Parts catalogue

Analog I/O Module

Recognized manufacturer reference available for industrial supply enquiry.

NFAI835-S50

Analog I/O Module

Yokogawa NFAI835-S50 facilitates analog input and output for measurement and control of analog signals. 8 isolated input channels; standard 4-20 mA signal range; integrates with Yokogawa STARDOM system.

NFAI841-S00

Analog I/O Module

Yokogawa NFAI841-S00 is an analog I/O module with 8 input and 8 output channels for the CENTUM CS 3000 distributed control system. Signal range 0-10V, 4-20mA; 16-bit resolution; 1 ms update rate; 24 VDC.

NFAI841-S50

Analog I/O Module

Yokogawa NFAI841-S50 is an analog input module with 8 channels accepting 4-20 mA DC signals. Supports FOUNDATION Fieldbus function blocks; 24 VDC; 3 W; compact, can mount on the instrument or remotely.

Contact for wholesale

NFAP135-S00

Pulse/High-Speed Counter ModuleYokogawa

Pulse Input Module

Yokogawa NFAP135-S00 is an 8-channel isolated pulse input module. Pulse count frequency range 0 to 10 kHz; supports 2-wire (contact ON/OFF, voltage/current pulse) and 3-wire input types.

NFAP135-S50

Pulse/High-Speed Counter ModuleYokogawa

Pulse Input Module

Yokogawa NFAP135-S50 is an 8-channel pulse input module for industrial control systems. Supports pulse, frequency, period, time-of-flight, velocity and position inputs; up to 50 MHz per channel; channels electrically isolated.

NFAR181-S00

RTD Input ModuleYokogawa

Isolated RTD Input Module

Yokogawa NFAR181-S00 is a 12-channel isolated RTD input module for measuring Pt100 and JPt100 sensor signals. Part of the STARDOM modular controller system; withstanding voltage 1500 V AC; operating -20 to 70 C.

NFAR181-S50

RTD Input ModuleYokogawa

RTD Input Module

Yokogawa NFAR181-S50 is a 12-channel isolated RTD input module for industrial control systems. Pt100 3-wire input; range -200 to 800 C; accuracy +/-0.15 C; cold junction compensation; withstanding voltage 1500 V AC.

NFBU050-S15

Base Module

Yokogawa NFBU050-S15 is a base module for the FCN-RTU system, optimized for low-power, high-performance applications. Wide input voltage 10-30 V DC; supports up to 8 additional I/O modules when paired with the NFBU200; hot-swappable modules.

NFBU200

Base Module

Recognized manufacturer reference available for industrial supply enquiry.

NFBU200-015

Base Module

Yokogawa NFBU200-015 is a modular baseplate for the FCN-500 autonomous controller in the STARDOM control system, mounting CPU, power, and I/O modules. Dimensions 120 x 50 x 60 mm; SB Bus and E2 Bus interfaces; 19-inch rack or DIN rail; duplexed power supply capability.

NFBU200-S05

Base Module

Yokogawa NFBU200-S05 is a base module for the FCN-500 autonomous controller in the STARDOM series. Supports duplexed CPU, power supply, SB bus and control network; hot-swappable; fanless; ECC memory; 19-inch rack or DIN rail; max current 0.4 A at 5 VDC.

NFBU200-S10

Base Module

Yokogawa NFBU200-S10 is a base module in the FCN-500 series for control and monitoring systems. Supports duplexed CPU and power supply; up to 8 standard I/O modules; Ethernet, SB bus and E2 bus interfaces; rack-mounted.

NFCB301-C100

CableYokogawa

SB Bus Cable

Yokogawa NFCB301-C100 is an SB Bus cable / local bus extension module for STARDOM control systems (FCN-100, FCN-500, FCJ, FCN-RTU), extending the SB bus for controller-to-module communication.

NFCP050-S00

CPU Module

Yokogawa NFCP050-S00 is a compact CPU module for FCN-RTU systems with integrated I/O. Processor SH-4A (SH7730) 256 MHz; 128 MB ECC main memory; 128 MB on-board flash; IEC 61131-3 programming; Java runtime; 5 VDC supply.

NFCP050-S15

CPU Module

Yokogawa NFCP050-S15 is a CPU module for FCN-RTU systems. Processor SH-4A (SH7730) 256 MHz; 128 MB on-board flash; 3 x RS-232 and 1 x RS-422/RS-485 serial ports; built-in I/O.

NFCP050-SA5

CPU Module

Yokogawa NFCP050-SA5 is a CPU module for FCN-RTU controllers with built-in I/O and software licenses. Processor SH-4A (SH7730) 256 MHz; 128 MB ECC main memory; 16 DI, 8 DO, 12 AI, 2 AO; 10/100 Mbps Ethernet; IEC 61131-3; 5 VDC.

NFCP100

CPU Module

Recognized manufacturer reference available for industrial supply enquiry.

NFCP100-S00

CPU Module

Yokogawa NFCP100-S00 is part of the FCN (Field Control Node) series with ECC memory for high reliability. Low heat dissipation (fanless); supports duplexing of CPU, power supply and control network; compatible with various I/O modules; includes RAS functions.

NFCP100-S00

Field Control Processor Module

Yokogawa NFCP100-S00 is a Field Control Processor (CPU) module for the STARDOM FCN / CENTUM platform, executing regulatory, sequence and computation control with ECC-backed memory and support for hot-swap redundant operation.

NFCP100-S05

CPU Module

Yokogawa NFCP100-S05 is part of the STARDOM FCN (Field Control Node) series with ECC memory for high reliability. Fanless low heat dissipation; supports duplexing of CPU, power supply and control network; compatible with various I/O modules; RAS functions.

NFCP501-S05

CPU Module

Yokogawa NFCP501-S05 is the central processing unit for the FCN control system, handling control logic, I/O management and device communication. High-speed CPU; ECC memory; Ethernet and other industrial protocols; supports duplexed power supply; compatible with FAST/TOOLS.

NFCP501-W05

CPU Module

Yokogawa NFCP501-W05 is part of the STARDOM series for high-speed, high-reliability control. Real-time operating system; IEC 61131-3 languages; Duolet virtual machine; dual-redundant configuration allowing continuous operation during module replacement.

NFCP501-W15

Control Processor Module

Yokogawa NFCP501-W15 is part of the STARDOM autonomous controller series. High-speed CPU for real-time control; STARDOM FCN compatible; Ethernet and Modbus interfaces; rack-mounted.

NFCP502-S05

CPU Module

Yokogawa NFCP502-S05 is a CPU module for FCN with 4 Ethernet ports. Processor Atom E3815 1.46 GHz; 256 MB ECC main memory; 1 GB on-board flash; SD card slot; RS-232-C port; dimensions 65.8 x 130 x 149.3 mm; duplex configuration possible.

NFCP502-W05

CPU Module

Yokogawa NFCP502-W05 is a CPU module for FCN with 4 Ethernet ports and extended functions. Processor Atom E3815 1.46 GHz; 256 MB ECC main memory; 1 GB on-board flash; SD card slot; RS-232-C port; SB bus duplex interface.

NFCP502-W15

CPU Module

Yokogawa NFCP502-W15 is the central processing unit for the FCN control system, managing control logic, I/O operations and communication. High-speed CPU; ECC memory; Ethernet and other industrial protocols; supports duplexed power supply; compatible with FAST/TOOLS.

NFDR541-P00

Relay Output ModuleYokogawa

Relay Output Module

Yokogawa NFDR541-P00 is a relay output module for process control and factory automation. Multiple relay outputs; output current up to 10A; 5V DC supply; programmable delay and repeat rates; isolation 1.5 kVrms.

NFDV151-P10

Digital Input Module

Yokogawa NFDV151-P10 is a 32-channel digital input module that receives and processes digital signals from field devices. Rated input 24 V DC; input ON 18-26.4 V DC; input OFF 5.0 V DC or less; input current 4.1 mA per channel.

NFDV151-P60

Digital Input Module

Yokogawa NFDV151-P60 is a 32-channel digital input module compatible with STARDOM controllers. Rated input 24 VDC; input ON 18-26.4 VDC; input OFF 5.0 VDC or less; 4.1 mA per channel; galvanically isolated; supports sinking and sourcing inputs.

NFDV157-S00

Digital Input Module

Yokogawa NFDV157-S00 is a 32-channel digital input module with 24V DC input via pressure clamp terminals. High-speed response; high noise immunity; isolated operation; wide operating temperature range.

NFDV157-S00

Digital Input Module

Yokogawa NFDV157-S00 is a 32-channel, 24 V DC digital input module (pressure-clamp terminal) for STARDOM FCN / FIO distributed control systems.

NFDV161-P00

Digital Input Module

Yokogawa NFDV161-P00 is a 16-channel digital input module compatible with STARDOM controllers. Accepts 24 VDC digital signals from dry contact switches or sensors; high input impedance (~10 kOhm); ~10 ms refresh; optocoupler isolation.

NFDV161-P01

Digital Input Module

Recognized manufacturer reference available for industrial supply enquiry.

NFDV161-P50

Digital Input Module

Yokogawa NFDV161-P50 is a 64-channel digital input module for industrial control systems. Rated input 24 V DC; input ON 18-26.4 V DC; input OFF 5.0 V DC or less; 2.5 mA per channel; withstanding voltage 2 kV AC; pressure clamp or MIL connector.

NFDV161-P51

Digital Input Module

Recognized manufacturer reference available for industrial supply enquiry.

NFDV551

Digital Output Module

Yokogawa NFDV551 is a 32-channel, 24 V DC digital output module with isolated current-sink transistor outputs for STARDOM FCN / FIO distributed control systems.

NFDV551-P10

Digital Output Module

Yokogawa NFDV551-P10 is part of the STARDOM family, providing 32 digital output channels for controlling external devices. Sink or source output; 24 VDC; up to 2 A per channel; channel isolation; operating -20 to +70 C.

NFDV551-P60

Digital Output Module

Yokogawa NFDV551-P60 provides 32 individual digital outputs for controlling devices and processes. 24V DC; each channel electrically isolated; DIN rail mounting; dimensions 90 x 60 x 30 mm; weight 200 g.

NFDV557-S00

Digital Output Module

Yokogawa NFDV557-S00 is a 32-channel digital output module for industrial automation with isolated outputs. 24V DC; pressure clamp terminals; MODBUS RTU support; operating -10 to +55 C.

NFDV557-S00

Digital Output Module

Yokogawa NFDV557-S00 is a 32-channel, 24 V DC digital output module with transistor outputs (pressure-clamp terminal) for STARDOM FCN / FIO distributed control systems.

NFDV561

Digital Output Module

Yokogawa NFDV561 is a 64-channel, 24 V DC isolated digital output module with current-sink transistor outputs (MIL connector) for STARDOM FCN / FIO distributed control systems.

NFDV561-P00

Digital Output Module

Yokogawa NFDV561-P00 is part of Yokogawa's automation solutions providing 32 digital output channels. Sink or source output; 24 VDC; up to 2 A per channel; channel isolation; operating -20 to +70 C.

NFDV561-P01

Digital Output Module

Recognized manufacturer reference available for industrial supply enquiry.

NFDV561-P50

Digital I/O Module

Yokogawa NFDV561-P50 supports 32- or 64-channel transistor contact signals for digital output control. Configurable fallback actions (HOLD/OFF/no action); 24V DC per module; integrates with Yokogawa control systems.

NFET8327B102

Solenoid ValveASCO

Direct Operated Solenoid Valve High Flow

ASCO direct-operated high-flow solenoid valve.

NFLC121-S00

Communication ModuleYokogawa

Serial Communication Module

Yokogawa NFLC121-S00 is a CANopen communication module for STARDOM FCN and FCN-RTU systems, acting as master node. 1 port; baud rate 10 kbps to 1 Mbps; supports up to 127 nodes; signal-to-system isolation; current consumption 700 mA at 5 V DC.

NFLF111-S00

Communication ModuleYokogawa

Fieldbus Communication Module

Yokogawa NFLF111-S00 is a Foundation Fieldbus communication module functioning as a Link Master device for the FCN. Manages communication schedules; 2 H1 fieldbus segments; 24 VDC; rack or panel mountable.