Parts catalogue

Pressure Transmitter with Chemical Seal

VEGA VEGABAR 81 pressure transmitter with chemical seal for pressure and level measurement of highly corrosive and hot media. Can be combined with any other VEGABAR Series 80 sensor for electronic differential pressure measurement.

VEGABAR 82

Pressure Transmitter with Ceramic Cell

VEGA VEGABAR 82 universally applicable pressure transmitter with ceramic measuring cell resistant to temperature shocks. Measures gases, vapours and liquids; can be combined with any other VEGABAR Series 80 sensor for electronic differential pressure measurement.

VEGABAR83

Pressure Transmitter with Metallic Measuring Cell

Pressure transmitter with metallic measuring cell for measurement of gases, vapours and liquids at high process pressures. Pressure range -1 to 1000 bar, process temperature -40 to 200 C.

VEGABAR86

Pressure TransmitterVega

Submersible Pressure Transmitter with Ceramic Measuring Cell

Submersible pressure transmitter with ceramic measuring cell for level measurement in wells, basins and open tanks. Maximum sensor length: cable 250 m, tube 6 m. Combinable with other VEGABAR Series 80 sensors for electronic differential pressure measurement.

Contact for wholesale

VEGABAR87

Submersible Pressure Transmitter with Metallic Measuring Cell

Submersible pressure transmitter with metallic measuring cell for pressure and level measurement of liquids and corrosive media. Maximum sensor length: cable 250 m, tube 6 m. Combinable with other VEGABAR Series 80 sensors for differential pressure measurement.

VEGACAL62

Capacitive Rod Probe for Continuous Level Measurement

Capacitive rod probe, partly PTFE insulated, for continuous level measurement of bulk solids and non-conductive liquids such as oil. A full/empty adjustment is required for setup.

VEGACAL63

Capacitive Rod Probe for Continuous Level Measurement

Capacitive rod probe, fully PE or PTFE insulated, for continuous level measurement of conductive and non-conductive liquids. A full/empty adjustment is required for setup.

VEGACAL64

Capacitive Rod Probe for Level Measurement of Adhesive Products

Capacitive rod probe, fully FEP insulated, for continuous level measurement of conductive and non-conductive liquids. Particularly suitable for viscous and adhesive products. A full/empty adjustment is required for setup.

VEGACAL65

Capacitive Cable Probe for Continuous Level Measurement

Capacitive cable probe, partly PTFE insulated, for continuous level measurement of bulk solids and non-conductive liquids such as oil. A full/empty adjustment is required for setup.

VEGACAL66

Capacitive Cable Probe for Continuous Level Measurement

Capacitive cable probe, fully insulated, for continuous level measurement in non-abrasive liquids and bulk solids. A full/empty adjustment is required for setup.

VEGACAL67

Capacitive High Temperature Probe for Level Measurement of Bulk Solids

Capacitive rod probe, partly ceramic insulated, for continuous level measurement of bulk solids at high process temperatures up to +400 C. Measuring range distance 40 m. A full/empty adjustment is required for setup.

VEGACAL69

Capacitive Double Rod Electrode for Level Measurement

Capacitive double rod probe, fully FEP insulated, for continuous level measurement of liquids in non-conductive vessels or for corrosive liquids. A full/empty adjustment is required for setup.

VEGACAP27

Adjustment-Free Capacitive Rod Probe for Level Detection of Adhesive Products

Adjustment-free capacitive point level sensor for liquids, including non-conductive containers. Rod probe fully PTFE or PFA insulated, sensor length up to 4 m. Typical applications are overfill and dry-run protection for adhesive and conductive liquids; operates from a dielectric constant of 1.5.

VEGACAP35

Adjustment-Free Capacitive Cable Probe for Level Detection

Adjustment-free capacitive point level sensor for bulk solids. Cable probe fully PE/PA insulated, sensor length up to 20 m. Used for overfill and dry-run protection; operates from a dielectric constant of 1.5. Process temperature -40 to 80 C.

VEGACAP62

Capacitive Rod Probe for Level Detection

Capacitive point level sensor, rod probe partly PTFE insulated, for liquids and bulk solids, sensor length up to 6 m. Process temperature -50 to 200 C, process pressure -1 to 64 bar.

VEGACAP63

Capacitive Rod Probe for Level Detection

Capacitive point level sensor, rod probe fully PE or PTFE insulated, for non-abrasive liquids and bulk solids, sensor length up to 6 m. Process temperature -50 to 200 C, process pressure -1 to 64 bar.

VEGACAP64

Capacitive Rod Probe for Level Detection of Adhesive Products

Capacitive point level sensor, rod probe fully PTFE insulated, for non-abrasive liquids and bulk solids, sensor length up to 4 m. Particularly suitable for viscous and adhesive products.

VEGACAP65

Capacitive Cable Probe for Level Detection

Capacitive point level sensor, cable probe partly PTFE insulated, for liquids and bulk solids, sensor length up to 32 m. Process temperature -50 to 200 C, process pressure -1 to 64 bar.

VEGACAP66

Capacitive Cable Probe for Level Detection

Capacitive point level sensor, cable probe fully PTFE insulated, for non-abrasive liquids and bulk solids, sensor length up to 32 m. Process temperature -50 to 150 C, process pressure -1 to 40 bar.

VEGACAP67

Capacitive High Temperature Electrode for Level Detection

Capacitive point level sensor, rod probe partly ceramic insulated, for bulk solids at high temperatures up to +400 C, sensor length up to 32 m. Process temperature -50 to 400 C, process pressure -1 to 16 bar.

VEGACAP69

Capacitive Double Rod Electrode for Level Detection

Capacitive point level sensor for aggressive liquids in non-conductive vessels. Double rod probe fully FEP insulated, sensor length up to 4 m. Process temperature -50 to 100 C, process pressure -1 to 2 bar.

VEGACAP98

Adjustment-Free Capacitive Rod Probe for Level Detection

Adjustment-free economical capacitive point level sensor for liquids and bulk solids, rod probe made of PP, sensor length up to 2 m. Suitable as overfill or dry-run protection in adhesive, conductive products; operates from a dielectric constant of 1.5.

VEGADIF85

Differential Pressure TransmitterVega

Differential Pressure Transmitter

Universal differential pressure transmitter with metallic measuring diaphragm for measurement of liquids, gases and vapours. Typical application areas include level measurement in pressurised vessels across most industrial sectors.

VEGAFLEX81

TDR Sensor for Continuous Level and Interface Measurement of Liquids

Universal TDR (guided microwave) level sensor for liquids of all kinds, available as cable, rod or coaxial probe. Reliable readings even in applications with steam, buildup, foam or condensation, including standpipes and bypass pipes. Measuring range distance up to 75 m.

VEGAFLEX82

TDR Sensor for Continuous Level Measurement of Bulk Solids

Universal TDR (guided microwave) level sensor for light and heavy bulk solids, available as cable or rod probe. Reliable readings even with large amounts of dust, condensation or buildup. Measuring range distance up to 75 m, process temperature -40 to 200 C.

VEGAFLEX83

TDR Sensor for Continuous Level and Interface Measurement of Liquids

TDR (guided microwave) level sensor with PFA-coated or polished probe for aggressive liquids or media with the highest hygienic requirements. Reliable readings even with steam, buildup, foam or condensation. Measuring range distance up to 32 m, process temperature -40 to 150 C.

VEGAFLEX86

TDR Sensor for Continuous Level and Interface Measurement of Liquids

TDR (guided microwave) level sensor for the most extreme process conditions, available as cable, rod or coaxial probe. Robust mechanical design with a second process seal (Second Line of Defense). Process temperature -196 to 450 C, process pressure -1 to 400 bar.

VEGAKON61

Conductive Limit Switch

VEGA VEGAKON 61 conductive limit switch for conductive liquids with partial PTFE insulation, for front-flush mounting. Ideally suited as full or empty detector in pipelines. Process temperature -40 to 150 degC, process pressure -1 to 25 bar.

VEGAKON66

Conductive Multiple Rod Limit Switch for Liquids

Conductive limit switch for conductive liquids with 2 to 3 rods, providing switching points between 12 cm and 4 m. Suitable as a full or empty detector in pipelines. Process temperature -40 to 100 C, process pressure -1 to 6 bar, relay (DPDT) output, protection rating IP66/IP67.

VEGAMAG81

Magnetic Level Indicator

Bypass magnetic level indicator mounted as a communicating tube on the side of a vessel. A float with integrated permanent magnet system transmits the liquid level contactlessly to the external magnetic display, requiring no external energy. Distance up to 4 m, process temperature -196 to 450 C.

VEGAMIPR61

Photoelectric SensorVega

Microwave Barrier Receiver for Level Detection

Receiving unit of the VEGAMIP microwave barrier for non-contact level detection of bulk solids and liquids. Largely independent of the chemical and physical properties of the product; also suitable for detection of objects such as vehicles or ships, or solid materials on conveyor belts. Used with the VEGAMIP T61 emitter.

VEGAMIPR62

Photoelectric SensorVega

Microwave Barrier Receiver, Detached Version, for Level Detection

Receiving unit of the VEGAMIP microwave barrier in separate (detached) version for non-contact level detection of bulk solids and liquids. Suitable for poorly accessible or dangerous mounting locations. Used with the VEGAMIP T61 emitter.

VEGAPOINT11

Ultra-Compact Capacitive Limit Switch

Low-cost ultra-compact capacitive limit switch for the detection of water-based liquids. From DK > 2, thread from 1/2 inch, universal connection G1 inch for hygiene adapter, M12 connector, transistor output.

VEGAPOINT21

Compact Capacitive Limit Switch

Low-cost compact capacitive limit switch for the detection of water-based liquids. From DK > 1.5, thread from 1/2 inch, universal connection G1 inch for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, Ex and hygiene approvals.

VEGAPOINT23

Compact Capacitive Limit Switch with Tube Extension

Compact capacitive limit switch with remote switching point (tube version up to 1 m) for the detection of water-based liquids. From DK > 1.5, thread from 1/2 inch, universal connection G1 inch for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, Ex and hygiene approvals.

VEGAPOINT24

Compact Capacitive Limit Switch

Compact capacitive limit switch designed for level detection of very adhesive media, reliably detecting coverage even with strong buildup. From DK > 1.5, thread from 1/2 inch, universal adapter G1 inch for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, Ex and hygiene approvals.

VEGAPOINT31

Compact Capacitive Limit Switch

Low-cost compact capacitive limit switch for the detection of light bulk solids. Thread from 1/2 inch, universal connection G1 inch for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, hygiene approvals.

VEGAPULS11

Compact Radar Sensor for Continuous Level Measurement

Compact non-contact radar level sensor for liquids and bulk solids in simple applications, plastic housing IP66/IP67 Type 4X. 4 to 20 mA output, measuring range up to 8 m, accuracy +/-5 mm. Suitable for water treatment and storage tanks with acids, lyes and additives.

VEGAPULS21

Compact Radar Sensor for Continuous Level Measurement

Compact non-contact radar level sensor for liquids and bulk solids, plastic housing IP66/IP67 Type 4X. 4 to 20 mA / HART output, measuring range up to 15 m, accuracy +/-2 mm, Ex approval.

VEGAPULS31

Compact Radar Sensor for Continuous Level Measurement

Compact non-contact radar level sensor for liquids and bulk solids, plastic housing IP66/IP67 Type 4X with display. 4 to 20 mA / HART output, measuring range up to 15 m, accuracy +/-2 mm, Ex approval, on-site display and 3-button operation.

VEGAPULS42

Compact Radar Sensor for Continuous Level Measurement

Compact non-contact radar level sensor for liquids and bulk solids in factory automation. Thread from 3/4 inch, universal connection G1 inch for hygiene adapter, three-wire IO-Link, PNP/NPN, 4 to 20 mA (active), hygiene approval, coloured 360-degree status display.

VEGAPULS6X

Radar Sensor for Continuous Level Measurement of Liquids and Bulk Solids

Universal non-contact radar level sensor for continuous level measurement of liquids and bulk solids under all process conditions. Variable antenna systems for application-oriented configuration. Measuring range distance up to 120 m, process temperature -196 to 450 C.

VEGAPULSAIR23

Autarkic Radar Level Sensor for Plastic Vessels

Self-powered (autarkic) radar level sensor with wireless measured-value transmission, ideal for level measurement in IBCs and plastic vessels by measuring through the closed vessel ceiling. NB-IoT/CAT-M1 and LoRa connectivity, measuring range up to 3 m, accuracy +/-5 mm.

VEGAPULSAIR41

Autarkic Radar Level Sensor for Liquids and Bulk Solids

Self-powered (autarkic) radar level sensor with wireless measured-value transmission for bulk solids and liquids, suitable for mobile bulk-solids silos. NB-IoT/CAT-M1 and LoRa connectivity, measuring range up to 15 m, accuracy +/-2 mm.

VEGAPULSAIR42

Autarkic Radar Level Sensor for Liquids and Bulk Solids

VEGAPULSC11

Wired Radar Sensor for Continuous Level Measurement

Wired non-contact radar level sensor for simple applications requiring a high degree of protection, IP66/IP68 Type 6P. Axial cable outlet, 4 to 20 mA output, measuring range up to 8 m, accuracy +/-5 mm, 10 m PVC cable. Process temperature -40 to 60 C.

VEGAPULSC21

Wired Radar Sensor for Continuous Level Measurement

Wired non-contact radar level sensor for simple applications requiring a high degree of protection. Axial cable outlet, measuring range up to 15 m, accuracy +/-2 mm, 4 to 20 mA, HART, SDI-12 or Modbus output, Ex approval. Suitable for water treatment, pumping stations and rain overflow basins.

VEGAPULSC22

Wired Radar Sensor for Continuous Level Measurement

Wired non-contact radar level sensor for standard tasks requiring a high degree of protection, IP66/IP68 Type 6P. Lateral cable outlet, measuring range up to 15 m, accuracy +/-2 mm, 4 to 20 mA, HART, SDI-12 or Modbus output, Ex approval.