Parts catalogue

Touchpoint Plus Control Panel, 4 mA/mV Inputs

Honeywell Touchpoint Plus base control panel configured for 4 mA/mV inputs, used in fixed gas detection systems.

TPPLBDWV8NNNNNN

Touchpoint Plus Base Control Unit, Wall Mount, DC Powered, 8x mV Input

Honeywell Touchpoint Plus wall-mounted base control unit, 24VDC, supplied with 8 mV inputs including Master 1, Master 2 and Master Fault. Up to 8 channels with the base unit, expandable to 16 with an expansion unit.

TPPLEDWA8NNNNNN

Touchpoint Plus Expansion Unit, Wall Mount, DC Powered, 8x mA Input

Honeywell Touchpoint Plus wall-mounted expansion unit, DC powered, with 8 mA inputs. Adds I/O capacity to a Touchpoint Plus gas detection system.

TPPLWAAA8SNBRT

Gas Detection Controller

Honeywell

Touchpoint Plus Wireless Controller, AC Power, 2.4GHz, 8ch 4-20mA, 12 Relay

Honeywell Touchpoint Plus Wireless multi-channel controller with built-in wireless modem for integration with RAE Systems mesh networks. AC powered, 2.4GHz, 8 channels at 4-20mA, 12 relays, with battery backup.

Contact for wholesale

TPPLWDANNSNNNN

Touchpoint Plus Wireless Controller (DC Power, 2.4 GHz, 12 Relay)

Honeywell Touchpoint Plus Wireless multi-channel gas detection controller with built-in 2.4 GHz wireless modem for integration with RAE Systems by Honeywell Mesh. DC power, 12 relay configuration. Command-and-control element of the Mesh system, gathering data and monitoring alarms from Mesh-enabled toxic and flammable gas sensors.

TPPLWDBNNSNNNN

Touchpoint Plus Wireless Gas Detection Controller

Honeywell Touchpoint Plus wireless gas detection controller for up to 64 wireless channels at 868MHz, with DC supply, wall-mounted enclosure and 12 relays (EMEA).

TPPR-HW-L-LXXHXX

Touchpoint Pro Gas Detection Controller (Wall Mount)

Honeywell Touchpoint Pro wall-mount gas detection controller, 1200H x 800W x 300D, includes HMI, PCBs and SD card. Modular building-block design for gas control system installation and configuration. Part number TPPR-HW-L-LXXHXX.

TPPR-S-RLRM-4ACCCCCN

Touchpoint Pro Controller, 9 I/O

Honeywell Touchpoint Pro gas detection controller configured for 9 I/O.

TPPR-V-1000

Analog Input ModuleHoneywell

Touchpoint Pro Analogue Input Module

Honeywell (Honeywell Analytics) Touchpoint Pro TPPR-V-1000 4-20 mA analogue input module for the Touchpoint Pro gas-detection control system, accepting inputs from flammable, toxic, oxygen and flame detectors.

TPR280

Pressure GaugePfeiffer Vacuum

Pirani Vacuum Gauge

Pfeiffer Vacuum TPR 280 Pirani vacuum transmitter/gauge.

TPS02

Power SupplyABB Bailey

Infi 90 Termination Power Supply

ABB Bailey TPS02 termination power supply for the Infi 90 distributed control system.

TPS02

Protection RelayABB

Thyristor Protection System

ABB TPS02 protection system that detects and isolates thyristor faults rapidly for safe operation.

TPS10A0120-5A3-1-01

Power Supply ModuleSEW-Eurodrive

MOVITRANS Track Power Supply

SEW-Eurodrive MOVITRANS TPS10A0120-5A3-1-01 track power supply for contactless energy transfer.

TPSG4AI 1KHL015623R0002

Analog Input ModuleABB

4-Channel Analog Input Module

ABB TPSG4AI (1KHL015623R0002) 4-channel analog input module for high-speed voltage/current signal acquisition, 2500 V RMS isolation, +/-0.2% FS accuracy.

TPSG4AI 1KHL015623R0004

Analog Input ModuleABB

Analog Input Module

ABB TPSG4AI (1KHL015623R0004) analog input module for industrial automation, 24 VDC, 16/16 I/O.

TPSTU02

Termination UnitABB

Turbine Protection Termination Unit

ABB TPSTU02 termination unit for SPTPS02 and SPTPS13 turbine protection modules in a Harmony rack.

TPU326HS

PLC ModuleToshiba

PLC Module

Toshiba TPU326HS programmable logic controller module.

TQ402-111-402-000-012

Proximity TransducerVibro-Meter

TQ402 Proximity Transducer

Vibro-Meter TQ402 proximity transducer.

TQ402-111-402-000-013

Proximity SensorMeggitt

TQ402 Proximity Sensor

Meggitt TQ402 proximity measurement system. Measuring range 2mm or 4mm, operating temperature -40°C to +180°C, sensitivity 4mV/µm or 8mV/µm, voltage or current output.

TQ412-111-412-000-013

Proximity SensorMeggitt

TQ412 Proximity Transducer

Meggitt TQ412 proximity measurement system / non-contact transducer. Unthreaded length 0-230mm, body length 20-250mm, integral cable 0.5-2.0m, body thread M10x1 to 1/2"-20UNF, with optional protection.

TR-1-S

Drill Press Guard, Curved Small

Ferndale Safety small curved drill press safety shield for tight areas, protecting against access to rotating parts such as spindles and shafts. Shield size 120mm x 200mm with impact-resistant polycarbonate (Lexan) and 4 inch vertical adjustment.

TR-2-SP-CM

Standard Drill Press Guard

Ferndale Safety drill press safety shield with interlock switch (small bracket). Bolt-on with replaceable adjustable polycarbonate screen.

TR-2-T-CM

Drill Press Guard, Wrap-Around (360 Degree)

Ferndale Safety 360-degree wrap-around drill press shield, 232mm W x 130mm H, with ~15 inches of vertical adjustment. Attaches to the side of drill presses with as few as two bolts; impact-resistant polycarbonate (Lexan).

TR-3A-200-CM

Drill Press Guard, For Wide-Head Drills

Ferndale Safety drill press guard for wide-head drills with interlock switch. Bolt-on, replaceable adjustable polycarbonate screen.

TR-3B-200H180

Standard Radial Drill Press Guard

Ferndale Safety heavy-duty drill press guard for radial or large drill presses with gearbox heads. Includes a tamper-resistant built-in electrical safety interlock switch; 200mm wide x 180mm high shield.

TR-5-CM

Drill Press Guard, Large Shield For Long Spindles

Ferndale Safety drill press guard with large shield for long spindles, available with or without interlock switch. Bolt-on, replaceable adjustable polycarbonate screen.

TR-6-S

Drill Press Guard, Curved Medium

Ferndale Safety medium curved drill press safety shield covering 180 degrees, flipping open around a reversible mounting bracket. Shield size 170mm x 200mm with impact-resistant polycarbonate; larger version of the TR-1.

TRINITY-411

MicrophoneAhuja

Super Cardioid Dynamic Microphone

The Ahuja Trinity-411 is a pack of three super-cardioid dynamic microphones with neodymium cartridges for music and vocals, offering high intelligibility and maximum isolation from nearby vocalists. Supplied with three quick-detachable holders in a carry case. Frequency response 50-15,000Hz, sensitivity 2.5mV/Pa, impedance 600Ohm.

TRIO-DIODE/48DC/2X10/1X20

Redundancy ModulePhoenix Contact

TRIO Diode Redundancy Module

Phoenix Contact TRIO DIODE redundancy module, 48 V DC, 2 x 10 A / 1 x 20 A (order code 2866527).

TRX30100-BT0304A

Temperature TransmitterFinetek

TR220 Temperature Transmitter (0-150degC)

The FineTek TR220 series temperature transmitter provides accurate temperature readings and reliable data transmission for industrial applications. Range 0-150degC, supply up to 32VDC.

TRY/PRG/4-20MA/10-30DC

Temperature TransmitterMoore Industries

PC-Programmable Isolated Temperature Transmitter

Moore Industries TRY PC-programmable isolated 2-wire temperature transmitter, accepting RTD/thermocouple/mV/resistance inputs and providing a 4-20 mA output; 10-30 VDC loop power.

TS004E

Control BoardWEISS

Electronic Control Card

WEISS TS004E electronic control card that optimizes cycle time and reduces brake wear on rotary indexing tables; for use with WEISS TC and TR products.

TS10011

SamplerEnraf

HERMetic OXY 15m Tanol Hose

Honeywell Enraf HERMetic OXY 15 m hose for sampling inert gas in closed tanks before crude oil washing; rubber hose with in-line valve, weight and adapter for connection to HERMetic 1-inch valves.

TS10012

SamplerEnraf

HERMetic OXY 30m Tanol Hose

Honeywell Enraf HERMetic OXY 30 m hose for sampling inert gas in closed tanks before crude oil washing; rubber hose with in-line valve, weight and adapter for connection to HERMetic 1-inch valves.

TS10020

UTI MeterEnraf

HERMetic Press mm/WC

Honeywell Enraf HERMetic Press portable gas-pressure measurement device (mm/WC) for connection on HERMetic compact valves, supporting compliance with IMO tanker safety and pollution-prevention requirements.

TS10033

SamplerEnraf

HERMetic Sampler GT4

Enraf HERMetic Sampler GT4 for closed-condition liquid sampling where more than 0.5 litres is required. Gas-tight construction prevents vapour release; housing mounts on a HERMetic 4-inch deck valve.

TS10047

SamplerEnraf

HERMetic Sampler GT (with Case)

Honeywell Enraf HERMetic Sampler GT for safe closed-condition sampling of liquids up to 0.47 litre, with gas-tight construction preventing vapour release; supplied including case.

TS10048

SamplerEnraf

HERMetic Sampler GT Chem (with Case)

Honeywell Enraf HERMetic Sampler GT Chem with case. ATEX II 1 G Ex h IIB T6 Ga (Ta -20 to +80 C), gas tightness and max operating pressure 0.3 bar (4.4 psi).

TS10084

SamplerEnraf

HERMetic Sampler GT1

Enraf HERMetic Sampler GT1 for safe closed-condition liquid sampling up to 0.3 litres. Gas-tight construction prevents vapour release; housing mounts on a HERMetic 1-inch deck valve with quick-connect coupling.

TS10086

SamplerEnraf

HERMetic Sampler GTX Chem 30m

Honeywell Enraf HERMetic Sampler GTX Chem 30 m portable gas-tight sampler for closed operation with liquid transfer via overpressurization; installs on 2-inch HERMetic compact valves with quick-connect coupling.

TS10087

SamplerEnraf

HERMetic Sampler GTN Chem (with Case)

Honeywell Enraf HERMetic Sampler GTN Chem portable gas-tight sampler for liquid transfer under fully closed conditions into a septum-sealed laboratory bottle, with closed vapour-recovery system; supplied including case.

TS10089

SamplerEnraf

HERMetic Sampler GT (without bottle)

Enraf HERMetic Sampler GT for safe closed-condition sampling of liquids and chemicals up to 0.47 litres, supplied without bottle. Gas-tight construction prevents vapour release; housing mounts on a HERMetic 2-inch deck valve using adaptors.

TS10090

SamplerEnraf

HERMetic Sampler GT Chem (without Bottle)

Honeywell Enraf HERMetic Sampler GT Chem portable gas-tight sampler, supplied without bottle.

TS10091

SamplerEnraf

HERMetic Sampler GTX Chem 30m (without Bottle)

Honeywell Enraf HERMetic Sampler GTX Chem 30 m portable gas-tight sampler for closed sampling with liquid transfer via overpressurization; supplied without bottle.

TS10092

SamplerEnraf

HERMetic Sampler GTN Chem

Honeywell Enraf HERMetic Sampler GTN Chem portable gas-tight sampler for liquid transfer under fully closed conditions into a septum-sealed laboratory bottle, with closed vapour-recovery system.

TS10093

SamplerEnraf

HERMetic Sampler A-4 (without Bottle)

Honeywell Enraf HERMetic Sampler A-4 portable sampler (supplied without bottle) for restricted-condition sampling of liquids of low and high viscosity.

TS10094

SamplerEnraf

HERMetic Sampler GT4 (without Bottle)

Honeywell Enraf HERMetic Sampler GT4 for safe closed-loop sampling of liquids in storage tanks, installs on a deck valve with graduated tape for height measurement; gas-tight design prevents vapour emissions. Supplied without bottle.

TS10095

SamplerEnraf

HERMetic Sampler GTX Chem 0.7bar 30m

Honeywell Enraf HERMetic Sampler GTX Chem 30 m for safe closed-loop liquid sampling via pump overpressurization; gas-tight construction, Zone 0 certified for hazardous areas.