Parts catalogue

High-Speed Ethernet Cable Set

The Honeywell FS-CCI-HSE-02 is a 2.25 m shielded twisted-pair high-speed Ethernet cable set connecting USI-0002 modules to isolated Ethernet interfaces in Honeywell automation systems.

FS-CCI-HSE-30

Red Ethernet Cable (30 m)

The Honeywell FS-CCI-HSE-30 is a 30 m shielded twisted-pair red Ethernet cable for Honeywell Safety Manager networks, RJ45 connectors, up to 1 Gbps, 100 ohm impedance.

FS-CPB-0001

BackplaneHoneywell

Safety Manager Control Processor Backplane

Honeywell Safety Manager / Fail-Safe Controller (FSC) control processor backplane, part of the SIL3 FS-CPCHAS-0001 control processor chassis (now obsolete, superseded by FS-CPCHAS-0003).

FS-CPCHAS-0001

Chassis / Rack

Honeywell

Chassis for Control Processor

The Honeywell FS-CPCHAS-0001 is a chassis for housing control processor modules in Honeywell Experion PKS distributed control systems, dimensions 280 x 482.6 x 177 mm.

Contact for wholesale

FS-DCOM-232/485

Communication ModuleHoneywell

Communication Interface Module (RS-232/RS-485)

The Honeywell FS-DCOM-232/485 is an RS-232/RS-485 communication interface module for Honeywell control systems.

FS-DO-1224

Digital Output Module

The Honeywell FS-DO-1224 is a digital output module for Honeywell control systems.

FS-DO-1624

Digital Output Module

The Honeywell FS-DO-1624 is a digital output module for Honeywell control systems.

FS-FANWR-24R

Cooling FanHoneywell

Fan Assembly Kit

The Honeywell FS-FANWR-24R is a fan assembly kit rated 24 VDC, 9.5 W (12-29 VDC range) for cooling in industrial control systems, dimensions 391 x 142 x 51 mm. CE, UL certified.

FS-GIMTLDO-824

Control BoardHoneywell

PCB Card

The Honeywell FS-GIMTLDO-824 is a printed circuit board interfacing with Honeywell measurement and control devices, weight approximately 280 g.

FS-IO-0001

Input/Output Extender Module

The Honeywell FS-IO-0001 is an I/O extender module for Honeywell safety and automation systems, with 16 channels supporting digital and analog signals (0-10V, 4-20mA), 24V DC, Modbus RTU. CE, UL, CSA, FM certified.

FS-IOB-0001R

Base I/O Module

The Honeywell FS-IOB-0001R is a base I/O module providing 8 inputs and 8 outputs at 12 VDC, RS485/Modbus RTU, IP65 rated, DIN rail mount.

FS-IOB-0001S

Base I/O Module

The Honeywell FS-IOB-0001S is a base I/O module for Honeywell automation systems.

FS-IOBUS-CPIO

Chassis / RackHoneywell

I/O Bus Control Chassis

The Honeywell FS-IOBUS-CPIO is an I/O bus control chassis for the Honeywell TPS distributed control system, interfacing controller and I/O chassis. 24 V DC, 180 VA, 19-inch rack mountable.

FS-IOBUS-CPIOX

ControllerHoneywell

I/O Bus Controller

The Honeywell FS-IOBUS-CPIOX is an I/O bus controller for industrial automation systems, providing a high-speed bus interface for multiple I/O modules, compatible with Honeywell Experion process control systems.

FS-IOCHAS-0001R

Chassis / RackHoneywell

I/O Chassis (Redundant)

The Honeywell FS-IOCHAS-0001R is a redundant I/O chassis providing housing and backplane connectivity for FSC Safety Manager I/O modules, supporting dual modules for fault tolerance. 24 VDC, 0 to +60 C.

FS-IOCHAS-0001S

Chassis / RackHoneywell

Chassis for Non-Redundant I/O Module

The Honeywell FS-IOCHAS-0001S is a chassis for non-redundant I/O modules in Honeywell FSC Safety Manager systems.

FS-PDB-CPX05

Control BoardHoneywell

Power Distribution Board

The Honeywell FS-PDB-CPX05 is a compact power distribution board for centralized power management within controller cabinets, with integrated distribution and protection circuits. Dimensions 190 x 70 x 46 mm.

FS-PDB-IOX05

Control BoardHoneywell

Power Distribution Board Extension Module

The Honeywell FS-PDB-IOX05 is a power distribution board extension expanding low-voltage distribution in Honeywell control systems, with DIN-rail mounting and 4- and 8-position pin headers. Dimensions 170 x 70 x 46 mm. CE, UL, TUV, CSA approved.

FS-PDC-CPSET

Power Distribution Cable Set (Control Processor)

The Honeywell FS-PDC-CPSET is a 24 VDC power distribution cable set for control processors, including two cables (54 cm and 77 cm) connecting bus bar to SM controller. Cable type CC600, 2 x 2.5 mm. UL, CSA approved.

FS-PDC-FTA24P

Power Distribution Cable (PDB-0824 to FTA)

The Honeywell FS-PDC-FTA24P is a 24V, 2A power distribution cable connecting PDB-0824 to the FTA, 2 m length, 2 x 1.31 mm2 (AWG 16) tri-rated cable. UL, CSA approved.

FS-PDC-IOEP1A

Power Distribution Cable

The Honeywell FS-PDC-IOEP1A is a 24 VDC power distribution cable delivering power to I/O modules in Honeywell control systems, rated 110 mA, with EMI shielding.

FS-PDC-IOEP2A

Power Distribution Cable

The Honeywell FS-PDC-IOEP2A is a 24 VDC power distribution cable supplying I/O modules in Honeywell control systems, rated 110 mA, weight 200 g, with EMI shielding.

FS-PDC-IOEP3A

Power Distribution Cable

The Honeywell FS-PDC-IOEP3A is a 24 VDC power distribution cable for FSC Safety Manager systems, supplying I/O modules with shielded multi-core construction, 1 A continuous, -20 to +80 C. UL, CE certified.

FS-PDC-IOIP1A

Input/Output (I/O) Module

The Honeywell FS-PDC-IOIP1A is a modular input/output interface module for flexible analog and digital signal conditioning in industrial automation systems. Field-installable with EMI shielding for stable performance.

FS-PDC-IOR05

Rugged Power Distribution Cable

The Honeywell FS-PDC-IOR05 is a rugged power distribution cable for redundant I/O chassis configurations in Honeywell Safety Manager and DCS systems. Provides 5V/24V DC power delivery and watchdog signal synchronization between controllers; IEC 61508 functional safety rated.

FS-PDC-MB24-1P

Power Distribution Cable

The Honeywell FS-PDC-MB24-1P is a power distribution cable that transfers 24VDC power between control devices. 145 cm length with a Molex connector on one end and bare wires on the other; flame-retardant PVC insulation, RoHS compliant.

FS-PDC-MBMB-1

Power Distribution Cable

The Honeywell FS-PDC-MBMB-1 is a 3-meter power distribution cable rated 55 A at 24/48 VDC, using AWG 8 (HV8-55-c) conductors with a 2-pole jackscrew connector. UL and CSA approved; rated to 125 C.

FS-PSU-240516

Power SupplyHoneywell

Industrial Power Supply Unit

The Honeywell FS-PSU-240516 is a high-reliability industrial power supply unit (24/5 Vdc, 16 A) for Honeywell Safety Manager, DCS, and automation systems. Operating range -5 C to +70 C; hold-up time under 1 ms.

FS-QPP-0001

PLC CPU ModuleHoneywell

Quad Processor Pack Module

The Honeywell FSC FS-QPP-0001 is a quad processor pack module for Safety Manager systems, providing redundant fault-tolerant processing of safety logic.

FS-QPP-0002

PLC CPU ModuleHoneywell

Quad Processor Pack Module

The Honeywell FSC FS-QPP-0002 is a quad processor pack module delivering high-performance redundant processing for Safety Manager systems, with quad redundant CPUs for fault tolerance. CE, UL, CSA, TUV, FM approved.

FS-RO-1024

Relay Output Module

Recognized manufacturer reference available for industrial supply enquiry.

FS-SAI-0410

Analog Input ModuleHoneywell

Safe Analog Input Module

The Honeywell FS-SAI-0410 is a safe analog input module with 4 channels for Honeywell Safety Manager systems.

FS-SAO-0220M

Analog Output ModuleHoneywell

Safe Analog Output Module

The Honeywell FS-SAO-0220M is a safe analog output module with 2 channels (0/4-20 mA) for Honeywell Safety Manager systems.

FS-SCSB-2011CD

Interface ModuleHoneywell

Safe Functional Test Adapter

The Honeywell FS-SCSB-2011CD is a Safe Functional Test Adapter (FTA) for Honeywell DCS and SIS systems. It lets engineers simulate digital and analog field signals during commissioning and maintenance with full electrical isolation, without interrupting active process loops.

FS-SDI-1624

Digital Input ModuleHoneywell

Safe Digital Input Module

The Honeywell FSC FS-SDI-1624 is a safe digital input module providing 16 input channels at 24 VDC for Safety Manager systems, with galvanic channel-to-system isolation and hot-swappable design.

FS-SDI-1648

Digital Input ModuleHoneywell

Safe Digital Input Module

The Honeywell FS-SDI-1648 is a safe digital input module with 16 channels at 48 VDC for Honeywell Safety Manager systems.

FS-SDIL-1608

Digital Input ModuleHoneywell

Safe Loop-Monitored Digital Input Module

The Honeywell FS-SDIL-1608 is a digital input module with 16 loop-monitored channels for proximity switches (DIN 19234/NAMUR) or dry contacts. Includes earth-fault monitoring and is rated up to SIL 3 per IEC 61508.

FS-SDO-04110

Safe Digital Output Module

The Honeywell FS-SDO-04110 is a safe digital output module for Honeywell Safety Manager systems.

FS-SDO-0424

Safe Digital Output Module

The Honeywell FS-SDO-0424 is a safe digital output module with 4 channels rated 24 VDC, 2 A for Honeywell Safety Manager systems.

FS-SDO-0448

Safe Digital Output Module

The Honeywell FS-SDO-0448 is a safe digital output module with 4 channels rated 48 VDC, 0.75 A for Honeywell Safety Manager systems.

FS-SDO-0824

Safe Digital Output Module

The Honeywell FSC FS-SDO-0824 is a safe digital output module providing 8 solid-state 24 VDC channels (up to 550 mA per channel) for Safety Manager systems, with short-circuit protection.

FS-SDOL-0424

Safe Loop-Monitored Digital Output Module

The Honeywell FS-SDOL-0424 is a digital output module with 4 independent channels at 24 VDC, 1.0 A per output. Provides loop monitoring with wire-break and short-circuit detection; 1500 VAC dielectric strength.

FS-SDOL-0448

Safe Loop-Monitored Digital Output Module

The Honeywell FS-SDOL-0448 is a safe loop-monitored digital output module with 4 channels rated 48 VDC, 0.5 A for Honeywell Safety Manager systems.

FS-SICC-0001-L10-FTA

FS-SICC FTA Interconnection Cable

Honeywell FS-SICC system interconnection cable for FTA (Field Termination Assembly) connections.

FS-SICC-0001-L3-DCS

FS-SICC DCS Interconnection Cable Module

Honeywell FS-SICC system interconnection cable for DCS connection.

FS-SICC-0001-L5

FS-SICC System Interconnection Cable

Honeywell FS-SICC system interconnection cable, length variant L5.

FS-SICC-0001/L3

Safety Manager System Interconnection Cable

Honeywell Safety Manager FS-SICC-0001/L3 system interconnection cable (FTA interconnection cable, SIL3) connecting Safety Manager chassis I/O to a 20-pin field termination assembly.

FS-SICC-0001/L5

System Interconnection Cable

The Honeywell FS-SICC-0001/L5 is a system interconnection cable for Honeywell industrial control and safety systems, providing connectivity between modules and racks. 18 AWG high-grade copper, twisted-pair, Teflon insulation; CE/UL/ISO 9001.