SEW-Eurodrive MTF field distributor for decentralized MOVIMOT drives, with integrated fieldbus interface and MTA connection module. BW2 brake-resistor option.

Contact for wholesale

MTF11A003-503-P10A-00-MTA11A-503-S021-00

Drive ModuleSEW-Eurodrive

MOVIMOT Field Distributor

SEW-Eurodrive MTF field distributor for decentralized MOVIMOT drives, with integrated fieldbus interface and MTA connection module.

Contact for wholesale

MTF11A003-503-P10A-10-MTA11A-503-S021-00

Drive ModuleSEW-Eurodrive

MOVIMOT Field Distributor

SEW-Eurodrive MTF field distributor for decentralized MOVIMOT drives, with integrated fieldbus interface and MTA connection module.

Contact for wholesale

MTF11A007-503-E20A-20-S11-MTA11A-503-S523-D01-00-B

Drive ModuleSEW-Eurodrive

MOVIMOT Field Distributor

SEW-Eurodrive MTF field distributor for decentralized MOVIMOT drives, with integrated fieldbus interface and MTA connection module.

Contact for wholesale

MTF11A007-503-E20A-20-S11-MTA11A-503-S523-D01-00-BW2

Drive ModuleSEW-Eurodrive

MOVIMOT Field Distributor

SEW-Eurodrive MTF field distributor for decentralized MOVIMOT drives, with integrated fieldbus interface and MTA connection module. BW2 brake-resistor option.

Contact for wholesale

MTF11A007-503-E20A-20-S12B-MTA11A-503-I653-D01-00

Drive ModuleSEW-Eurodrive

MOVIMOT Field Distributor

SEW-Eurodrive MTF field distributor for decentralized MOVIMOT drives, with integrated fieldbus interface and MTA connection module.

Contact for wholesale

MTL24571

Signal ConverterHoneywell

Signal Converter

Recognized manufacturer reference available for industrial supply enquiry.

Contact for wholesale

MTL3052

Isolation BarrierMTL

Digital Isolator

The MTL3052 is a single-channel fully-floating digital isolator for hazardous areas (Zone 0, IIC, T4-6). Signal bandwidth DC to 10 kHz, replaceable 50 mA fuse.

Contact for wholesale

MTL4016

Interface ModuleMTL

Switch/Proximity Detector Interface Unit

The MTL4016 allows two switches or proximity detectors in a hazardous area to control two safe-area loads each. Dual relay output, double-pole on/off, 2 ms response, contact rating 10W.

Contact for wholesale

MTL4511

Interface ModuleMTL

Switch/Proximity Detector Interface Safety Module

The MTL4511 is a 1-channel switch/proximity detector interface with line fault detection. Response time 10 ms, contact rating 10W/0.5A/35V dc, for Zone 0 IIC T6 hazardous areas.

Contact for wholesale

MTL4516C

Interface ModuleMTL

Switch/Proximity Detector Interface

The MTL4516C is a 2-channel switch/proximity detector interface from Eaton's MTL 4500 series, enabling safe-area loads to be controlled by mechanical switches or NAMUR proximity detectors in hazardous areas. ATEX/IECEx/FM/CSA certified.

Contact for wholesale

MTL4521

Relay Output ModuleMTL

Loop-Powered Solenoid/Alarm Driver

The MTL4521 is a loop-powered solenoid/alarm driver for hazardous areas (Zone 0, IIC, T4). Input 20-35V DC, current limit 48 mA, min output 13.6V at 48 mA.

Contact for wholesale

MTL4541B

Isolation BarrierEaton

MTL4500 Isolating Driver / Barrier

Eaton MTL4541B intrinsically safe isolating driver / barrier from the MTL4500 series.

Contact for wholesale

MTL4544

Power SupplyMTL

Repeater Power Supply

The MTL4544 is a 2-channel repeater power supply from Eaton's MTL 4500 series, providing isolated power to hazardous-area transmitters and repeating the 4-20 mA signal with HART pass-through.

Contact for wholesale

MTL4575

Signal ConverterMTL

Temperature Converter

The MTL4575 is a single-channel temperature converter accepting RTD (Pt100/500/1000, Cu, Ni), thermocouple (J, K, T, E, R, S, B, N, XK) and millivolt inputs from hazardous-area sources (Zone 0, IIC, T4-T6).

Contact for wholesale

MTL4841

Communication ModuleMTL

Communications Module

The MTL4841 is a communications module with an RS485 2-wire multidrop host interface; up to 31 units per host station. Baud rates 1.2-38.4 kbaud, RS485 highway length up to 1 km, power consumption <1.0W.

Contact for wholesale

MTL4841-HART

Communication ModuleHoneywell

HART Communication Module

Honeywell MTL4841 HART maintenance/communication module from the MTL4800 intrinsically safe isolator range.

Contact for wholesale

MTL4842-HART

Interface ModuleHoneywell

HART Interface Module

Honeywell MTL4842 HART interface module from the MTL4800 intrinsically safe isolator range.

Contact for wholesale

MTL4850

Communication ModuleEaton MTL

HART Multiplexer Module

The MTL4850 is a HART multiplexer module providing a secure interface between HART field devices and asset management systems. Designed for functional safety applications (IEC 61508 SIL3), it offers 32 channels per module and supports up to 2016 HART devices via RS485 at 24 VDC.

Contact for wholesale

MTL4850

Analog Output ModuleTriconex

Isolated Analog Output Module

Triconex MTL4850 isolated analog output module for safety and control I/O systems.

Contact for wholesale

MTL5042

Isolation BarrierEaton

MTL5000 Isolated Barrier

Eaton MTL5042 intrinsically safe isolating barrier from the MTL5000 series.

Contact for wholesale

MTL5046

Signal ConverterEaton MTL

Isolating Driver

The MTL5046 is a single-channel isolating driver from the MTL 5000 series. It accepts a 4 to 20 mA safe-area input (1 to 24 mA under/over-range) with a 500 Hz to 10 kHz digital signal bandwidth and operates from a 20 to 35 V DC supply.

Contact for wholesale

MTL5046

Signal ConverterEaton

Isolating Driver

Eaton MTL5046 intrinsically safe isolating driver for hazardous-area signal interfacing.

Contact for wholesale

MTL5074

Signal ConverterEaton MTL

Temperature Converter

The MTL5074 is a temperature converter that converts low-level DC signals from thermocouples or RTDs in hazardous areas into a 4-20 mA current signal for safe-area loads. Accuracy is +/-0.1% FS, operating range -20 C to +85 C, IP20 protection, DIN-rail mounting.

Contact for wholesale

MTL5514

Interface ModuleEaton MTL

Switch/Proximity Detector Interface

The MTL5514 is a switch/proximity detector interface from the Eaton MTL 5000 series, providing galvanically isolated connection between hazardous-area mechanical switches or NAMUR proximity detectors and safe-area equipment.

Contact for wholesale

MTL5516C

Interface ModuleEaton MTL

Switch/Proximity Detector Interface

The MTL5516C is a two-channel switch/proximity detector interface from the Eaton MTL 5500 series. It provides galvanically isolated connections for mechanical switches or NAMUR proximity detectors, supports 4-20 mA loops with HART pass-through, and is certified for hazardous-area use.

Contact for wholesale

MTL5532

Isolation BarrierEaton MTL

Pulse Isolator

The MTL5532 is a single-channel, fully-floating pulse isolator from the MTL 5000 series. It accepts NAMUR switches/proximity detectors or 2- or 3-wire voltage/pulse transmitters in Zone 0 hazardous areas, with a relay alarm output rated 0.5 A at 35 V DC max.

Contact for wholesale

MTL5541

Power SupplyEaton MTL

Repeater Power Supply

The MTL5541 is a repeater power supply from the Eaton MTL 5000 series, providing a fully-floating DC supply to energise a 2- or 3-wire 4/20 mA transmitter in a hazardous area and repeat the current to drive a safe-area load.

Contact for wholesale

MTL5541S

Power SupplyEaton MTL

Repeater Power Supply

The MTL5541S is a single-channel isolator/repeater power supply from the MTL 5500 series with analog input and DIN-rail mounting. Signal range 0 to 24 mA, transmitter voltage 16.5 V at 20 mA, transfer accuracy better than 15 uA at 20 C.

Contact for wholesale

MTL5544

Power SupplyEaton MTL

Repeater Power Supply

The MTL5544 is a 2-channel 4/20 mA repeater power supply supporting HART and 2- or 3-wire transmitters. It provides fully-floating DC supplies to energise two hazardous-area transmitters and repeats the currents to drive two safe-area loads with bi-directional digital communication.

Contact for wholesale

MTL5546Y

Signal ConverterEaton MTL

Isolating Driver

The MTL5546Y is a single-channel isolating driver from the MTL 5000 series for driving an I/P converter in a hazardous area. Working range 4 to 20 mA with a 500 Hz to 10 kHz digital signal bandwidth.

Contact for wholesale

MTL5575

Signal ConverterEaton MTL

Temperature Converter

The MTL5575 is a temperature converter from the MTL 5000 series accepting thermocouple (THC) or RTD inputs in hazardous areas and providing an isolated safe-area output.

Contact for wholesale

MTL5581

Signal ConditionerEaton MTL

Signal Conditioner

The MTL5581 is a signal isolator/conditioner from the Eaton MTL 5500 series with a 0 to +/-5 mV input range, DIN-rail mounting and -20 C to +60 C operating range.

Contact for wholesale

MTL831B

TransmitterEaton MTL

Analogue Multiplexer Transmitter

The MTL831B is an intrinsically safe analogue input transmitter for Zone 0 hazardous areas. It monitors up to 16 thermocouples or millivolt sources (max +/-60 mV) and up to 15 RTDs, with redundant data highways and loop power supplied via the data highway.

Contact for wholesale

MTL831C

TransmitterEaton MTL

Analogue Multiplexer Transmitter

The MTL831C is an intrinsically safe analogue transmitter for Zone 0 hazardous areas. It monitors up to 16 inputs from thermocouples, millivolt sources, RTDs or potentiometers and transmits signal and power over a single shielded twisted-pair cable up to 2 km. Paired with the MTL838C receiver for Modbus output.

Contact for wholesale

MTL838-HON

Analog Input ModuleEaton MTL

Analogue Multiplexer Receiver

The MTL838-HON is a multiplexer receiver designed to connect with one or two MTL831C analog transmitters, managing transmitter configuration and receiving measurement data from up to 32 sensors. Data is made available via Modbus or for the LLMUX1 system, with sensor failure detection and status reporting.

Contact for wholesale

MTL838B

Analog Input ModuleEaton MTL

Analogue Multiplexer Receiver

The MTL838B is a safe-area multiplexer receiver for hazardous-area applications with dual redundant data highways and dual RS485 Modbus outputs. It provides status reporting and sensor failure detection; up to 31 MTL838B-MBF units can communicate with one Modbus master.

Contact for wholesale

MTL838C

Analog Input ModuleEaton MTL

Analogue Multiplexer Receiver

The MTL838C communicates the status of up to 32 analog inputs from a hazardous area to a safe area. It functions as a Modbus slave (addresses 1-247) with Normal and Initialization operating modes and decodes data from the MTL831C transmitter.

Contact for wholesale

PreviousPage 806 / 955Next