Parts catalogue
Browse by category, product type and truck or manufacturer brand. No public pricing; each reference routes to wholesale enquiry.
System 57 Four-Channel I/O Control Card
Honeywell System 57 four-channel control card for input/output handling. 4-20 mA input, 24V +/-5% loop power supply output, power consumption 8.3W max / 7.5W typical, short-circuit and open-circuit protection.
System 57 Control Module
Honeywell System 57 control module. 24V DC input, Modbus TCP/IP, 500MHz processor, 512MB RAM / 1GB Flash, 4 expansion slots, operating temperature -10C to +60C.
System 57 Sensor Drive / Control Card
Honeywell System 57 sensor drive / control card. Powers and conditions industrial 4-20 mA sensors for stable signal acquisition in process control. Made in USA.
System 57 Catalytic Sensor Drive Card
Honeywell System 57 catalytic sensor drive / single-channel control card for gas detection. Conditions catalytic sensor signals, displays real-time readings on front-panel LCD, and triggers LED/relay alarms when gas exceeds preset thresholds. Dimensions 176 x 35.2 x 212 mm.
System 57 Analog Output Module
Honeywell System 57 analog output module. Converts sensor/controller signals into isolated 0-20 mA or 4-20 mA analog output for external instruments. Dimensions 105 x 112 x 25 mm. Made in USA.
System 57 Engineering / Function Card
Honeywell System 57 function/engineering card for gas detection and safety control. Interfaces catalytic gas detectors (up to 4 sensor inputs), 24 VDC (18-32 VDC), card-slot mounting in System 57 rack. Dimensions approx. 133 x 25 x 190 mm. Made in USA.
System 57 Single-Channel Control Card
Honeywell System 57 single-channel control card (4-20 mA). Four-part liquid display (25-segment analogue, four-character digital and message, icon section). A1/A2/A3 gas alarm LEDs, fault/inhibit push-button, alarm reset. 18-32 V DC supply, alarm setpoint resolution 1% FSD, electronic drift <2% over 6 months. Dimensions 17 x 2.5 x 11.2 cm.
System 57 Single-Channel Catalytic Control Card
Honeywell System 57 single-channel catalytic control card for gas detection. 25-segment analogue plus four-character digital and message display, A1/A2/A3 gas alarm LEDs with fault and inhibit indicators, 18-32 V DC supply, alarm resolution 1% FSD, electronic drift <2% per 6 months. Dimensions 17 x 2.5 x 11.2 cm.
Single Channel Control Card, Catalytic
Honeywell Analytics System 57 single-channel catalytic gas detection control card; 18-32 V DC supply with 25-segment display, A1/A2/A3 gas alarm LEDs and fault/inhibit indicators for combustible-gas monitoring.
System 57 DC Input Card
Honeywell System 57 DC input card for industrial automation. Converts DC voltage signals (+/-10V to +/-100V) into digital data, 12/16-bit configurable resolution, sampling up to 250 Hz, Modbus/HART/Profibus, IP65, operating temperature -20C to +60C. Dimensions 120 x 75 x 25 mm.
System 57 DC Input Card
Honeywell System 57 (5704 Series) DC input card. Part of the System 57 family for monitoring field-mounted industrial gas detectors. Up to 64 channels in a 19-inch subrack (3U card format), 32 channels in a half 19-inch sub-rack.
System 57 Single-Channel Field Interface Card
Honeywell System 57 single-channel field interface card. Conditions 4-20 mA signals from 2- or 3-wire toxic or combustible gas sensors. 24 VDC, ATEX/UL/CSA approved, hot-swappable, LED diagnostics. Dimensions 132 x 105 x 40 mm.
System 57 Double SPCO Relay Card
Honeywell System 57 double SPCO (single-pole change-over) relay card. Two independent SPCO relay outputs for switching, interlocking and control in PLC/DCS/SCADA systems. 24 VDC, Modbus/RS-485/Ethernet, IP66. Dimensions 102 x 25 x 112 mm.
System 57 Analytics Relay Card
Honeywell System 57 analytics relay card. Provides relay output interface for alarm, control and signal-switching in Honeywell industrial automation and safety systems.
System 57 Triple DPCO Relay Card
Honeywell System 57 triple DPCO relay card. Three independent relay channels each with dual Form-C (SPDT) contacts for alarm, fault, inhibit and general signaling. Per-channel LED status, 3U rack-mount card for 19-inch enclosures. Dimensions 25 x 75 x 110 mm. Made in USA.
System 57 Single-Channel Control Card
Honeywell System 57 single-channel control card. 24V operation, input polarity protection, signal conditioning for industrial control and monitoring.
System 57 Engineering Card
Honeywell System 57 engineering card. Provides a common rack interface to commission and operate each fitted control card. Indicators for Power On (green) and Unlocked (red), Up/Down, Reject/Accept and Print push-buttons; functions for bead mA, alarms, zero, signal, span, inhibit and clock.
System 57 PLC I/O Module
Honeywell System 57 PLC expansion module (input/output, communication or power, depending on configuration). 24V DC or higher, operating temperature -20C to +70C, IP20 or higher.
System 57 Rack Assembly
Honeywell System 57 rack assembly. Houses multiple control modules for centralized management of gas detectors and control components. 19-inch standard width, 3U height, rear field wiring, 8+1 FTE switch ports, C-series 24 VDC compatible. Made in USA.
System 57 Half-Width PLC Rack
Honeywell System 57 half-width 19-inch, 3U PLC/DCS rack. 8-way rear-channel rack assembly housing up to eight control cards (CPUs, communication modules, analog/digital I/O), rear field wiring, 24 VDC system power.
Quad Relay Interface Card (4 SPCO)
Honeywell quad relay interface card. Interfaces four sensors to the control card with reliable signal transmission and relay operation. 4 x SPCO relays, selectable latching/non-latching and energised/de-energised, contact rating 5 A at 110/250V AC, power 1.7W max / 1W typical.
Relay Interface Card
Honeywell relay interface card connecting four detector loops to control cards. 12 x SPCO + 4 x SPST relay contacts, selectable latching/non-latching and energised/de-energised, power 6.5W max / 3.5W typical. Dimensions approx. 12.2 x 5.2 x 13.2 cm.
Single-Channel Expansion Relay Card
Honeywell System 57 single-channel control / expansion relay card with alarm and display functions for connected gas detectors. Microprocessor-controlled, 24V DC (18-32V), configurable alarm setpoints, front-panel LCD, analog and digital outputs.
Relay Interface Card
Honeywell relay interface card. Relay operation selectable latching/non-latching and energised/de-energised, 12 x SPCO + 4 x SPST relays, field terminals 2.5mm2 (14 AWG), power 6.5W max / 3.5W typical, dimensions approx. 12.2 x 5.2 x 13.2 cm, weight 0.5 kg.
System 57 Four-Channel Catalytic Control Card
Honeywell System 57 control card interfacing up to four catalytic gas detectors. Backlit panel showing channel status and gas readings, per-channel alarm LEDs, push-button alarm reset, master fault/A1/A2/A3 relay functions via rear connections. Indoor use. Dimensions 13.3 x 2.54 x 19.0 cm. Made in USA.
Analytics Four-Channel Catalytic Control Card
Honeywell four-channel control card with catalytic input. Constant-current drive, initial accuracy +/-1%, electronic current adjustment 90-315 mA in 1 mA steps, max drive voltage 10V, full-scale signal range 15-300 mV, max line resistance 40 ohms at 200 mA, fault detection for open/short circuit and single bead failure. Power 12.8W max / 8.5W typical.
Four-Channel Control Card (4-20 mA)
Honeywell four-channel control card (4-20 mA input). Provides control, display and alarm facilities for up to four connected gas detectors. Isolated 24V +/-5% regulated loop-powered output, 25 mA max; short-circuit and open-circuit loop protection. Power 8.3W max / 7.5W typical.
Four Channel Control Card
Honeywell Analytics four-channel control card for 4-20 mA gas detector inputs, providing control, backlit LCD bargraph display and alarm facilities for up to four connected gas detectors in a 1-inch-wide package.
5704F Fire Control Card
Honeywell 5704F fire control card. 4 fire zone inputs, 2 switched DC outputs, single 3-function remote input, up to 16 configurable relay outputs. Dimensions 17.2 x 2.5 x 13.2 cm, net weight 0.16 kg.
5704F Fire Status Panel
Honeywell 5704F fire status panel. Indicator lamps for Fire, Fault, Inhibit, Silence, Walk Test and Earth Leakage Fault; channel functions for Walk Test and Inhibit; user controls Accept, Silence, Reset, Lamp Test; audible alerts for Fire, Fault, Accepted Fire and Accepted Fault. Net weight 0.5 kg.
Analytics Interconnect Cable
Honeywell Analytics interconnect cable.
MiniRAE Lite+ Portable Handheld VOC Monitor
RAE Systems (Honeywell) MiniRAE Lite+ portable handheld VOC monitor with PID 10.6 eV, rechargeable Li-ion battery and universal adapter (monitor only). Built-in wireless modem for real-time data connectivity up to 3 km via Bluetooth or mesh network.
MiniRAE Lite+ Portable Handheld VOC Monitor
RAE Systems (Honeywell) MiniRAE Lite+ portable handheld VOC monitor with PID 10.6 eV 1/2 inch lamp, rechargeable Li-ion battery, universal adapter, BLE data transmission and calibration kit. Built-in wireless modem for real-time data connectivity up to 3 km.
UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor
RAE Systems (Honeywell) UltraRAE 3000 portable handheld compound-specific VOC monitor with 9.8 eV lamp, Li-ion battery and universal charger. PID extended range 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode.
UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor
RAE Systems (Honeywell) UltraRAE 3000 portable handheld compound-specific VOC monitor with 9.8 eV lamp, Li-ion battery, universal charger, accessories kit and calibration kit. PID extended range 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode.
SGMGH Servo Motor
Yaskawa SGMGH-series AC servo motor.
SGDH Servopack Servo Amplifier
Yaskawa SGDH-series Servopack servo amplifier/drive.
COMBIVERT F5 Frequency Inverter
KEB COMBIVERT F5 frequency inverter, 0.4 kW, 220V class; controls asynchronous and synchronous AC motors.
KP1 Pressure Switch
Danfoss KP1 pressure switch. Regulation range -0.2 to 7.5 bar, differential 0.7-4.0 bar, SPDT, auto reset, flare 1/4 male connection, IP44, max working pressure 17 bar.
KP1 Low Pressure Switch
Danfoss KP1 low pressure switch. Regulation range -0.9 to 7 bar, differential 0.7 bar, SPDT, manual min reset, flare 1/4 male connection, IP30, max working pressure 17 bar.
KP2 Pressure Switch
Danfoss KP2 pressure switch. Regulation range -0.2 to 5 bar, differential 0.4-1.5 bar, SPDT, auto reset, flare 1/4 male connection, IP44, max working pressure 17 bar.
KPI35 Pressure Switch
Danfoss KPI35 pressure switch. Regulation range -0.2 to 8 bar, differential 0.4-1.5 bar, auto reset, G 1/4 connection, IP30, max working pressure 18 bar.
KP35 Pressure Switch
Danfoss KP35 pressure switch. Regulation range -0.2 to 7.5 bar, differential 0.7-4.0 bar, auto reset, G 1/4 connection, IP30, max working pressure 17 bar.
KP35 Pressure Switch
Danfoss KP35 pressure switch. Regulation range -0.2 to 7.5 bar, differential 0.7-4.0 bar, auto reset, G 1/4 connection, IP30, max working pressure 17 bar.
KP36 Pressure Switch
Danfoss KP36 pressure switch, regulation range 2.00-14.00 bar, differential 0.70-4.00 bar, auto reset, G 1/4 connection, IP30, max working pressure 17.0 bar.
KP5 Pressure Switch
Danfoss KP5 pressure switch. Regulation range 8-32 bar, differential 1.8-6.0 bar, SPDT, auto reset, flare 1/4 male connection, IP44, max working pressure 35 bar.
KP5 High Pressure Switch
Danfoss KP5 high pressure switch. Regulation range 8-32 bar, differential 3.0 bar, SPDT, manual max reset, flare 1/4 male connection, IP30, max working pressure 35 bar.
KP7 ABS Dual Pressure Switch
Danfoss KP7 ABS dual pressure switch. Both sides regulation 8-32 bar, differential 4.0 bar, 2 SPST(NC) contacts, manual max reset both sides.