The Bently Nevada 3500/22 Rack Interface Module (RIM) is the interface between the 3500 monitoring system and compatible communication processors, capturing steady-state and transient waveform data. Supports up to 127 rack addresses; power 10.5 watts.

Contact for wholesale

164746-01

Analog Input ModuleBently Nevada

Seismic Direct Input Card

The Bently Nevada 164746-01 is a Seismic Direct Input Card for data acquisition and processing in seismic monitoring, supporting 2-wire current-mode sensors. 16-bit A/D resolution, inputs up to 24 kHz.

Contact for wholesale

164952-01-01

AccelerometerBently Nevada

Accelerometer Mounting Kit

The Bently Nevada 164952-01-01 Accelerometer Mounting Kit provides a protective enclosure for accelerometers used in turbine, compressor and rotating-machinery monitoring, shielding sensors from dust, moisture and mechanical stress. Includes housing, cover, O-ring, gasket, cable grip and screws; meets API 670 when installed.

Contact for wholesale

165811

Valve TerminalFesto

CPV14 Electrical Interface

Festo CPV14-GE-DI01-8 electrical interface for CPV valve terminals, order number 165811.

Contact for wholesale

165844-14

Proximity ProbeBently Nevada

3300 XL Proximity Probe

The Bently Nevada 165844-14 is a 3300 XL proximity probe for non-contact measurement of vibration and displacement, with extended linear range for critical machinery monitoring.

Contact for wholesale

16644992-001

Digital Output ModuleHoneywell

Digital Output Module (TDC 3000)

Honeywell 16644992-001 digital output module for TDC 3000 and Universal Station systems, providing discrete digital switching outputs with low-noise, interference-protected output channels for industrial automation.

Contact for wholesale

16644993-001

ControllerHoneywell

C300 Controller Module

Honeywell 16644993-001 C300 controller module for Experion PKS distributed control systems, delivering deterministic high-speed process control with Series 8 I/O, supports redundant controller configurations.

Contact for wholesale

16644994-001

Memory ModuleHoneywell

HC900 Controller Memory Backup Module

Honeywell 16644994-001 controller memory backup module preserving HC900 controller configuration and critical data during power loss or module replacement. Non-volatile backup memory, plug-in to HC900 controller base.

Contact for wholesale

16644995-001

Power SupplyHoneywell

HC900 Power Supply Module

Honeywell 16644995-001 power supply module for HC900 Hybrid Controllers, provides stable isolated power to the controller rack and I/O modules. Over-voltage, over-current and thermal protection.

Contact for wholesale

16699-01-02-02

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-01-02-02 is a velocity seismoprobe for industrial vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

Contact for wholesale

16699-03

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-03 velocity seismoprobe measures vibration velocity for machinery health monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

Contact for wholesale

16699-03-02-02

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-03-02-02 is a velocity seismoprobe for vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec; minimum operating frequency 600 RPM; angular range 90 deg +/-10 deg.

Contact for wholesale

16699-10-02-01

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-10-02-01 is a velocity seismoprobe for industrial vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

Contact for wholesale

16699-10-02-02

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-10-02-02 is a velocity seismoprobe for vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec; minimum operating frequency 600 RPM; angular range 90 deg +/-10 deg.

Contact for wholesale

16710

Cable AssemblyBently Nevada

Interconnect Cable

Bently Nevada 16710 series interconnect cable for connecting proximity probes, sensors and monitoring modules in 3300 XL and 3500 machinery protection systems.

Contact for wholesale

16710-03

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-03 is a coaxial shielded interconnect cable for 3300 XL and 3500 Machinery Protection Systems, providing reliable signal transmission between proximity probes, sensors and monitoring modules. 50 ohm impedance, BNC connectors, 3 m.

Contact for wholesale

16710-06

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-06 interconnect cable connects Bently Nevada sensors, proximity probes and monitoring systems. 6 ft (1.83 m), copper-alloy conductors, Teflon insulation.

Contact for wholesale

16710-07

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-07 armored, shielded interconnect cable is engineered for vibration monitoring systems. 82 in (2.08 m), 3-conductor 22 AWG, 3-socket plug to terminal lugs.

Contact for wholesale

16710-08

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-08 armored interconnect cable provides reliable signal transmission in industrial automation systems. 8 ft (2.4 m), 3-conductor 22 AWG, full foil and braid shielding, 10 A.

Contact for wholesale

16710-12

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-12 interconnect cable is a 3-conductor shielded 22 AWG armored cable with a 3-socket plug at one end and terminal lugs at the other. 12 ft (approx. 3.6 m).

Contact for wholesale

16710-14

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-14 armored, shielded interconnect cable is used with vibration and condition monitoring systems. 14 ft (4.27 m), 3-conductor 22 AWG, 3-socket plug to terminal lugs, IP67.

Contact for wholesale

16710-15

Cable AssemblyBently Nevada

16710 Armored Interconnect Cable

The Bently Nevada 16710-15 is an armored interconnect cable, 15 ft length, for vibration monitoring systems.

Contact for wholesale

16710-16

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-16 is a rugged armored interconnect cable for vibration monitoring systems such as the 330400 and 330425 accelerometers. 16 ft (4.88 m), 3-conductor 22 AWG stranded copper.

Contact for wholesale

16710-17

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-17 interconnect cable provides stable signal transmission between sensors and monitoring systems in vibration monitoring applications. 17 ft (approx. 5.2 m), shielded, BNC connectors, copper conductors.

Contact for wholesale

16710-20

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-20 interconnect cable, 20 ft length, for vibration monitoring systems. Made in USA.

Contact for wholesale

16710-25

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-25 interconnect cable is engineered for low-loss signal transmission in condition monitoring and vibration analysis. Made in USA.

Contact for wholesale

16710-26

Cable AssemblyBently Nevada

16710 Interconnect Cable

Bently Nevada 16710-26 interconnect cable for vibration monitoring systems.

Contact for wholesale

16710-27

Cable AssemblyBently Nevada

16710 Interconnect Cable

Bently Nevada 16710-27 interconnect cable for vibration monitoring systems.

Contact for wholesale

16710-32

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-32 is an armored interconnect cable for signal transmission in industrial automation, supporting vibration and acceleration data transfer. 32 ft (9.75 m), 3-conductor shielded 22 AWG copper.

Contact for wholesale

16710-33

Cable AssemblyBently Nevada

16710 Armored Interconnect Cable

The Bently Nevada 16710-33 is an armored interconnect cable, 33 ft length, for industrial monitoring applications. Made in USA.

Contact for wholesale

16710-35

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-35 is a 3-conductor shielded 22 AWG armored interconnect cable with a 3-socket plug at one end and terminal lugs at the other. 35 ft (10.7 m).

Contact for wholesale

16710-40

Cable AssemblyBently Nevada

16710 Armored Interconnect Cable

The Bently Nevada 16710-40 armored interconnect cable connects vibration sensors to monitoring systems. 40 ft (12.2 m), 3-conductor 22 AWG stranded copper, stainless-steel armor, multi-layer shielding.

Contact for wholesale

16710-45

Cable AssemblyBently Nevada

16710 Interconnect Cable

Bently Nevada 16710-45 interconnect cable, 45 ft configuration, for vibration monitoring systems. Made in USA.

Contact for wholesale

16710-50

Cable AssemblyBently Nevada

16710 Armored Interconnect Cable

The Bently Nevada 16710-50 armored interconnect cable provides connections between proximity probes, extension cables and monitoring modules in 3300, 3300 XL and 3500 systems. 50 ft (15.24 m), 3-conductor shielded.

Contact for wholesale

16710-64

Cable AssemblyBently Nevada

16710 Interconnect Cable

Bently Nevada 16710-64 interconnect cable for vibration monitoring systems.

Contact for wholesale

16710-66

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-66 cable connects components within Bently Nevada monitoring systems, transmitting signals between sensors, transmitters and monitoring equipment.

Contact for wholesale

16710-99

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-99 interconnect cable links accelerometers to monitoring systems, providing reliable vibration-data transmission. Copper conductors, Teflon insulation.

Contact for wholesale

167109-30

Cable AssemblyBently Nevada

167109 Interconnect Cable

The Bently Nevada 167109-30 interconnect cable is used with the 3300 XL series and 3500 Machinery Protection Systems for signal transmission between proximity probes, sensors and monitoring modules. 30 ft (9.0 m), 3-conductor shielded armored 22 AWG.

Contact for wholesale

PreviousPage 42 / 703Next