Parts catalogue

Exhaust System Seal Kit

Liebherr OEM seal kit for exhaust system joints or connections on Liebherr earthmoving equipment.

10120993

Turbocharger Seal Kit

Seal kit for the engine turbocharger on Liebherr earthmoving equipment, containing gaskets and seals for turbo overhaul.

10121003

Output Shaft Seal Kit

Liebherr OEM seal kit for the output shaft of a Liebherr transmission or final drive on earthmoving equipment.

10121183

Fuel Line Seal Kit

Liebherr OEM seal kit for fuel line connections in Liebherr earthmoving equipment fuel systems.

10121346

Crankshaft Seal Repair Kit

Liebherr OEM crankshaft seal repair kit for front or rear crankshaft seals on Liebherr earthmoving equipment engines.

10121558

Swivel Joint Seal Kit

Repair seal kit for the hydraulic centre swivel joint on Liebherr crawler earthmoving equipment.

10122907

BearingLiebherr

Connecting Rod Bearing

Connecting rod big-end (crankpin) bearing for Liebherr D9508 and D9512 diesel engines, available in standard and oversize.

Caterpillar 777CContact for wholesale

1012565451

Connecting RodCaterpillar

Connecting Rod

Caterpillar OEM connecting rod for the engine of the Caterpillar 777C off-highway dump truck.

10128593

BearingLiebherr

Crankshaft Main Bearing

Crankshaft main bearing (0.50 oversize) for Liebherr D934 diesel engine, supporting the crankshaft in the engine block.

10133060

Regulator ValveLiebherr

Hydraulic Regulating Valve

Hydraulic regulating valve used in the hydraulic control system of Liebherr bulldozers and earthmoving equipment.

10141467

Water PumpLiebherr

Water Pump

Water pump assembly with fastening hardware for the Liebherr D9508 engine, circulating coolant through the engine cooling system.

Hitachi ZX360-5GContact for wholesale

1014184

Pump HousingHitachi

Pump Housing

Hydraulic pump housing (casing) for the HPV145 main hydraulic pump fitted to Hitachi ZX330 and ZX360 series excavators.

10142476

Track ChainLiebherr

Track Link

Track chain connecting link for the undercarriage system of Liebherr crawler equipment including dozers and excavators.

Liebherr 850 D2.1Contact for wholesale

10147678

Fuel InjectorLiebherr

Fuel Injector

Fuel injector for the Liebherr 850 D2.1 engine, delivering pressurized fuel into the combustion chamber.

10165819

PlateSany

Structural Plate

Structural plate for the Sany SRSC45H1 45-tonne container reach stacker, used in the frame or chassis assembly.

Sany SRSC45H1Contact for wholesale

1017-3774R16-503-26606-41

Control BoardKollmorgen

Control Board

Recognized manufacturer reference available for industrial supply enquiry.

Caterpillar 992CContact for wholesale

1017788

Valve LifterCaterpillar

Valve Lifter

OEM valve lifter (also referenced as 101-7788) for Caterpillar 992C wheel loader and other CAT equipment using compatible engine configurations.

102-0297

TurbochargerCaterpillar

Turbocharger

Turbocharger for the Caterpillar 3512 engine, forced-induction component increasing air intake for improved combustion efficiency.

CAT 345BContact for wholesale

102-2240

SensorCaterpillar

Temperature Sensor

Temperature sensor group for the Caterpillar 345B excavator, measuring coolant or hydraulic oil temperature for engine management.

102-3596

FlywheelCaterpillar

Flywheel

Engine flywheel for the Caterpillar 330D excavator, maintaining engine rotational inertia and providing the ring gear interface for the starter motor.

CAT 330DContact for wholesale

102-6379

Swing GearboxCaterpillar

Swing Gearbox

Hydraulic swing reduction gearbox for the Caterpillar E307E and E308 mini excavators, reducing swing motor speed to deliver swing torque to the upper structure.

CAT E307E+1Contact for wholesale

102-6520

GearCaterpillar

Drive Gear

Drive gear for Caterpillar 311 excavator, part of the engine gear train or drivetrain assembly.

CAT 311Contact for wholesale

102-8671

Clutch DiscCaterpillar

Friction Disc

Friction disc for the Caterpillar 770G off-highway truck, used in the transmission or braking system as a wear component.

CAT 770GContact for wholesale

102-9029

SensorCaterpillar

Speed Sensor

Engine speed sensor group for Caterpillar engines and equipment, measuring crankshaft or camshaft rotational speed for engine management systems.

10201/1/1

Digital Output ModuleHoneywell

FSC Fail-Safe Digital Output Module

Honeywell FSC (Fail Safe Controller) fail-safe digital output module, part number 10201/1/1.

10201/2/1

Digital Output ModuleHoneywell

FSC Fail-Safe Digital Output Module

Honeywell FSC (Fail Safe Controller) fail-safe digital output module, part number 10201/2/1.

1020296

TurbochargerCaterpillar

Turbocharger

Turbocharger for Caterpillar 3412 V12 diesel engine (Garrett TV9215 / part 465965-5002S), used in marine, industrial and heavy equipment applications.

102044-00-18-10-02

Proximity ProbeBently Nevada

Proximity Probe

Bently Nevada 102044-00-18-10-02 proximity probe, part of the 3300 XL 8 mm series. Operates -17.5 to -26 VDC, output resistance 50 ohm, operating range -51 to +177 C, IP67 rated, panel mount.

102044-00-28-10-02

Programmable Logic ControllerBently Nevada

Overspeed Protection Controller

Bently Nevada 102044-00-28-10-02 programmable controller for machinery overspeed protection. Input frequency 0.0167 Hz to 20 kHz, max 99,999 RPM, redundant power configuration, meets API 670 and API 612.

102045-040-00

Extension CableBently Nevada

Proximity Probe Extension Cable

Bently Nevada 102045-040-00 proximity probe extension cable for the 3300 XL system.

102045-040-01

Extension CableBently Nevada

Proximity Sensor Cable

Bently Nevada 102045-040-01 armored proximity sensor cable for the 3300XL 8mm vibration monitoring system. Stainless steel housing, 3-socket transducer plug, 4 m length, impedance 50-60 ohm.

102045-080-00-05

Extension CableBently Nevada

Proximity Probe Extension Cable

Bently Nevada 102045-080-00-05 extension cable for the 3300 XL Proximity Transducer System. 8 m length, 4-pin miniature coaxial connector, tinned copper conductor, braided EMI shield, operating range -40 to +85 C.

102046-50

Proximity TransducerBently Nevada

Proximitor Sensor

Bently Nevada 102046-50 Proximitor sensor for non-contact object detection. 24 VDC nominal, approx. 0.27 kg, built for harsh industrial environments.

10205/1/1

Analog Output ModuleHoneywell

FSC Fail-Safe Analog Output Module

Honeywell 10205/1/1 fail-safe analog output module with two independent galvanically isolated 0(4)-20 mA channels, 12-bit D/A resolution, built-in diagnostics and de-energization. For high-integrity safety systems.

10205/2/1

Analog Output ModuleHoneywell

FSC Fail-Safe Analog Output Module

Honeywell 10205/2/1 (type 11600) fail-safe analog output module for FSC systems, two galvanically isolated 0-20 mA / 4-20 mA channels, 12-bit D/A converter. CE/TUV approvals.

10206/2/1

Analog Output ModuleHoneywell

FSC Analog Output Module

Honeywell 10206/2/1 module converting digital control signals into analog outputs, 12 channels rated 24 VDC / 550 mA, loads up to 13 W, with suppression diodes for inductive loads. Drives actuators and field devices in process control systems.

1020600305

VMP-530 Main Station

Designed for use with ACM exchanges and for wall mounting. Handsfree open conversation, or private when used with handset VMP-211 or VMP-250. For use with an external loudspeaker. Built-in electret microphone for clear sound, keyboard with large digits, C-key for cancelling calls, M-key for manual switching of speech direction (simplex), voice-operated duplex speech.

1020600315

VMP-503 Main Station with Built-in Loudspeaker

Designed for use with ACM exchanges and for wall mounting. Handsfree open conversation, or private when used with Handset VMP-211 or VMP-250. Built-in loudspeaker and built-in electret microphone for clear sound. Keyboard with large digits and C-key for cancelling calls.

1020600700

TelephoneZenitel

VMP-250 Wall-Mounted Waterproof Handset

Waterproof heavy-duty industrial wall-mounted handset for use on industrial master stations. The built-in loudspeaker is disconnected when lifting the handset. Includes push-to-talk key. IP-65, usage temperature -40 C to +55 C, storage -40 C to +70 C.

1020600771

MicrophoneZenitel

VSP-36-PEL-A Boom Microphone

Boom microphone for VSP main stations. Flying leads/ferrules prepared for screw terminals. 20.5 mm dynamic noise-cancelling microphone, 240 ohm +/-30%, sensitivity -57 dB.

1020600776

MicrophoneZenitel

P-MT7-A Headset with Boom Mic and 10 m Cable

The P-MT7-A headset brings hearing protection and communication in noisy environments to a new level with redesigned speakers and microphone. Dual-cup design provides excellent noise attenuation. For analog telephone and talk-back systems.

1020600787

MicrophoneZenitel

VMP-36-PEL-Ad Headset with Boom Mic, Headband and 10 m Cable

The VMP-36-PEL-A headset brings hearing protection and communication in noisy environments to a new level with redesigned speakers and microphone. Dual-cup design provides excellent noise attenuation. For VMP stations. Flying leads/ferrules prepared for screw terminals, 20.5 mm microphone, 240 ohm.

1020600931

VSP-211-L Batteryless Telephone Main Station, 12-Way

VSP-211-L main station for the 12-way batteryless telephone system. Screw terminal connections, black, IP-44 (in console), dimensions 238 x 205 x 137 mm, panel cut-out 205 x 105 mm, weight 1.30 kg.

1020600935

VSP-213-L Main Station, Panel-Mounted Indoor Unit

The VSP-213-L main station is part of the 12-way batteryless telephone system, comprising up to 12 main stations with a selector switch for selective calling between connected stations. Multiple mounting options (flush, wall, or desk) and a 12-position selector switch for efficient communication.

1020600943

VSP-223-L Batteryless Telephone Main Station, 12-Way

The VSP-223-L Main Station enhances the 12-Way Batteryless Telephone System with features tailored for noisy areas, suitable for control rooms, steering gear, engine and thruster rooms. Ensures clear, uninterrupted communication even during a full blackout of the vessel's power.

1020600992

Junction BoxZenitel

IRR-3 Relay Box

Multi-purpose relay unit rated for 24VDC or 220V AC visible and/or audible signal units. 24VDC operation, local mute function for SPA Public Address System, wall mounting, suitable for noisy areas. Screw terminals, max switching current 8A, flame-retardant plastic housing, IP-66, 3x PG-11 cable inlet.

1020600993

Junction BoxZenitel

IRR-4 Output Relay Box

The IRR-4 activates an extra signal device, such as a rotary or stroboscopic light, in noisy areas. Connect a potential-free normally-open signal to the control input, a power supply to the correct input, and the signal device to the output; when the control input shorts, the output engages the power. ABS housing.

1020603700

VMP-430 Main Station for Flush Mounting

Designed for use with ACM exchanges and made for flush mounting. Fully equipped main station with free access to all extensions and features. Handsfree open conversation or private with optional handset VMP-221. Built-in loudspeaker with volume control and built-in electret microphone. Keyboard with large illuminated dimmable digits.