Parts catalogue

Synpol Printed Circuit Board

ABB CMA36 printed circuit board for Synpol drive and control systems, providing signal processing and system interfacing.

CMA39-B

Synpol Voltage Insert Card

ABB Synpol CMA39-B voltage insert card for GVT 360 protection relays. Converts high-voltage AC signals to low-voltage relay inputs. Rated 450V AC, max 10A.

CMA51

Synpol PCB Card

ABB CMA51 Synpol PCB card for industrial automation and control systems.

CMA51 GVT3605976

Synpol PCB Card CMA51

ABB CMA51 (GVT3605976) Synpol PCB card for industrial automation, process control and manufacturing systems; signal processing and control interface.

CMA52

Synpol PCB Module

ABB CMA52 (GVT3605977) PCB control module for industrial automation. 8 analog inputs (0-10V/4-20mA), 12 digital inputs, RS485 Modbus RTU, 24V DC supply.

CMAC105

Machinery Protection ModuleSKF

Condition Monitoring Accessory

SKF CMAC105 condition monitoring accessory.

CMC70

ControllerABB

Multifunction Controller Module

ABB CMC70 multifunction controller module with analog and digital I/O, Modbus and Profibus support. Performs PID control, logic operations and data acquisition.

CMIB-11C 3AUA0000041488

CMIB-11C Main Circuit Interface Board

ABB CMIB-11C main circuit interface board for drives; net weight 0.8 kg; order code 3AUA0000041488.

CMIB-11C-3AUA0000041488

Interface ModuleABB

CMIB Interface Board

ABB CMIB-11C interface board, catalog 3AUA0000041488.

CMM11

Machinery Protection ModuleABB

Condition Monitoring Module

ABB CMM11 condition monitoring module from the Symphony Plus HR series, for turbine control and rotating equipment. High-speed data logging and vibration analysis, Ethernet interface.

CMMTU02

Termination UnitABB

Condition Monitoring Termination Unit

ABB CMMTU02 termination unit for the CMM11 condition monitoring module.

CMON4108

Vibration MonitorSKF

Condition Monitoring Unit

SKF CMON4108 condition monitoring device.

CMRB-11C 3AUA0000054682

I/O ModuleABB

I/O Board CMRB-11C

ABB CMRB-11C I/O board (spare part).

CMRB-11C-3AUA0000054682

Drive Control BoardABB

CMRB Resistor Braking Board

ABB CMRB-11C resistor braking board, catalog 3AUA0000054682.

CMT1000

Field CommunicatorABB

Commissioning And Maintenance Tool

ABB CMT1000 commissioning and maintenance tool for the UNITROL 1000 Series excitation systems, providing diagnostics, configuration and monitoring.

CMW112

Operator PanelWoodward

SEG Wind Turbine Operator Panel

The Woodward SEG CMW112 is an operator panel and human-machine interface for wind turbines, providing real-time monitoring of wind speed, direction, power output and rotor speed. LCD display, IP65 or higher protection.

CN2011TC-2010

Temperature ControllerHoneywell

Programmable Temperature Controller

Recognized manufacturer reference available for industrial supply enquiry.

CN7220A2007

Valve ActuatorHoneywell

Valve Actuator

Recognized manufacturer reference available for industrial supply enquiry.

CNB-I5

Communication ModuleYokogawa

Communication Network Bridge Module

Yokogawa CNB-I5 communication network bridge module for CENTUM CS3000 DCS. 24 VDC, V-Net protocol.

CNB-IIA

Communication ModuleYokogawa

Communication Network Bridge Module

Yokogawa CNB-IIA communication network bridge module for CENTUM CS3000 DCS. 24 VDC, V-Net protocol.

CNT204

Counter Module

Bachmann CNT204 counter module for the M1 industrial automation system.

CNT204-H

Counter Module

Bachmann CNT204-H counter module for the M1 industrial automation system.

CNT204-R

Counter Module

Bachmann CNT204-R counter module for the M1 industrial automation system.

CNT204-X

Counter Module

Bachmann CNT204-X counter module for the M1 industrial automation system.

COM0011 2RAA005844A0007J

Communication Board COM0011

ABB COM0011 communication board with Ethernet RJ45, RS485 and IRIG-B interfaces.

COM741-S01

Communication ModuleSUPCON

Communication Module (S01)

SUPCON COM741-S01 communication module.

CON010+PR6426/010-140

Eddy Current Sensor System with 32mm Sensor

Eddy current signal converter (CON010) with 32 mm PR6426 sensor for non-contact measurement of radial and axial shaft displacement, position, eccentricity and speed. Sensitivity 2 V/mm, linear range ±4.0 mm, operating temperature -35 to 180 C, minimum shaft diameter 200 mm.

CON011/91+PR6426/010-140

Eddy Current Sensor System with 32mm Sensor

Eddy current signal converter (CON011/91) with 32 mm PR6426 sensor for non-contact measurement of radial and axial shaft displacement, position, eccentricity and speed. Sensitivity 2 V/mm, linear range ±4.0 mm, operating temperature -35 to 180 C, minimum shaft diameter 200 mm.

CON011/916-120

Eddy Current Signal Converter

Eddy current signal converter processing signals from eddy current sensors for monitoring radial and axial shaft displacement, position, eccentricity and speed. Compatible with PR6422-PR6426 sensors, 0 to 20,000 Hz frequency range, IP65, 23 to 32 VDC supply.

CON011/916-200

Eddy Current Signal Converter

Eddy current signal converter for monitoring radial and axial shaft displacement, position, eccentricity and speed. Compatible with PR6422-PR6426 sensors, 0 to 20,000 Hz frequency range, rise time under 15 us, IP65, 23 to 32 VDC supply.

CON011+PR6424/010-140

Eddy Current Sensor System

Non-contact eddy current displacement transducer system (CON011 converter with PR6424 sensor) for monitoring rotating machinery such as turbines, compressors and pumps. Measuring range ±100 um, frequency response 0.1 Hz to 10 kHz, sensitivity 10 mV/um.

CON020/T4+PR6424/01

Eddy Current Sensor System

Eddy current sensor system (CON020/T4 converter with PR6424/01 sensor) for non-contact measurement of radial and axial shaft displacement, position, eccentricity and speed in turbomachinery. Sensitivity 4 V/mm ±1.5%, operating temperature -35 to 180 C, minimum shaft diameter 80 mm.

CON021

Signal ConverterEmerson

Eddy Current Signal Converter

Emerson ePro CON021 eddy current signal converter for the PR642x proximity probe series, converting the high-frequency probe signal into a standard voltage output for shaft vibration, displacement, eccentricity and speed monitoring in turbomachinery. Operates from a -24V supply.

CON021

Eddy Current Signal Converter

Eddy current signal converter. Frequency range 0 to 20,000 Hz, rise time under 15 us, operating temperature -30 to 100 C, IP20 protection, supply voltage -23 to -32 V. ATEX, IEC-Ex, CE and CSA certified, housing material LMgSi 0.5 F22, weight ~120 g.

CON021/914-080

Eddy Current Signal Converter

Eddy current signal converter that amplifies and conditions weak signals from eddy current sensors (e.g. PR6423 series) into a standard voltage or 4-20 mA output. Operating temperature typically -30 to 100 C. Used on steam, gas and hydro turbines, compressors, pumps and fans.

CON021/916-120

Eddy Current Signal Converter

Eddy current signal converter. Frequency range 0 to 20,000 Hz, rise time under 15 us, operating temperature -30 to 100 C, IP20 protection, supply voltage -23 to -32 V, housing LMgSi 0.5 F22, weight ~120 g.

CON021/916-240

Eddy Current Signal Converter

CON021/916-240+PR6426/010-140

Eddy Current Vibration Sensor System

Vibration sensor system (CON021/916-240 converter with PR6426 sensor) for turbomachinery. Measurement range up to 24.0 mm (extended), sensitivity 2 V/mm, linearity error ≤3.5%, operating temperature -35 to +175 C, max surface speed 2,500 m/s.

CON021/PR6423/010-010

Eddy Current Displacement Sensor System

Eddy current displacement sensor system (CON021 converter with PR6423/010-010 sensor) for monitoring shaft displacement, vibration and position. Frequency range up to 20 kHz, operating temperature -30 to +100 C, API 670 compliant.

CON021+PR6423/000-010

Eddy Current Sensor System

Eddy current sensor system (CON021 converter with PR6423/000-010 probe) for turbomachinery. Measures shaft displacement, position, eccentricity and speed. Linear range up to 2 mm, frequency response 0-20,000 Hz, initial air gap 0.5 mm.

CON021+PR6423/000-030-CN

Eddy Current Sensor System

High-precision eddy current sensor system (CON021 converter with PR6423/000-030-CN sensor) for measuring radial and axial shaft displacement, position, eccentricity and speed in turbomachinery. 0 to 20,000 Hz, rise time under 15 us, IP20, 23 to 32 VDC.

CON021+PR6423/000-040

Eddy Current Displacement Transducer

Eddy current displacement transducer system (CON021 converter with PR6423/000-040 sensor) measuring radial and axial shaft displacement, position, eccentricity and speed. Frequency range 0 to 20,000 Hz, rise time under 15 us, IP65.

CON021+PR6423/001-011-CN

Eddy Current Sensor System

Eddy current sensor system (CON021 converter with PR6423/001-011-CN sensor) for non-contact measurement of shaft displacement and vibration in turbines, compressors and other rotating machinery. Frequency range 0 to 20,000 Hz, measurement range ±2 mm, IP66.

CON021+PR6423/002-130

Eddy Current Sensor System

Eddy current sensor system (CON021 converter with PR6423 probe) for dynamic shaft position measurement in turbomachinery. Frequency range 0 to 20,000 Hz, ISF 8 V/mm, linear range 2 mm, initial air gap 0.5 mm, stainless steel/PEEK construction.

CON021+PR6423/003-040

Eddy Current Transducer System

Eddy current transducer system (CON021 converter with PR6423/003-040 sensor) measuring radial and axial shaft displacement, position, eccentricity and speed. Frequency range 0 to 20,000 Hz, linearity error ≤2.0%, operating temperature -35 to +180 C.

CON021+PR6423/004-010-CN

Eddy Current Sensor System

Eddy current sensor system (CON021 converter with PR6423/004-010-CN sensor) for critical turbomachinery. Linear range 2 mm, initial air gap 0.5 mm, ISF 8 V/mm ±5%, accuracy ±1%, stainless steel case with PTFE cable, ATEX/IEC-Ex/CSA certified.

CON021+PR6423/00M-030

Eddy Current Sensor System

Eddy current signal converter with sensor (CON021 + PR6423/00M-030) measuring shaft displacement, position, eccentricity and speed in turbomachinery. Frequency range 0 to 20,000 Hz, rise time under 15 us, linearity error ≤1.5%, IP20.

CON021+PR6423/00R-010

Eddy Current Sensor System

Eddy current sensor system (CON021 converter with PR6423/00R-010 sensor). Linear range 2 mm, initial air gap 0.5 mm, ISF 8 V/mm ±5%, minimum shaft diameter 25 mm (42CrMo4 target), IP66, stainless steel case with PTFE cable.