Parts catalogue

Basic Termination Panel

Triconex 9753-110 (1057680000) basic termination panel for pulse input and pulse totalizer input modules. 16 IN+/IN- terminals; two panels required per 32-point pulse totalizer module.

975750000

CableSchneider Electric

Modicon RG-6 Quad-Shield Coaxial Cable

Modicon RG-6 quad-shield coaxial cable from Schneider Electric.

9760-210

Field Termination Panel

Triconex 9760-210 field termination panel for Tricon safety systems.

9761-210

Current Input Termination Panel

Triconex 9761-210 termination panel compatible with 0-5 VDC, -5 to +5 VDC analog input and HART analog input interface modules. 16 power output terminals and 16 current input terminals, each current-limited with a 180 ohm series resistor.

Contact for wholesale

976R

Position SwitchMagnescale

Magnetic Scale Sensor

Magnescale 976R magnetic scale / measuring sensor used on rolling mills.

9771-210

Analog Input ModuleTriconex

Analog Input Terminal Board

Triconex 9771-210 analog input terminal board for the Tricon 3600 series safety instrumented system. Input range 100-240 V AC/DC, 24 V DC output, max 5 A, operating range -25°C to +60°C.

9771-210-7760059032

Current Input Termination Panel

Triconex 9771-210 (7760059032) current input termination panel for the Triconex Triplex SIS. Current input 0-5 VDC user-configurable, 16 points, 16 power output and 16 current input terminals with 180 ohm series resistors; TUV SIL 3 certified.

9771-220

Analog Input ModuleTriconex

Analog Input Terminal Board

Triconex 9771-220 analog input terminal board for Tricon safety systems.

9780-G

TransmitterMobrey

Delta Mobrey 9780 Pole-Mounted Hydrostatic Level Transmitter

Delta Mobrey 9780 pole-mounted two-wire 24Vdc loop-powered hydrostatic level transmitter, 4-20mA, accuracy +/-0.1% of calibrated span, ranges up to 200m H2O with 10:1 rangeability. Ceramic capacitive sensor, fully submersible IP68/NEMA 6P, reverse polarity protection, marine version available.

9790MS1A1PM003NAAC1

TransmitterMobrey

Delta Mobrey Hydrostatic Level Transmitter

Delta Mobrey hydrostatic level transmitter, factory sealed and tested for submersed duty. 4-20mA output proportional to level, flush-mounted ceramic sensor, good long-term stability, for industrial or marine applications.

9802

Field Terminations Module

Triconex 9802 field terminations module compatible with Tricon v9 systems.

9808

Motion Control ModuleGE Fanuc

Whedco Motion Control Module

GE Fanuc (Whedco) motion control module, part 9808 (remanufactured).

9832

Communication ModuleTriconex

Communication Module Interface (TCMI)

Triconex 9832 communication module interface between a Fault Tolerant Ethernet (FTE) EUCN and the Triconex TRICON Safety Manager System. Redundant design for high plant availability.

9832-KFF-REM-RAA-9000

Digital Input ModuleICS Triplex

Trusted I/O Module

ICS Triplex 9832-series Trusted/Regent digital input module, 18-32 VDC, for triple-redundant safety control systems.

9852

Analog Input ModuleTriconex

2-Channel Universal Input Module

Triconex (Invensys/ICS Triplex) 9852 2-channel universal input module for TriStation/Tricon safety systems; TUV-certified SIL3 universal safety I/O, 24 VDC, supporting supervised digital/analog I/O with optional HART.

985210211

PLC CPU ModuleHIMA

HIMax X-CPU 01 Safety-Related Controller

The HIMA HIMax X-CPU 01 (985210211) is a safety-related controller CPU module for the HIMax safety system.

9853-610

Basic Termination Panel

Triconex 9853-610 basic current-output termination panel. 8 current output points for HART analog output (2870H) and 4-20 mA commoned-return DC-coupled TMR (3805E/H) modules. 8 current output and 8 return terminals, 24 VDC.

9857

Solenoid ValveFesto

MFH Tiger Classic Solenoid Valve

Festo MFH-3-1/2 Tiger Classic pneumatic solenoid valve, order number 9857.

9863-710

Termination Panel

Triconex 9863-710 termination panel for Tricon safety systems.

99-80266-01

Control Processor ModuleASML

Resist Coater Station Controller CPU Board

SVG (Silicon Valley Group, now ASML) 99-80266-01 station controller CPU PCB card used in the SVG 90S resist coater / stack-bake station of DUV lithography tracks.

990-04-50-01-00

990 Two-Wire Vibration Transmitter

Bently Nevada 990 Series two-wire vibration transmitter. Full-scale 0-4 mils pp (0-100 um pp), 5.0 m system length, 35 mm DIN rail mounting; accepts one 3300 NSv proximity probe; +12 to +35 VDC loop powered, 4-20 mA output. Made in USA.

990-04-50-01-05

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-4 mils pp (0-100 um pp), 5.0 m system length, 35 mm DIN rail mounting; agency approval CSA Division 2, ATEX Zone 0/2 and ABS maritime. Made in USA.

990-04-50-01-CN

990 2-Wire Vibration Transmitter

Bently Nevada 990 Series two-wire vibration transmitter (China/NEPSI variant). Measurement range 0 to 100 um peak-to-peak, 5.0 m system length, 35 mm DIN rail mounting, ATEX/IECEx and NEPSI hazardous-area marking; integrated Proximitor sensor.

990-04-50-02-00

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 5.0 m system length, bulkhead-screw mounting; accepts one 3300 NSv proximity probe; +12 to +35 VDC. Made in USA.

990-04-50-02-CN

990 Vibration Transmitter

Bently Nevada 990 Series two-wire vibration transmitter (China variant, configuration 04-50-02).

990-04-70-01-00

990 2-Wire Vibration Transmitter

Bently Nevada 990 Series two-wire vibration transmitter. Full-scale 0-4 mils pp (0-100 um pp), 7.0 m system length, 35 mm DIN rail mounting; accepts one 3300 NSv proximity probe; +12 to +35 VDC. Made in USA.

990-04-70-01-05

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-4 mils pp (0-100 um pp), 7.0 m system length, 35 mm DIN rail mounting; agency approval CSA Division 2, ATEX Zone 0/2 and ABS maritime. Made in USA.

990-04-70-02-00

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-4 mils pp (0-100 um pp), 7.0 m system length, bulkhead-screw mounting. Probe tip polyphenylene sulfide, AISI 303/304 SST case, 75 ohm coaxial FEP probe cable. Made in USA.

990-04-70-02-05

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-4 mils pp (0-100 um pp), 7.0 m system length, bulkhead-screw mounting; agency approval CSA Division 2, ATEX Zone 0/2 and ABS maritime. Made in USA.

990-04-70-03-00

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-4 mils pp (0-100 um pp), 7.0 m system length, DIN clips and screws mounting; accepts one 3300 NSv proximity probe; +12 to +35 VDC. Made in USA.

990-04-XX-01

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter (full-scale option 04, mounting option 01; XX = system length to be specified).

990-04-XX-01-00

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter (full-scale 0-4 mils pp). Loop-powered two-wire device; accepts 3300 NSv proximity probe and extension cable; 4-20 mA output proportional to vibration amplitude.

990-04-XX-01-00 MOD 147202-01

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter, factory modification MOD 147202-01 (full-scale 0-4 mils pp, mounting option 01).

990-04-XX-01-01 MOD 165335-01

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter, factory modification MOD 165335-01 (full-scale 0-4 mils pp, mounting option 01, agency option 01).

990-04-XX-01-05

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter (full-scale 0-4 mils pp, agency option 05) for monitoring pumps, compressors and turbines. Converts proximity-probe vibration measurements into a 4-20 mA signal.

990-04-XX-03-00

990 2-Wire Vibration Transmitter

Bently Nevada 990 Series two-wire vibration transmitter. Current loop range 0-10 mils pp (4-20 mA), proximity range 10-65 mils, DIN clips and screws mounting; integrated Proximitor sensor.

990-05-50-01-00

990 2-Wire Vibration Transmitter

Bently Nevada 990 Series two-wire vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 5.0 m system length, 35 mm DIN rail mounting; minimum target 9.5 mm diameter. Made in USA.

990-05-50-01-01

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 5.0 m system length, 35 mm DIN rail mounting; agency approval CSA Division 2. Made in USA.

990-05-50-01-05

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 5.0 m system length, 35 mm DIN rail mounting; agency approval CSA Division 2, ATEX Zone 0/2 and ABS maritime. Made in USA.

990-05-50-01-CN

990 Vibration Transmitter

Bently Nevada 990 Series two-wire vibration transmitter (China variant) for OEM centrifugal air compressors, pumps, motors and fans. Full-scale 0-5 mils pp, 5.0 m system length, 35 mm DIN rail mounting; 4-20 mA proportional output; integrated Proximitor sensor.

990-05-50-02-00

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 5.0 m system length, bulkhead-screw mounting; agency approval not required. Made in USA.

990-05-50-02-01

990 2-Wire Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 5.0 m system length, bulkhead-screw mounting; agency approval CSA Division 2. Made in USA.

990-05-50-03-00

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 5.0 m system length, DIN clips and screws mounting; agency approval not required. Made in USA.

990-05-50-03-05

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 5.0 m system length, DIN clips and screws mounting; agency approval CSA Division 2, ATEX Zone 0/2 and ABS maritime. Provides 4-20 mA signal proportional to relative vibration.

990-05-70-01-00

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 7.0 m system length, 35 mm DIN rail mounting; integrated Proximitor sensor working with the 3300 NSv proximity probe.

990-05-70-01-01

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 7.0 m system length, 35 mm DIN rail mounting; agency approval CSA Division 2. Made in USA.

990-05-70-01-05

990 Vibration Transmitter

Bently Nevada 990 Series vibration transmitter. Full-scale 0-5 mils pp (0-125 um pp), 7.0 m system length, 35 mm DIN rail mounting; agency approval CSA Division 2, ATEX Zone 0/2 and ABS maritime. Made in USA.

990-05-70-01-CN

990 Vibration Transmitter

Bently Nevada 990 Series two-wire vibration transmitter (China variant, full-scale 0-5 mils pp, 7.0 m system length).