Pressure sensor (SENSOR GP-PRESSURE) for Caterpillar heavy equipment including the 990 wheel loader. Monitors hydraulic or oil system pressure and sends an electrical signal to the machine control system.

CAT 990+2Contact for wholesale

16437-501

DCS ModuleSiemens Moore

APACS+ Control System Module

Moore APACS+ process control system module used in Siemens Moore distributed control systems.

Contact for wholesale

164466-01

Interface ModuleBently Nevada

3500/22 Rack Interface Module

The Bently Nevada 3500/22 Rack Interface Module (RIM) is the interface between the 3500 monitoring system and compatible communication processors, capturing steady-state and transient waveform data. Supports up to 127 rack addresses; power 10.5 watts.

Contact for wholesale

164746-01

Analog Input ModuleBently Nevada

Seismic Direct Input Card

The Bently Nevada 164746-01 is a Seismic Direct Input Card for data acquisition and processing in seismic monitoring, supporting 2-wire current-mode sensors. 16-bit A/D resolution, inputs up to 24 kHz.

Contact for wholesale

164952-01-01

AccelerometerBently Nevada

Accelerometer Mounting Kit

The Bently Nevada 164952-01-01 Accelerometer Mounting Kit provides a protective enclosure for accelerometers used in turbine, compressor and rotating-machinery monitoring, shielding sensors from dust, moisture and mechanical stress. Includes housing, cover, O-ring, gasket, cable grip and screws; meets API 670 when installed.

Contact for wholesale

165-4262

PistonCaterpillar

Piston Body

Piston body assembly for Caterpillar 611 wheel tractor-scraper hydraulic system.

CAT 611Contact for wholesale

165-4500

Gear PumpCaterpillar

Gear Pump and Drive

Four-section hydraulic fluid gear pump and drive group for Caterpillar 789C and 789D large off-highway mining trucks. Supplies hydraulic pressure to multiple circuits.

CAT 789D+1Contact for wholesale

165-5639

ValveCaterpillar

Valve

Caterpillar valve component. Applicable model data missing from source record.

Contact for wholesale

165-5648

Air DryerCaterpillar

Air Dryer

Air dryer assembly for Caterpillar 773D off-highway mining truck air brake system.

CAT 773DContact for wholesale

165-5777

Travel MotorCaterpillar

Final Drive Travel Motor

Final drive travel motor assembly for Caterpillar 315D excavator. Provides the hydraulic motive force for crawler travel.

CAT 315DContact for wholesale

165-6634

SensorCaterpillar

Coolant Level Sensor

Coolant level sensor (SENSOR GP-COOLANT LEVEL) for Caterpillar engines including 3306B, 3512B, 3126B, C7 industrial, and G3512/G3516 series. Detects coolant level in the expansion tank and alerts the operator when level is low.

Contact for wholesale

1656668

Piston RingCaterpillar

Piston Oil Control Ring

Piston oil control ring for Caterpillar 3512C and 3516B large diesel engines. Controls oil consumption by scraping excess oil from cylinder walls.

CAT 3516B+1Contact for wholesale

165811

Valve TerminalFesto

CPV14 Electrical Interface

Festo CPV14-GE-DI01-8 electrical interface for CPV valve terminals, order number 165811.

Contact for wholesale

165844-14

Proximity ProbeBently Nevada

3300 XL Proximity Probe

The Bently Nevada 165844-14 is a 3300 XL proximity probe for non-contact measurement of vibration and displacement, with extended linear range for critical machinery monitoring.

Contact for wholesale

1658633

Hydraulic CylinderCaterpillar

Bulldozer Lift Cylinder

Bulldozer blade lift cylinder group for Caterpillar D8L track-type tractor. Raises and lowers the bulldozer blade.

CAT D8LContact for wholesale

166-1497

Oil SealCaterpillar

Lip Seal

Lip-type seal (9X-4598 cross-reference) for Caterpillar hydraulic excavators including 325D, 330D, 336D, 345D, 349F, 390D, and 390F. Provides a dynamic sealing surface to prevent fluid leakage in hydraulic or rotating assemblies.

CAT 395Contact for wholesale

166-5942

BellowsCaterpillar

Bellows

Exhaust or intake bellows assembly for Caterpillar 3516B gas engine, used in large industrial power generation.

CAT 3516BContact for wholesale

166-6761

Slip JointCaterpillar

Slip Joint

Driveshaft slip joint assembly for Caterpillar 938G wheel loader, allowing axial movement in the driveline.

CAT 938GContact for wholesale

166-6937

GaugeCaterpillar

Quad Gauge Module

Quad gauge module (MODULE GP-QUAD GAUGE) for Caterpillar 3512 engine instrument panels. Displays four engine parameters simultaneously in a single panel unit as part of the 155-2554 instrument panel assembly.

CAT 3512Contact for wholesale

166-9145

GasketCaterpillar

Cylinder Block Gasket

Cylinder block gasket for Caterpillar C32 V12 marine and industrial diesel engine. Seals the cylinder block mating surface.

CAT C32Contact for wholesale

16644992-001

Digital Output ModuleHoneywell

Digital Output Module (TDC 3000)

Honeywell 16644992-001 digital output module for TDC 3000 and Universal Station systems, providing discrete digital switching outputs with low-noise, interference-protected output channels for industrial automation.

Contact for wholesale

16644993-001

ControllerHoneywell

C300 Controller Module

Honeywell 16644993-001 C300 controller module for Experion PKS distributed control systems, delivering deterministic high-speed process control with Series 8 I/O, supports redundant controller configurations.

Contact for wholesale

16644994-001

Memory ModuleHoneywell

HC900 Controller Memory Backup Module

Honeywell 16644994-001 controller memory backup module preserving HC900 controller configuration and critical data during power loss or module replacement. Non-volatile backup memory, plug-in to HC900 controller base.

Contact for wholesale

16644995-001

Power SupplyHoneywell

HC900 Power Supply Module

Honeywell 16644995-001 power supply module for HC900 Hybrid Controllers, provides stable isolated power to the controller rack and I/O modules. Over-voltage, over-current and thermal protection.

Contact for wholesale

16699-01-02-02

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-01-02-02 is a velocity seismoprobe for industrial vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

Contact for wholesale

16699-03

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-03 velocity seismoprobe measures vibration velocity for machinery health monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

Contact for wholesale

16699-03-02-02

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-03-02-02 is a velocity seismoprobe for vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec; minimum operating frequency 600 RPM; angular range 90 deg +/-10 deg.

Contact for wholesale

16699-10-02-01

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-10-02-01 is a velocity seismoprobe for industrial vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec (19.7 mV/mm/sec); circular or flanged mounting bases.

Contact for wholesale

16699-10-02-02

Velocity TransducerBently Nevada

Velocity Seismoprobe

The Bently Nevada 16699-10-02-02 is a velocity seismoprobe for vibration monitoring. Operating range 270-900 RPM; sensitivity 500 mV/in/sec; minimum operating frequency 600 RPM; angular range 90 deg +/-10 deg.

Contact for wholesale

167-1177

Pilot ValveCaterpillar

Pilot Valve

Hydraulic pilot valve (VALVE GP-PIL) for the Caterpillar D6R II track-type tractor. Controls pilot pressure signals to the main hydraulic control valve system.

CAT D6RContact for wholesale

167-1709

SensorCaterpillar

Oil Pressure Sensor

Oil pressure sensor (GP-PRESSURE) for Caterpillar equipment fitted with 3116, 3126, 3408E, 3412E, C30, and C32 engines. Also used on off-highway trucks, wheel loaders, and motor graders.

CAT 5110B+4Contact for wholesale

16710

Cable AssemblyBently Nevada

Interconnect Cable

Bently Nevada 16710 series interconnect cable for connecting proximity probes, sensors and monitoring modules in 3300 XL and 3500 machinery protection systems.

Contact for wholesale

16710-03

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-03 is a coaxial shielded interconnect cable for 3300 XL and 3500 Machinery Protection Systems, providing reliable signal transmission between proximity probes, sensors and monitoring modules. 50 ohm impedance, BNC connectors, 3 m.

Contact for wholesale

16710-06

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-06 interconnect cable connects Bently Nevada sensors, proximity probes and monitoring systems. 6 ft (1.83 m), copper-alloy conductors, Teflon insulation.

Contact for wholesale

16710-07

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-07 armored, shielded interconnect cable is engineered for vibration monitoring systems. 82 in (2.08 m), 3-conductor 22 AWG, 3-socket plug to terminal lugs.

Contact for wholesale

16710-08

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-08 armored interconnect cable provides reliable signal transmission in industrial automation systems. 8 ft (2.4 m), 3-conductor 22 AWG, full foil and braid shielding, 10 A.

Contact for wholesale

16710-12

Cable AssemblyBently Nevada

16710 Interconnect Cable

The Bently Nevada 16710-12 interconnect cable is a 3-conductor shielded 22 AWG armored cable with a 3-socket plug at one end and terminal lugs at the other. 12 ft (approx. 3.6 m).

Contact for wholesale

PreviousPage 97 / 955Next