC, NEMA 4X / IP66 rated.

AMN31-S1

Nest for Terminal I/O Modules Base Assembly

Yokogawa AMN31-S1 base assembly nest for terminal I/O modules in CENTUM control systems.

AMN32

Nest for Connector I/O Modules

Yokogawa AMN32 nest for connector I/O modules; connects up to 32 I/O modules to a single controller, 5.0 V DC supplied from Node Interface Unit.

AMN32T

Connector I/O Module Nest

Yokogawa AMN32T connector I/O module nest for modular data acquisition and control in CENTUM systems.

AMN33

Communication ModuleYokogawa

Communication Module Base Rack

Yokogawa AMN33 base rack unit for communication modules in CENTUM CS 3000 and CS 1000 systems; supports voltage, current and RTD inputs.

AMN34

Analog Input Module

Yokogawa AMN34 analog input module for CENTUM CS 3000 and CS 1000 systems; voltage/current/RTD inputs, +/-10V to +/-100V range, 16-bit resolution, isolated channels.

AMN52-S1

Nest for I/O Modules

Yokogawa AMN52-S1 nest (rack) unit for I/O modules in CENTUM control systems.

AMS-EZ-1000

Vibration TransmitterEmerson

Eddy Current Converter

Emerson AMS EZ 1000 universal eddy current converter for turbomachinery vibration/displacement monitoring; supports 5/8/16 mm proximity sensors, 0-20 kHz, USB field calibration, API 670 compliant.

AMS6500ATG

Machinery Protection ModuleEmerson

Online Protection System

The Emerson AMS 6500 ATG is a machinery protection and predictive system for critical rotating machinery (turbines, compressors, pumps). Up to 44 analog channels, 24-bit ADC, embedded PeakVue diagnostics, OPC UA / Modbus TCP/RTU interfaces.

AMT16M

2-Wire Transmitter Input Module

Yokogawa AMT16M 2-wire transmitter input module for CENTUM VP and ProSafe-RS; 16 analog input channels, 4-20 mA DC, HART protocol, 16-bit resolution.

AMT16M-S1

2-Wire Transmitter Input Module

Yokogawa AMT16M-S1 2-wire transmitter input module for CENTUM VP and ProSafe-RS control systems.

AMT16T

Terminal BlockYokogawa

Terminal Block for Transmitter Input Modules

Yokogawa AMT16T terminal block for transmitter input modules; provides secure field wiring for up to 16 two-wire transmitters, compatible with AAT145-SM0/SM3 modules.

AMX60

PA AmplifierAhuja

6-Channel PA Mixer Preamplifier

Ahuja AMX60 general-purpose 6-channel PA mixer preamplifier with balanced/unbalanced 1/4-inch inputs, per-channel gain, bass, treble, pan and level controls, clip LED and mono/stereo output.

AMXR7130

Drive Control BoardABB

RDCU-02C Drive Control Unit

RDCU-02C drive control unit (AMXR7130) for ABB ACS-series drives.

AN-X2-AB-DHRIO

Communication ModuleProSoft

AN-X2 EtherNet/IP to DH+/RIO Gateway

ProSoft AN-X2-AB-DHRIO Automation Network X-Change gateway interfacing EtherNet/IP controllers with legacy Remote I/O or DH+ devices. 1x RJ45 10/100 Mbps Ethernet, baud rates 57.6k/115.2k/230.4k, built-in web server.

AN25-XG-1-2

Pneumatic FittingSMC

Pneumatic Silencer Muffler

SMC pneumatic silencer/muffler with G1/2 thread.

AN450

Power SupplyBender

Power Supply Unit

Bender AN450 power supply unit; AC 230 V input, AC 20 V output, max 9 VA, used to supply Bender monitoring/alarm devices such as MK2430 alarm indicators.

ANB10D-223

ESB Bus Node Unit

Yokogawa ANB10D-223 ESB Bus Node Unit; communication interface within Yokogawa's Enhanced Serial Bus protocol, 24 VDC, operating -20 to +70 C.

ANB10D-410/S2

Interface ModuleYokogawa

ESB Bus Node Interface Unit

Yokogawa ANB10D-410/S2 ESB Bus Node Unit; interfaces analog and contact I/O signals with the Field Control Unit via ESB bus, 10 I/O connections, 24 VDC.

ANB10D-415/CU2N

Dual-Redundant ESB Bus Node Unit

Yokogawa ANB10D-415/CU2N dual-redundant ESB Bus Node Unit for CENTUM VP/CS 3000; provides communication and power distribution between Field Control Units and I/O modules, supplied with CU2N ESB bus connectors.

ANB10D-415/CU2T

Dual-Redundant ESB Bus Node Unit

Yokogawa ANB10D-415/CU2T dual-redundant ESB Bus Node Unit for CENTUM VP R5 or earlier; 100-120 V AC, supplied with CU2T connector unit with terminator for ESB bus.

ANB10D-420/CU2N/NDEL

ESB Bus Node Unit

Yokogawa ANB10D-420/CU2N/NDEL ESB Bus Node Unit (replacement for ANB10D/CU2N); 100-120 V AC / 24 V DC, 19-inch rack mount.

ANB10D-420/CU2T/NDEL

ESB Bus Node Unit

Yokogawa ANB10D-420/CU2T/NDEL ESB Bus Node Unit (replacement for ANB10D/CU2T); 100-120 V AC / 24 V DC, 19-inch rack mount.

ANB10D-421/CU2N/NDEL

ESB Bus Node Unit

Yokogawa ANB10D-421/CU2N/NDEL ESB Bus Node Unit; interfaces analog and contact I/O signals with the FCU via ESB bus, 100-120/220-240 V AC or 24 V DC.

ANB10D-425/CU2N

Dual-Redundant ESB Bus Node Unit

Yokogawa ANB10D-425/CU2N Node Unit for Dual-Redundant ESB Bus; interfaces analog and contact I/O signals with the FCU and supplies power to I/O modules, supplied with CU2N ESB bus connectors.

ANB10D-440/CU2T

ESB Bus Node Unit

Yokogawa ANB10D-440/CU2T rack-mounted ESB Bus Node Unit; interfaces analog and contact I/O signals with FCUs via ESB bus and supplies power to I/O modules in CENTUM VP/CS 3000 systems.

ANB10D-445/CU2N/NDEL

ESB Bus Node Unit

Yokogawa ANB10D-445/CU2N/NDEL ESB Bus Node Unit; dual-redundant 24 V DC power supply, supplied with CU2N ESB bus connectors and node expansion software license.

ANB10D-S1

ESB Bus Node Unit

Yokogawa ANB10D-S1 ESB Bus Node Unit for CENTUM control systems.

ANB11D-215/BU2B

Dual-Redundant ESB Bus Node Unit

Yokogawa ANB11D-215/BU2B redundant ESB bus node unit with optical communication; supports long-distance data transmission up to 5 km or 50 km with optical repeater, rack-mounted.

ANB11D-225/BU2B

Node Unit for Dual-Redundant ESB Bus

Yokogawa ANB11D-225/BU2B node unit for dual-redundant ESB bus with optical repeater (5 km); 220-240 V AC, supplied with BU2B connector unit with terminator.

ANB11D-615/BU2A

Optical Link ModuleYokogawa

Fiber Optic ESB Bus Node Unit

Yokogawa ANB11D-615/BU2A fiber optic ESB bus node module for Yokogawa DCS; extends and connects ESB networks, up to 125 Mbps, supports single-mode and multi-mode fiber, 24 VDC.

ANB11D-B15/BU2A

ESB Bus Node Unit

Yokogawa ANB11D-B15/BU2A node unit; collects and relays I/O signals from a remote location to a Field Control Unit, connects with optical ESB bus repeater master module (ANT401/ANT411), 100-120/220-240 V AC or 24 V DC.

AND50-562

Interface ModuleYokogawa

RIO Bus Interface Unit

Yokogawa AND50-562 interface unit for dual-redundant RIO bus systems; 19-inch rack mountable, CE/UL certified.

ANK31

Communication ModuleABB

ARCNET Interface Module

ANK31 ARCNET communication module for the ABB Advant Controller 31 series, 24 VDC supply, ARCNET protocol.

ANR10D-410

ER Bus Communication Unit

Yokogawa ANR10D-410 ER Bus Unit for CENTUM VP DCS; high-speed communication interface between the ER Bus network and field devices, 220-240 V AC.

ANR10D-413/NDEL

Interface ModuleYokogawa

ER Bus Node Interface Unit

Yokogawa ANR10D-413/NDEL node interface unit for ER Bus in CENTUM VP DCS; connects field devices to ER Bus for real-time communication and synchronization.

ANR10D-415

ER Bus Node Unit

Yokogawa ANR10D-415 ER Bus Node Unit for Yokogawa DCS platforms; communication interface enabling data exchange between ER Bus networks and connected field devices, with redundant communication support.