Parts catalogue

NIM Modem Board

Honeywell 51305896-200 is a Network Interface Module (NIM) modem board for Honeywell distributed control systems, providing UCN communication. 24V DC, fault diagnostics, EMI shielding.

51305905-175

RTD Input Module

Honeywell 51305905-175 is an RTD (Resistance Temperature Detector) input module for Honeywell process control systems.

51305907-175

MC-TAMR04 Low Level Analog Input Multiplexer

Honeywell 51305907-175 (MC-TAMR04) is a low level analog input multiplexer for Honeywell DCS platforms including Experion PKS and TDC. 4 input channels, 0-10 V or 0-20 mA, RTD support.

51305943-100

DCS ControllerHoneywell

DCS Digital Control System

Honeywell 51305943-100 is a modular DCS digital control system. 8 analog outputs, 16 digital inputs, Modbus TCP/IP, 120/240V AC.

Contact for wholesale

51305980-124

Redundant C300 Controller Cable

Honeywell 51305980-124 is a shielded multi-core industrial signal cable for Honeywell DCS platforms (C300 redundancy). 24 VDC, EMI/RFI shielding, factory-molded locking connectors.

51305980-184

100 Base-T Ethernet Cable

Honeywell 51305980-184 is a 100 Base-T Ethernet cable for Honeywell Measurex systems. 84 inches, RJ45, yellow boots, IP20 rated.

51305980-284

100 Base-T Ethernet Cable

Honeywell 51305980-284 is a fault-tolerant 100 Base-T Ethernet cable for Honeywell control systems. 84 inches, RJ45 with green boot, 100 Mbps, 100 ohm impedance.

51305980-836

Redundant C300 Controller Cable

Honeywell 51305980-836 is a redundant C300 controller cable for the Honeywell Experion LX system, linking two C300 controllers and their IOTA modules. 100BASE-T Ethernet, 36 inches, orange boots.

51306152-400

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51306154-100

Circuit Board

Honeywell 51306154-100 is a circuit board (PCB) for Honeywell control systems.

51306198-100

Digital Input ModuleHoneywell

Digital Input IOTA Board

Honeywell 51306198-100 is a Digital Input 24V IOTA board for Honeywell C300 controller systems. 16 digital inputs, each channel 24V DC or 115V AC configurable.

51306199-299

CAT5e Cable, 330ft

Honeywell 51306199-299 is a 330 ft CAT5e communication cable for Honeywell control networks.

51306271-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51306305-300

CalibratorHoneywell

Industrial Testing Module

Honeywell 51306305-300 is an industrial testing module for Honeywell process control systems. 0.02 accuracy grade, IP65, CT4 explosion protection, M12 interface.

51306356-100

Shielded Communication Cable

Honeywell 51306356-100 is a shielded communication cable for industrial environments, with EMI/RFI protection and an abrasion- and chemical-resistant jacket. Operating range -40C to +80C.

51306505-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51306519-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51306652-100

ControllerHoneywell

PLC Control Module

Honeywell 51306652-100 is a PLC control module in the Honeywell C300 controller series. 16 digital inputs, 16 digital outputs, Modbus / Ethernet/IP / OPC-UA, 15 W.

51306673-100

PLC CPU ModuleHoneywell

Enhanced Processor Node Interface Module

Honeywell 51306673-100 is an Enhanced Processor Node Interface (EPNI / ENB) card for Honeywell Experion PKS and other Honeywell control systems, facilitating communication between the processor and field devices.

51306673-200

PLC CPU ModuleHoneywell

Enhanced Processor Node Interface Module

Honeywell 51306673-200 is an Enhanced Processor Node Interface (EPNI / ENB) card for Honeywell Experion PKS and other Honeywell control systems.

51306731-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51307032-175

PONT01 PowerNet Module

Honeywell 51307032-175 is a Honeywell control system module (PONT01).

51307032-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51307038-100

Power SupplyHoneywell

Power Control Module

Honeywell 51307038-100 (BU-PWCNTA-CN) is a power control / supply module for Honeywell Experion PKS and TDC systems, providing power regulation and distribution for controllers and I/O modules. 24 VDC nominal input, rack-mounted.

51307039-100

Circuit BreakerHoneywell

Breaker Box Module Assembly

Honeywell 51307039-100 is a breaker box module assembly for Honeywell industrial control systems. 24 VDC, CE/TUV/UL508/CSA approvals.

51307106-175

Power Conditioning PWA Board

Honeywell 51307106-175 is a high-performance I/O Link interface processor (HPMM interface to its I/O subsystem) with reverse polarity protection, engineering unit conversion, and redundant I/O Link. 16 channels.

51307149-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51307186-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51307186-275

Header Board

Honeywell 51307186-275 (Rev. E) is a logic interface / header board for industrial control systems, certified for hazardous (Zone 2) environments. 94V-0 flame rating, paired with PWB 51307185-100.

51307190-150

HPM I/O Link PC Board

Honeywell 51307190-150 is an HPM I/O Link PC board (EHPM communication module) facilitating data transfer between Honeywell field I/O modules (IOPs) and the control system. CE/TUV/UL approved.

51307616-176

DC-TFB402 Field Termination Board

Honeywell 51307616-176 (DC-TFB402) is a field termination board for Honeywell control systems.

51307687-176

PM AI High-Level Analog Input Motherboard

Honeywell 51307687-176 is a High-Level Analog Input (HLAI) motherboard interfacing analog input modules in Honeywell DCS systems. Up to 16 analog input channels, single-ended or differential. Compatible modules MC-PAIH03, MU-PAIH03.

51308012-100

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51308016-106

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51308019-100

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51308020-200

Monitor AC Power Cable

Honeywell 51308020-200 is a monitor AC power cable for Honeywell control system displays.

51308035-100

Communication ModuleHoneywell

Control Network Interface Module

Honeywell TDC 3000 / TPS Control Network Interface (CNI) board, providing network interface for the process control network. Used in legacy Honeywell DCS systems.

51308047-100

Universal Station Touchscreen Interface Cable

Honeywell 51308047-100 is a touchscreen interface cable for Universal Station operator consoles in TDC 3000 systems. Shielded industrial communication cable with factory-terminated connectors for stable signal transmission.

51308051-200

Enclosure DC Power Cable

Honeywell 51308051-200 is a DC power cable for industrial control panels and distributed control systems, providing consistent voltage transmission for control equipment in automation enclosures.

51308052-200

ControllerHoneywell

Industrial Control Module

Honeywell 51308052-200 industrial control module operating at 24V DC, supporting MODBUS RTU, PROFIBUS and EtherNet/IP, with 16 digital inputs and 8 digital outputs. Operating temperature -20 to +70 C, IP20 enclosure.

51308058-100

Keyboard Interface Cable

Honeywell 51308058-100 is a keyboard interface cable for operator workstations in TDC3000 distributed control systems, rated 24V DC with EMI/RFI shielding and proprietary Honeywell connectors.

51308071-200

PLC ModuleHoneywell

Industrial PLC Control Module

Honeywell 51308071-200 is a PLC control and system interface module for TDC 3000 and Universal Station platforms, providing control signal processing with EMI/RFI-protected plug-in construction for Honeywell backplane assemblies.

51308092-200

Power CableHoneywell

TDC 3000X AC Power Cord

Honeywell 51308092-200 is an industrial AC power cable for XC3000 and TDC 3000X control systems. Rated 250V AC, 10A, 2 metres long, providing stable power delivery to Honeywell modules.

51308093-300

Power CableHoneywell

TDC 3000 AC Power Entry Panel Cable

Honeywell 51308093-300 is an AC power entry panel cable for TDC 3000 control systems. Rated 250V AC, 10A, 89 cm (35 in) long, for secure power connectivity between system components and external power sources.

51308093-600

Analog Input Module

Honeywell 51308093-600 analog input module for TDC3000-series control systems.

51308094-300

Power CableHoneywell

TDC 3000 AC Power Cord

Honeywell 51308094-300 is an AC power cord for TDC 3000 industrial control systems. Rated 250V AC, 15A, 2 metres long, for reliable power delivery to control components.

51308095-100

Communication ModuleHoneywell

I/O Interface Module

Honeywell 51308095-100 is an I/O interface/expansion module for TDC3000 distributed control systems, supporting analog and digital I/O and enabling field-device signal integration. Dimensions 216 x 160 x 30 mm.

51308097-100

I/O ModuleHoneywell

Input/Output Module

Honeywell 51308097-100 input/output module for the TDC 3000 distributed control system, providing signal interface between the controller and field devices.