The Bently Nevada 792414506-04 is a vibration transmitter that converts machine vibration into a 4-20 mA electrical signal for monitoring systems. 24 VDC input, 100 mV/g sensitivity, frequency range 10 Hz to 1 kHz, stainless steel housing.

Contact for wholesale

79482-01

Thrust Position MonitorBently Nevada

3300/20 Dual Thrust Position Monitor

The Bently Nevada 79482-01 Dual Thrust Position Monitor is part of the 3300/20 series, monitoring axial shaft position across two independent channels and providing early warning of thrust bearing issues. 24 Vdc transducer power supply, frequency response 0 to 10 kHz.

Contact for wholesale

794833

Junction BoxHDE

Marine Watertight Junction Box J-2M

HDE J-2M marine watertight junction box. External size 143x158x62mm, 0-250V, 0-20A, synthetic resin, standard JIS F8832/8833, cable OD 14-16mm.

Contact for wholesale

794833

Motion Control ModuleKings

Steering Gear Amplifier

Kings KS73A steering gear amplifier (P/N 794833). Adjusts the controller and controls the rudder actuating cylinder for vessel steering, with four selectable channels and switchable autopilot (AP) mode for external auto-navigation devices. DC24V.

Contact for wholesale

79492-01

Temperature ControllerBently Nevada

Six-Channel Temperature Monitor

The Bently Nevada 79492-01 is a six-channel temperature monitor. Temperature range -200 C to +850 C, accuracy +/-0.05% of reading, 24 VDC, with RS232/RS485/Ethernet interfaces. Made in USA.

Contact for wholesale

795-004-001

Communication ModuleMorley

RS-485 Communication Module

Morley RS-485 communication module / industrialized dial and leased-line modem for point-to-point communication between Morley-IAS ZX range fire alarm control panels and peripheral equipment.

Contact for wholesale

795-005

Communication ModuleMorley

RS-232 Communication Module

Morley 795-005 RS-232 communication module kit for the ZX range of fire alarm control panels; supports single point-to-point communication between ZX series panels.

Contact for wholesale

795-014

Relay Output ModuleMorley

4-Way Programmable Output Relay Card

Morley 4-way programmable relay card, a compact remote I/O device for the ZX series intelligent multi-protocol fire alarm control panels. Provides four individually programmable relay outputs. Operating voltage 24-28 Vdc.

Contact for wholesale

795-015

Sounder BeaconMorley

4-Way Programmable Sounder Module

Honeywell Morley 795-015 4-way sounder module; four supervised monitored 24 Vdc polarity-reversal sounder outputs on a single PCB, up to 1 A each (3 A total). RS-485 communication.

Contact for wholesale

795-029

Analog Input ModuleMorley

8-Way Programmable Input Module

Morley 8-way programmable input card, a compact remote I/O device for the ZX series intelligent multi-protocol fire alarm control panels. Provides 8 programmable inputs with individual or community addressing.

Contact for wholesale

795-057

Communication ModuleMorley

MODBUS Interface Module

Honeywell Morley MODBUS interface module; connects to the RS-485 peripheral bus of the ZX series fire alarm control panels for panel interrogation by a Modbus control system. 24 Vdc, 120 mA, IP67 enclosure.

Contact for wholesale

795-058-105

Signal ConditionerMorley

Hochiki ESP Protocol Loop Driver Card

Morley Hochiki ESP Protocol loop driver card for the ZX range of analogue addressable fire alarm panels (ZX1Se, ZX2Se, ZX5Se).

Contact for wholesale

795-068-100

Signal ConditionerMorley

System Sensor Protocol Loop Driver Card

Morley System Sensor Protocol loop driver card (460 mA) for ZX addressable fire alarm panels, to EN54 Parts 2 and 4.

Contact for wholesale

795-077-020

Display ModuleMorley

Additional 20 Zone LED Card

Morley 20-zone LED card for the ZX range of intelligent control panels; increases total zone LEDs to 40. Supplied with PCB, ribbon cable and fixings.

Contact for wholesale

795-102

Display ModuleMorley

40 Zone LED Card

Morley 795-102 40-zone LED card for the Morley Dimension range of control panels. Supplied with PCB, ribbon cable, zone number label and fixings.

Contact for wholesale

795-109-001

Carrier / Mounting BaseMorley

DXc Region 1, 1 Loop Base Card

Morley DXc region 1, single-loop base card.

Contact for wholesale

795-110-002

Carrier / Mounting BaseMorley

DXc Region 2, 2 Loop Base Card

Morley DXc region 2, two-loop base card.

Contact for wholesale

795-111

Expansion ModuleMorley

DXc 2 Loop Expansion Card

Morley DXc 2-loop expansion card for the DX Connexion fire alarm control panel range.

Contact for wholesale

795-119

Mounting BracketMorley

DXc1 Rack Mount Bracket

Morley rack mount bracket designed for the DXc1 addressable control panel, allowing DXc panels to be mounted in a standard 19-inch rack.

Contact for wholesale

795-120

Mounting BracketMorley

DXc2/4 Rack Mount Bracket

Morley rack mount bracket designed for the DXc2/4 addressable control panel, allowing DXc panels to be mounted in a standard 19-inch rack.

Contact for wholesale

795-121

EnclosureMorley

DXc Extension Box

Morley DXc extension box; increases enclosure size of a DXc1, DXc2 or DXc4 control panel to accommodate larger batteries, relays or other equipment. 263 x 390 x 147 mm. Supplied without covers.

Contact for wholesale

795-122

Communication ModuleMorley

DXc RS232 Card

Morley DXc RS232 card; allows connection of a serial device (BMS system or Morley Visuleyez range) to the panel. For use with DXc1-M (714-001-214) and DXc2-M (714-001-224) only.

Contact for wholesale

795-124

Display ModuleMorley

80 Zone LED Card

Morley 80-zone LED card for the DXc range of fire alarm control panels; includes PCB, ribbon cable, zone number labels and fixings. Fits the lower half of the DXc panel front door.

Contact for wholesale

795-132

I/O ModuleMorley

DXc I/O Card

Morley DXc I/O card for EN54-13 compliant sounder circuits, Fire Routing, Fault Routing and Fire Protection interfaces. For use with DXc1-M (714-001-214) and DXc2-M (714-001-224) only.

Contact for wholesale

79512-01

Temperature Input ModuleBently Nevada

3500 Temperature Monitor Module

The Bently Nevada 79512-01 Temperature Monitor is part of the 3500 series protection system, providing continuous monitoring of temperature parameters in rotating machinery. Supports RTD and thermocouple inputs, rack-mounted, with configurable over-temperature alarm and trip functions.

Contact for wholesale

79512-03

Seismic TransmitterBently Nevada

Proximitor / Seismic Monitor

The Bently Nevada 79512-03 is a four-channel monitor accepting inputs from proximity and seismic transducers, conditioning signals for vibration and position measurement and comparing against programmable alarm thresholds. IP67 rated.

Contact for wholesale

79532-01

Machinery Protection ModuleBently Nevada

Keyphasor System Monitor

The Bently Nevada 79532-01 system monitor provides power and signal conditioning for four Keyphasor transducers, essential for monitoring and protecting rotating machinery. Front-panel BNC connectors, local and remote alarm reset.

Contact for wholesale

79550

Level SwitchDeckma Hamburg

OMD-24 Bilge Alarm Unit

Deckma OMD-24 bilge alarm unit designed for use with 15 ppm oil-water separator units, exceeding IMO MEPC.107(49) requirements for 15 ppm bilge alarms. Supplied with 2 works-adjusted alarms at 15 ppm.

Contact for wholesale

79748-01

Temperature ControllerBently Nevada

3300 Six-Channel Temperature Monitor Assembly

The Bently Nevada 79748-01 is a six-channel temperature monitor assembly board for the 3300 system, providing temperature monitoring across six channels for machinery protection. Made in USA.

Contact for wholesale

7AF101.7

Analog I/O ModuleB&R

Analog Module

B&R 7AF101.7 System 2005 analog module.

Contact for wholesale

7AI294.7

Analog Input ModuleB&R

Analog Input Module

B&R 7AI294.7 System 2005 analog input module.

Contact for wholesale

7AI354.70

Analog Input ModuleB&R

Analog Input Module

B&R 7AI354.70 System 2005 analog input module.

Contact for wholesale

7AI774.70

Analog Input ModuleB&R

Analog Input Module

B&R 7AI774.70 System 2005 analog input module.

Contact for wholesale

7AO352.70

Analog Output ModuleB&R

Analog Output Module

B&R 7AO352.70 System 2005 analog output module.

Contact for wholesale

7BP704.0

Chassis / RackB&R

Base Plate

B&R 7BP704.0 System 2005 base plate (backplane rack).

Contact for wholesale

7BP705.0

Chassis / RackB&R

Base Plate

B&R 7BP705.0 System 2005 base plate (backplane rack).

Contact for wholesale

7C-0527

Starter MotorCaterpillar

Starting Motor

Starting motor group for the Caterpillar 3508 engine. OEM part number 7C-0527.

CAT 3508Contact for wholesale

7C-2049

CamshaftCaterpillar

Camshaft

Camshaft for the Caterpillar G3516 gas engine. OEM part number 7C-2049.

CAT G3516Contact for wholesale

7C-3039

Oil CoolerCaterpillar

Oil Cooler Core

Oil cooler core assembly for the Caterpillar 980G wheel loader. OEM part number 7C-3039.

CAT 980GContact for wholesale

7C-3372

Starter MotorCaterpillar

Air Starter Motor

Vane-type air starter motor with 12 pinion teeth and SAE 3 mounting flange for Caterpillar 3508, 3512, and 3516 series large diesel engines. Uses compressed air to crank the engine.

Contact for wholesale

7C-3385

AftercoolerCaterpillar

Aftercooler Core

Aftercooler core assembly for the Caterpillar D9R bulldozer. OEM part number 7C-3385.

CAT D9RContact for wholesale

7C-3910

HoseCaterpillar

Hose

Hose for the Caterpillar 773E off-highway truck. OEM part number 7C-3910.

CAT 773EContact for wholesale

PreviousPage 532 / 955Next