Parts catalogue

M1/M1E Processor Adaptor

M1/M1E processor adaptor for the Modicon Momentum automation platform. x86 processor at 50 MHz, Ethernet, Transparent Ready Class B10, 1 I/O bus + 1 Ethernet port.

171CCC96030

M1/M1E Processor Adaptor

M1/M1E processor adaptor for the Modicon Momentum automation platform. x86 processor at 50 MHz, Ethernet, Transparent Ready Class B10, Lexan housing, 8192 I/O.

171CCC98030

M1/M1E Processor Adaptor

M1/M1E processor adaptor for the Modicon Momentum automation platform. x86 processor at 50 MHz, Ethernet and Modbus, Transparent Ready Class B10, web page loader support.

171CCS78000

CAT 3512BContact for wholesale

M1/M1E Processor Adaptor

M1/M1E processor adaptor for the Modicon Momentum automation platform from Schneider Electric.

Contact for wholesale

172-0919

PistonCaterpillar

Piston Crown

Piston crown assembly for Caterpillar 3512B generator set engine, part of the engine's combustion assembly.

172-3052

PinCaterpillar

Structural pin for Caterpillar 395, 390F, and 390D large hydraulic excavators. Used in boom, stick, or bucket linkage assemblies.

CAT 395Contact for wholesale

172-3259

AdapterCaterpillar

Adapter

Adapter for Caterpillar CP-433C vibratory soil compactor.

CAT CP-433CContact for wholesale

172-3284

Piston RingCaterpillar

Piston Ring

Piston ring for Caterpillar 3406E diesel engine. Provides a gas seal and oil control between the piston and cylinder bore.

CAT C15Contact for wholesale

172-7634

ShaftCaterpillar

Slip Joint

Slip joint assembly for the Caterpillar 773E off-highway mining truck driveline.

CAT 773EContact for wholesale

172-7813

PinCaterpillar

Boom Pin

Boom pin with 179.85mm outer diameter for Caterpillar large excavator boom linkage. Connects the boom to the upper structure or stick assembly.

CAT CB-335DContact for wholesale

172-8148

Oil SealCaterpillar

Face Seal

Face-type seal for Caterpillar CB-334D, CB-334E, CB-335D, and CB-335E vibratory asphalt compactors. Provides a flat-face sealing surface in rotating or oscillating assemblies.

172-9389

ECUCaterpillar

Engine ECU Controller

Engine ECU (Electronic Control Unit) computer board for Caterpillar machinery engine management.

172002-5

Machinery Protection ModuleBently Nevada

General Purpose Equipment Monitor

Bently Nevada 172002-5 is a 1900/65A general-purpose equipment monitor for continuous vibration and temperature monitoring of industrial machinery, with four configurable vibration channels and 4-20 mA analog outputs.

172004-5

Machinery Protection ModuleBently Nevada

General Purpose Equipment Monitor

Bently Nevada 172004-5 is a 1900/65A general-purpose equipment monitor for continuous vibration and temperature monitoring of industrial machinery, with four configurable vibration channels and 4-20 mA analog outputs.

172103-01

I/O ModuleBently Nevada

3500/65 RTD/Isolated Tip TC I/O Module

Bently Nevada 172103-01 is an RTD/Isolated Tip Thermocouple I/O module with internal terminations for the 3500/65 Temperature Monitor, accepting 3-wire and 4-wire RTD and isolated-tip TC inputs evaluated against programmable alarm setpoints.

172109-01

I/O ModuleBently Nevada

3500/65 Temperature Monitor I/O Module

Bently Nevada 172109-01 is a 3500/65 series I/O module for high-precision temperature monitoring, supporting 16 channels of 3-wire/4-wire RTD and isolated-tip thermocouple inputs.

172115-01

Terminal BlockBently Nevada

External Termination Block

Bently Nevada 172115-01 is an external termination block with Euro-style connectors for RTD and isolated-tip thermocouple inputs, designed for use with the 3500/65 Temperature Monitor.

172323-01

Machinery Protection ModuleBently Nevada

1900/65A General Purpose Equipment Monitor

Bently Nevada 172323-01 is a 1900/65A general-purpose equipment monitor with 4 transducer inputs, 4 temperature inputs, 6 relay outputs, four 4-20 mA outputs and Modbus communication over Ethernet and RS232/485.

Hitachi ZX35+2Contact for wholesale

172457-73711

Swing MotorHitachi

Swing Motor

KYB (MSG-27P-23E) swing motor assembly for Hitachi ZX35, ZX50, and ZX55 compact excavators. Converts hydraulic flow into rotary motion to drive the upper-structure swing system.

17279049

HubVolvo

Hub Kit

Hub kit for Volvo construction machinery. Specific model not identified from available data.

172959

Control ValveFesto

HEE Shut-Off Valve

Festo HEE-D-MIDI-24 on/off (shut-off) valve, 24V, order number 172959.

172JNN21032

Interface ModuleSchneider Electric

Serial Link Option Adapter Module

Serial link option adapter module for Modicon Momentum. Selectable RS232/RS485 via a 9-pin D-shell, battery-backed real-time clock, 5 V DC supply, 700 mA, Lexan housing.

172PNN21022

Communication ModuleSchneider Electric

Ethernet TCP/IP Option Adapter Module

Ethernet TCP/IP communication option adapter for the Modicon Premium platform. RJ45 10/100 Mbit/s, Modbus TCP and Uni-Telway, up to 64 simultaneous connections, IP20.

172PNN26022

Communication ModuleSchneider Electric

Momentum Ethernet Redundant Option Adapter

Modicon Momentum Ethernet redundant communication option adapter from Schneider Electric.

CAT 980GContact for wholesale

173-0888

Universal JointCaterpillar

Universal Joint

Universal joint rotor drive assembly (GP-ROTOR DRIVE) for the Caterpillar 980G, 980H, 980K, 980M, and related medium wheel loaders. Transmits rotational power through a drivetrain angle.

173-0946

Sprocket SegmentCaterpillar

Sprocket Segment

Sprocket segment (SEGMENT GP-SPROCKET) for Caterpillar D6H and D6R track-type tractors including LGP, XL, and XR variants. Engages the track chain to drive the machine; 5-hole forged segment weighing approximately 9–11 kg.

CAT D6RContact for wholesale

173-1498

PulleyCaterpillar

Idler Pulley

8-groove idler pulley for Caterpillar excavators and large machines including 330D, 336D, 340D, 345B, 345C, 345D, 349D, 365B, and 385B. Guides and tensions the serpentine accessory drive belt.

CAT D9TContact for wholesale

173-3270

Clutch DiscCaterpillar

Friction Disc

Friction disc assembly for Caterpillar 784B mining truck braking or retarder system.

CAT 784BContact for wholesale

17325-151

Control BoardGE Fanuc

VMICPCI Board

VMIC VMICPCI-17325-151 board. Available for wholesale industrial supply enquiry.

1732DS-IB8

Safety I/O ModuleAllen-Bradley

ArmorBlock Guard I/O Safety Digital Input Module

Allen-Bradley 1732DS-IB8 ArmorBlock Guard I/O 8-input safety digital input module.

1732DS-IB8XOBV4

Safety I/O ModuleAllen-Bradley

ArmorBlock Guard I/O Safety Combo Input/Output Module

Allen-Bradley 1732DS-IB8XOBV4 ArmorBlock Guard I/O safety module with 8 digital inputs and 4 outputs.

1734-485ASC

POINT I/O RS-485 ASCII Communication Module

Allen-Bradley 1734-485ASC POINT I/O RS-485 ASCII serial communication module.

1734-ACNR

POINT I/O ControlNet Network Adapter

Allen-Bradley 1734-ACNR POINT I/O ControlNet network adapter. ControlNet at 5 Mbps, 24V DC, DIN rail mount, supports redundant communication.

1734-ADN

POINT I/O DeviceNet Adapter

Allen-Bradley 1734-ADN POINT I/O DeviceNet adapter bridging a DeviceNet network to POINT I/O modules. Up to 63 modules, 125/250/500 kbps, DIN rail mount.

1734-AENRT

POINT I/O EtherNet/IP Adapter Module

Allen-Bradley 1734-AENRT POINT I/O EtherNet/IP adapter module.

1734-AENT

POINT I/O EtherNet/IP Adapter

Allen-Bradley 1734-AENT POINT I/O EtherNet/IP network adapter.

1734-AENTK

POINT I/O EtherNet/IP Adapter (Conformal Coated)

Allen-Bradley 1734-AENTK POINT I/O EtherNet/IP network adapter with conformal coating (K) for harsh environments.

1734-AENTR

POINT I/O Dual-Port EtherNet/IP Adapter

Allen-Bradley 1734-AENTR POINT I/O dual-port EtherNet/IP network adapter with two Ethernet ports supporting daisy-chain and ring topologies. 24V DC, operating range -10 to +55 C.

1734-ARM

Expansion ModuleAllen-Bradley

POINT I/O Address Reserve Module

Allen-Bradley 1734-ARM POINT I/O address reserve module, used to reserve a slot/node address in a POINT I/O system.

1734-CTM

Termination UnitAllen-Bradley

POINT I/O Common Terminal Module

Allen-Bradley 1734-CTM POINT I/O common terminal module.

1734-EP24DC

Power Supply ModuleAllen-Bradley

POINT I/O 24V DC Expansion Power Supply

Allen-Bradley 1734-EP24DC POINT I/O 24V DC expansion power supply. Input 10 to 28.8V DC, up to 10 A, supports 4 to 17 modules depending on current draw.

1734-FPD

Power Distribution UnitAllen-Bradley

POINT I/O Field Potential Distributor Module

Allen-Bradley 1734-FPD POINT I/O field potential distributor module, separating field power into independent power distribution groups. 24V DC, DIN rail mount.

1734-IA4

POINT I/O 4-Channel 120V AC Digital Input Module

Allen-Bradley 1734-IA4 POINT I/O 4-channel 120V AC digital input module.

1734-IB2

POINT I/O 2-Channel Digital Input Module

Allen-Bradley 1734-IB2 POINT I/O 2-channel 24V DC digital input module.

1734-IB4

POINT I/O 4-Channel Digital Input Module

Allen-Bradley 1734-IB4 POINT I/O 4-channel 24V DC digital input module. Input range 10 to 28.8V DC, 75 mA at 24V DC, DIN rail mount.

1734-IB8

POINT I/O 8-Channel Digital Input Module

Allen-Bradley 1734-IB8 POINT I/O 8-channel 24V DC sinking digital input module. IP20, DIN rail mount.

1734-IB8S

Safety I/O ModuleAllen-Bradley

POINT Guard I/O 8-Channel Safety Input Module

Allen-Bradley 1734-IB8S POINT Guard I/O 8-channel safety input module for monitoring emergency stops, safety gates and light curtains. 24V DC, <6.2 ms response, compatible with GuardLogix/CompactLogix.

1734-IE2C

Analog Input ModuleAllen-Bradley

POINT I/O 2-Channel Analog Current Input Module

Allen-Bradley 1734-IE2C POINT I/O 2-channel analog current input module. 0-20 mA / 4-20 mA, 16-bit resolution, 24V DC, DIN rail mount.