Parts catalogue

System 57 Sensor Drive / Control Card

Honeywell System 57 sensor drive / control card. Powers and conditions industrial 4-20 mA sensors for stable signal acquisition in process control. Made in USA.

05701-A-0284

Gas Detection ControllerHoneywell

System 57 Catalytic Sensor Drive Card

Honeywell System 57 catalytic sensor drive / single-channel control card for gas detection. Conditions catalytic sensor signals, displays real-time readings on front-panel LCD, and triggers LED/relay alarms when gas exceeds preset thresholds. Dimensions 176 x 35.2 x 212 mm.

05701-A-0285

Analog Output ModuleHoneywell

System 57 Analog Output Module

Honeywell System 57 analog output module. Converts sensor/controller signals into isolated 0-20 mA or 4-20 mA analog output for external instruments. Dimensions 105 x 112 x 25 mm. Made in USA.

05701-A-0288

Control BoardHoneywell

System 57 Engineering / Function Card

Honeywell System 57 function/engineering card for gas detection and safety control. Interfaces catalytic gas detectors (up to 4 sensor inputs), 24 VDC (18-32 VDC), card-slot mounting in System 57 rack. Dimensions approx. 133 x 25 x 190 mm. Made in USA.

Contact for wholesale

05701-A-0301

System 57 Single-Channel Control Card

Honeywell System 57 single-channel control card (4-20 mA). Four-part liquid display (25-segment analogue, four-character digital and message, icon section). A1/A2/A3 gas alarm LEDs, fault/inhibit push-button, alarm reset. 18-32 V DC supply, alarm setpoint resolution 1% FSD, electronic drift <2% over 6 months. Dimensions 17 x 2.5 x 11.2 cm.

05701-A-0302

System 57 Single-Channel Catalytic Control Card

Honeywell System 57 single-channel catalytic control card for gas detection. 25-segment analogue plus four-character digital and message display, A1/A2/A3 gas alarm LEDs with fault and inhibit indicators, 18-32 V DC supply, alarm resolution 1% FSD, electronic drift <2% per 6 months. Dimensions 17 x 2.5 x 11.2 cm.

05701-A-0302

Gas Detection ControllerHoneywell

Single Channel Control Card, Catalytic

Honeywell Analytics System 57 single-channel catalytic gas detection control card; 18-32 V DC supply with 25-segment display, A1/A2/A3 gas alarm LEDs and fault/inhibit indicators for combustible-gas monitoring.

05701-A-0325

System 57 DC Input Card

Honeywell System 57 DC input card for industrial automation. Converts DC voltage signals (+/-10V to +/-100V) into digital data, 12/16-bit configurable resolution, sampling up to 250 Hz, Modbus/HART/Profibus, IP65, operating temperature -20C to +60C. Dimensions 120 x 75 x 25 mm.

05701-A-0325

Gas DetectorHoneywell

System 57 DC Input Card

Honeywell System 57 (5704 Series) DC input card. Part of the System 57 family for monitoring field-mounted industrial gas detectors. Up to 64 channels in a 19-inch subrack (3U card format), 32 channels in a half 19-inch sub-rack.

05701-A-0326

System 57 Single-Channel Field Interface Card

Honeywell System 57 single-channel field interface card. Conditions 4-20 mA signals from 2- or 3-wire toxic or combustible gas sensors. 24 VDC, ATEX/UL/CSA approved, hot-swappable, LED diagnostics. Dimensions 132 x 105 x 40 mm.

05701-A-0327

System 57 Double SPCO Relay Card

Honeywell System 57 double SPCO (single-pole change-over) relay card. Two independent SPCO relay outputs for switching, interlocking and control in PLC/DCS/SCADA systems. 24 VDC, Modbus/RS-485/Ethernet, IP66. Dimensions 102 x 25 x 112 mm.

05701-A-0328

System 57 Analytics Relay Card

Honeywell System 57 analytics relay card. Provides relay output interface for alarm, control and signal-switching in Honeywell industrial automation and safety systems.

05701-A-0329

System 57 Triple DPCO Relay Card

Honeywell System 57 triple DPCO relay card. Three independent relay channels each with dual Form-C (SPDT) contacts for alarm, fault, inhibit and general signaling. Per-channel LED status, 3U rack-mount card for 19-inch enclosures. Dimensions 25 x 75 x 110 mm. Made in USA.

05701-A-0330

System 57 Single-Channel Control Card

Honeywell System 57 single-channel control card. 24V operation, input polarity protection, signal conditioning for industrial control and monitoring.

05701-A-0361

System 57 Engineering Card

Honeywell System 57 engineering card. Provides a common rack interface to commission and operate each fitted control card. Indicators for Power On (green) and Unlocked (red), Up/Down, Reject/Accept and Print push-buttons; functions for bead mA, alarms, zero, signal, span, inhibit and clock.

05701-A-0502

PLC ModuleHoneywell

System 57 PLC I/O Module

Honeywell System 57 PLC expansion module (input/output, communication or power, depending on configuration). 24V DC or higher, operating temperature -20C to +70C, IP20 or higher.

05701-A-0511

Chassis / RackHoneywell

System 57 Rack Assembly

Honeywell System 57 rack assembly. Houses multiple control modules for centralized management of gas detectors and control components. 19-inch standard width, 3U height, rear field wiring, 8+1 FTE switch ports, C-series 24 VDC compatible. Made in USA.

05701-A-0512

Chassis / RackHoneywell

System 57 Half-Width PLC Rack

Honeywell System 57 half-width 19-inch, 3U PLC/DCS rack. 8-way rear-channel rack assembly housing up to eight control cards (CPUs, communication modules, analog/digital I/O), rear field wiring, 24 VDC system power.

05704-A-0121

Quad Relay Interface Card (4 SPCO)

Honeywell quad relay interface card. Interfaces four sensors to the control card with reliable signal transmission and relay operation. 4 x SPCO relays, selectable latching/non-latching and energised/de-energised, contact rating 5 A at 110/250V AC, power 1.7W max / 1W typical.

05704-A-0122

Relay Interface Card

Honeywell relay interface card connecting four detector loops to control cards. 12 x SPCO + 4 x SPST relay contacts, selectable latching/non-latching and energised/de-energised, power 6.5W max / 3.5W typical. Dimensions approx. 12.2 x 5.2 x 13.2 cm.

05704-A-0123

Single-Channel Expansion Relay Card

Honeywell System 57 single-channel control / expansion relay card with alarm and display functions for connected gas detectors. Microprocessor-controlled, 24V DC (18-32V), configurable alarm setpoints, front-panel LCD, analog and digital outputs.

05704-A-0131

Relay Interface Card

Honeywell relay interface card. Relay operation selectable latching/non-latching and energised/de-energised, 12 x SPCO + 4 x SPST relays, field terminals 2.5mm2 (14 AWG), power 6.5W max / 3.5W typical, dimensions approx. 12.2 x 5.2 x 13.2 cm, weight 0.5 kg.

05704-A-0134

System 57 Four-Channel Catalytic Control Card

Honeywell System 57 control card interfacing up to four catalytic gas detectors. Backlit panel showing channel status and gas readings, per-channel alarm LEDs, push-button alarm reset, master fault/A1/A2/A3 relay functions via rear connections. Indoor use. Dimensions 13.3 x 2.54 x 19.0 cm. Made in USA.

05704-A-0144

Analytics Four-Channel Catalytic Control Card

Honeywell four-channel control card with catalytic input. Constant-current drive, initial accuracy +/-1%, electronic current adjustment 90-315 mA in 1 mA steps, max drive voltage 10V, full-scale signal range 15-300 mV, max line resistance 40 ohms at 200 mA, fault detection for open/short circuit and single bead failure. Power 12.8W max / 8.5W typical.

05704-A-0145

Four-Channel Control Card (4-20 mA)

Honeywell four-channel control card (4-20 mA input). Provides control, display and alarm facilities for up to four connected gas detectors. Isolated 24V +/-5% regulated loop-powered output, 25 mA max; short-circuit and open-circuit loop protection. Power 8.3W max / 7.5W typical.

05704-A-0145

Gas Detection ControllerHoneywell

Four Channel Control Card

Honeywell Analytics four-channel control card for 4-20 mA gas detector inputs, providing control, backlit LCD bargraph display and alarm facilities for up to four connected gas detectors in a 1-inch-wide package.

05704-A-0146

Fire Alarm Control PanelHoneywell

5704F Fire Control Card

Honeywell 5704F fire control card. 4 fire zone inputs, 2 switched DC outputs, single 3-function remote input, up to 16 configurable relay outputs. Dimensions 17.2 x 2.5 x 13.2 cm, net weight 0.16 kg.

05704-A-0148

Fire Alarm Control PanelHoneywell

5704F Fire Status Panel

Honeywell 5704F fire status panel. Indicator lamps for Fire, Fault, Inhibit, Silence, Walk Test and Earth Leakage Fault; channel functions for Walk Test and Inhibit; user controls Accept, Silence, Reset, Lamp Test; audible alerts for Fire, Fault, Accepted Fire and Accepted Fault. Net weight 0.5 kg.

05704-C-0160

Cable AssemblyHoneywell

Analytics Interconnect Cable

Honeywell Analytics interconnect cable.

059-B11D-000

MiniRAE Lite+ Portable Handheld VOC Monitor

RAE Systems (Honeywell) MiniRAE Lite+ portable handheld VOC monitor with PID 10.6 eV, rechargeable Li-ion battery and universal adapter (monitor only). Built-in wireless modem for real-time data connectivity up to 3 km via Bluetooth or mesh network.

059-B11D-100

MiniRAE Lite+ Portable Handheld VOC Monitor

RAE Systems (Honeywell) MiniRAE Lite+ portable handheld VOC monitor with PID 10.6 eV 1/2 inch lamp, rechargeable Li-ion battery, universal adapter, BLE data transmission and calibration kit. Built-in wireless modem for real-time data connectivity up to 3 km.

059-D310-000

UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor

RAE Systems (Honeywell) UltraRAE 3000 portable handheld compound-specific VOC monitor with 9.8 eV lamp, Li-ion battery and universal charger. PID extended range 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode.

059-D310-200

UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor

RAE Systems (Honeywell) UltraRAE 3000 portable handheld compound-specific VOC monitor with 9.8 eV lamp, Li-ion battery, universal charger, accessories kit and calibration kit. PID extended range 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode.

05DCA6F-OY

Servo MotorYaskawa

SGMGH Servo Motor

Yaskawa SGMGH-series AC servo motor.

05DE-OY

Servo DriveYaskawa

SGDH Servopack Servo Amplifier

Yaskawa SGDH-series Servopack servo amplifier/drive.

05F5B3A-090A

VFD / InverterKEB

COMBIVERT F5 Frequency Inverter

KEB COMBIVERT F5 frequency inverter, 0.4 kW, 220V class; controls asynchronous and synchronous AC motors.

060-110166

KP1 Pressure Switch

Danfoss KP1 pressure switch. Regulation range -0.2 to 7.5 bar, differential 0.7-4.0 bar, SPDT, auto reset, flare 1/4 male connection, IP44, max working pressure 17 bar.

060-110366

KP1 Low Pressure Switch

Danfoss KP1 low pressure switch. Regulation range -0.9 to 7 bar, differential 0.7 bar, SPDT, manual min reset, flare 1/4 male connection, IP30, max working pressure 17 bar.

060-112066

KP2 Pressure Switch

Danfoss KP2 pressure switch. Regulation range -0.2 to 5 bar, differential 0.4-1.5 bar, SPDT, auto reset, flare 1/4 male connection, IP44, max working pressure 17 bar.

060-113066

KPI35 Pressure Switch

Danfoss KPI35 pressure switch. Regulation range -0.2 to 8 bar, differential 0.4-1.5 bar, auto reset, G 1/4 connection, IP30, max working pressure 18 bar.

060-113366

KP35 Pressure Switch

Danfoss KP35 pressure switch. Regulation range -0.2 to 7.5 bar, differential 0.7-4.0 bar, auto reset, G 1/4 connection, IP30, max working pressure 17 bar.

060-113466

KP35 Pressure Switch

Danfoss KP35 pressure switch. Regulation range -0.2 to 7.5 bar, differential 0.7-4.0 bar, auto reset, G 1/4 connection, IP30, max working pressure 17 bar.

060-113766

KP36 Pressure Switch

Danfoss KP36 pressure switch, regulation range 2.00-14.00 bar, differential 0.70-4.00 bar, auto reset, G 1/4 connection, IP30, max working pressure 17.0 bar.

060-117166

KP5 Pressure Switch

Danfoss KP5 pressure switch. Regulation range 8-32 bar, differential 1.8-6.0 bar, SPDT, auto reset, flare 1/4 male connection, IP44, max working pressure 35 bar.

060-117366

KP5 High Pressure Switch

Danfoss KP5 high pressure switch. Regulation range 8-32 bar, differential 3.0 bar, SPDT, manual max reset, flare 1/4 male connection, IP30, max working pressure 35 bar.

060-120566

KP7 ABS Dual Pressure Switch

Danfoss KP7 ABS dual pressure switch. Both sides regulation 8-32 bar, differential 4.0 bar, 2 SPST(NC) contacts, manual max reset both sides.

060-124366

KP15 Dual Pressure Switch

Danfoss KP15 dual pressure switch. Left side -0.2 to 7.5 bar, right side 8-32 bar, differential left 0.7-4.0 bar / right 4.0 bar, SPDT.

060-124566

KP15 Dual Pressure Switch

Danfoss KP15 dual pressure switch. Left side -0.9 to 7 bar, right side 8-32 bar, differential left 0.7 bar / right 4.0 bar, SPDT, manual min reset left side.