Parts catalogue

Interconnect Cable

Bently Nevada 16925-25 is a 25-foot (approx. 7.6 m) shielded interconnect cable with 3-wire 22 AWG conductors and PVC insulation/jacket, rated -40°C to 85°C, for vibration monitoring and industrial automation signal transmission.

16925-30

Interconnect Cable

Bently Nevada 16925-30 is a 30 ft (9.14 m) 3-conductor shielded twisted-pair interconnect cable, 22 AWG, with foil and braid EMI shielding for stable signal transmission between vibration sensors and monitoring modules.

16925-33

Interconnect Cable

Bently Nevada 16925-33 is a 33 ft (10 m) non-armored interconnect cable for connecting proximity probes, sensors, and monitoring modules in Bently Nevada vibration monitoring and protection systems.

16925-50

Interconnect Cable

Bently Nevada 16925-50 is a 50 ft interconnect cable with PVC jacket for industrial machinery monitoring systems, rated -40°C to +85°C, providing reliable signal transmission in harsh environments.

Contact for wholesale

16925-66

Interconnect Cable

Bently Nevada 16925-66 is a factory-assembled coaxial signal cable (66 ft) for connecting proximity probes, extension cables, and monitoring modules in Bently Nevada 3300, 3500, and TSI systems with coaxial shielding for noise immunity.

16925-70

Interconnect Cable

Bently Nevada 16925-70 is a 70 ft (21 m) shielded interconnect cable with 37-pin D-sub connectors and tinned copper conductors, used with 3500 Series modules, providing braided EMI shielding for signal integrity.

16925-99

Standard Extension Cable

Bently Nevada 16925-99 is a 99 ft (approx. 30 m) shielded standard extension cable with miniature coaxial ClickLoc connector and 2 x 24 AWG conductors, polyurethane insulation and PVC jacket, rated -40°C to +70°C.

169253-01

Vibration Monitor ModuleBently Nevada

Monitor Module

Bently Nevada 169253-01 is a module from the 3300 series used for monitoring and protecting critical rotating machinery, operating at 24 VDC with about 100 mA consumption over a -40°C to +70°C range.

16929-12

Interconnect Cable

Bently Nevada 16929-12 is a 12 ft (3.66 m) shielded interconnect cable for the 3500 Series and related monitoring systems, providing reliable signal transmission with enhanced EMI shielding.

169337

Power SupplyBently Nevada

External Power Supply Module

Bently Nevada 169337 is an external power supply module that provides regulated DC output to power Bently Nevada 3500 series machinery protection racks, built for harsh industrial environments.

169459-01

3500/46M Hydro Monitor I/O Module

Bently Nevada 169459-01 is an I/O module for the 3500/46M Hydro Monitor in the 3500 machinery protection system.

16UNI

Digital Input ModuleHoneywell

Safe Digital Input Field Termination Assembly

Honeywell FC-TSDI 16UNI Safety Manager safe digital input field termination assembly.

16XGE-SFPP

Communication ModuleJuniper

MPC 3D 16x10GE SFPP Line Card

Juniper MPC 3D 16x 10GbE SFPP line card (router module).

16Y-40-03300

IdlerShantui

Front Idler

Front idler assembly for Komatsu D60/D65 series bulldozer undercarriage, guiding the track chain.

CAT 320DContact for wholesale

170-2512

SwitchCaterpillar

Toggle Switch

Toggle switch (SWITCH GP-TOGGLE) for the Caterpillar 320D, 323D, 324D, and 315D L excavator series. Part of the cab electrical control system for operator-selectable functions.

170-5183

Fuel InjectorCaterpillar

Fuel Injector

Diesel fuel injector for Caterpillar 3304 and 3306 engines, used in excavators, motor graders, and wheel loaders of that era.

CAT 3304+7Contact for wholesale

170-5187

Fuel InjectorCaterpillar

Fuel Injector

Diesel fuel injector for the Caterpillar 3406 and 3406B engines. Several interchangeable part numbers exist for this injector.

CAT 3406+1Contact for wholesale

170-8592

PinCaterpillar

Pin for Caterpillar D6T and D6R Series III bulldozers, used in undercarriage, blade, or linkage pin joints.

CAT D6T+1Contact for wholesale

170-8873

Swing GearboxCaterpillar

Swing Reduction Gearbox

Swing reduction (slew) gearbox for Caterpillar E305 and E306E2 mini excavators, providing gear reduction between the swing motor and the upper structure.

CAT E305+1Contact for wholesale

1700

Photoelectric SensorCognex

In-Sight Vision Sensor

Cognex In-Sight 1700 series machine vision sensor/camera.

1700RZ10005C

Process ControllerABB

Taylor MOD 30 Controller

ABB (Taylor) MOD 30 process controller, 1700RZ10005C.

1701/15

Vibration MonitorBently Nevada

FieldMonitor Proximitor Input Monitor

Bently Nevada 1701/15 is a FieldMonitor Proximitor input monitor for radial vibration and thrust position measurement on rotating machinery.

1701/25

Vibration MonitorBently Nevada

FieldMonitor Seismic Input Monitor

Bently Nevada 1701/25 is a FieldMonitor seismic input monitor for vibration measurement on industrial rotating machinery.

170133-050-00

FieldMonitor Proximitor Sensor Module

Bently Nevada 170133-050-00 is a Proximitor sensor module for the 1701 FieldMonitor, compatible with 3300 series 5 mm and 8 mm probes, with 5 m system length, 200 mV/mil scale factor and 24 VDC supply.

170133-090-00

FieldMonitor Proximitor Sensor Module

Bently Nevada 170133-090-00 is a non-contact Proximitor sensor module for the 1701 FieldMonitor, using a 3300 series 5 mm or 8 mm probe, 9 m system length, 200 mV/mil scale factor and 24 VDC supply.

170133-140-00

Dual Proximitor Sensor Module

Bently Nevada 170133-140-00 is a dual Proximitor module with two built-in sensors, compatible with 3300 series 5 mm or 8 mm probes, supporting 5, 9 and 14 m system lengths with 250-2250 µm calibration range.

170133-XXX-00

Dual Proximitor Sensor Module

Bently Nevada 1701 FieldMonitor dual Proximitor sensor module with two built-in sensors; compatible with any standard 3300-series 5 mm or 8 mm probe and 5/9/14 m system lengths. The XXX denotes the system-length variant.

170180-01-00

FieldMonitor External Transducer I/O Module

Bently Nevada 170180-01-00 is a 2-channel FieldMonitor external transducer I/O module accepting -24 VDC Proximitor or accelerometer inputs, rated -34°C to +85°C.

170180-01-05

FieldMonitor External Transducer I/O Module

Bently Nevada 170180-01-05 is a 2-channel FieldMonitor external transducer I/O module that occupies one slot in a FieldMonitor terminal base, with channels configurable for -24 VDC Proximitor or accelerometer inputs.

170180-02-00

FieldMonitor External Transducer I/O Module

Bently Nevada 170180-02-00 is a FieldMonitor external transducer I/O module supporting two 2-wire velocity transducer inputs, occupying a single terminal-base slot, rated -40°C to +85°C and powered at 24 VDC.

170190-01

Isolation BarrierBently Nevada

Dual Galvanic Isolator

Bently Nevada 170190-01 is a dual galvanic isolator with +19 to +33 VDC primary power input, intrinsically safe design, 16-pin Flexbus and 25-pin DSUB connectors, for FieldMonitor machinery protection systems.

170921

Pneumatic CylinderFesto

DFM Guided Actuator

Festo DFM-20 series pneumatic guided drive actuator, order number 170921.

170AAI03000

Analog Input Module, 8-Channel

Schneider Electric Modicon Momentum 8-channel distributed analog input module. Input ranges +/-20 mA, 4-20 mA, +/-10 V, +/-5 V, 1-5 V; 16-bit signed resolution.

170AAI14000

Analog Input Base, 16-Channel

Schneider Electric Modicon Momentum 16-channel single-ended analog input base. Input ranges 4-20 mA, +/-10 V, +/-5 V; 12-bit resolution.

170AAI52040

Analog Input Base, 4-Channel

Schneider Electric Modicon Momentum 4-channel differential analog input base. Ranges +/-100 mV and +/-25 mV; supports thermocouple types E,S,K,N,B,R,J,T.

170AAO12000

Analog Output ModuleSchneider Electric

Analogue Output Base, 4-Channel

Schneider Electric Modicon Momentum 4-channel analogue output base. Output ranges +/-10 V and 0-20 mA, 12-bit resolution, full 16-bit signed data format.

170AAO92100

Analog Output ModuleSchneider Electric

Analog Output Module, 4-Channel

Schneider Electric Modicon Momentum distributed analog output base. 4 outputs, ranges +/-10 V and 4-20 mA, full 16-bit signed data format.

170ADI35000

Digital Input ModuleSchneider Electric

Discrete Input Module, 32-Point

Schneider Electric Modicon Momentum 32-channel discrete input module. Input voltage 24 VDC, positive logic (IEC 1131-2 Type 1), IP20.

170ADI74050

Digital Input ModuleSchneider Electric

AC Discrete Input Base

Schneider Electric Modicon Momentum AC discrete input base. 16 inputs (2 groups of 8, IEC 1131-2 Type 2), input voltage 230 V AC.

170ADM35010

Discrete Solid State I/O Base

Schneider Electric Modicon Momentum discrete solid state DC I/O base. 16 inputs (IEC 1131-2 Type 1, 24 V DC) and 16 solid-state outputs.

170ADM35011

Discrete Solid State I/O Base

Schneider Electric Modicon Momentum discrete solid state DC I/O base. 16 inputs (IEC 1131-2 Type 1) and 16 solid-state outputs, 24 V DC.

170ADO35000

Digital Output ModuleSchneider Electric

Discrete Output Module, 32-Point

Schneider Electric Modicon Momentum 32-channel discrete output module. Solid-state switch outputs, 24 VDC, 0.5 A per channel, short-circuit protected.

170AEC92000

High-Speed Counter Module Base

Schneider Electric Modicon Momentum high-speed counter module base. 2 counters, 6 discrete inputs, 4 discrete outputs, input voltage -3 to 30 V DC.

170AMM09000

Analogue/Discrete Mixed I/O Base

Schneider Electric Modicon Momentum analogue/discrete mixed I/O base. 2 discrete outputs, 4 discrete inputs, 4 differential analog inputs, 2 analog outputs.

170ANR12091

Communication ModuleSchneider Electric

Analogue/Discrete I/O Base with Communication Adapter

Schneider Electric Modicon Momentum analogue/discrete I/O base with communication adapter. 8 discrete outputs, 8 discrete inputs, 6 analog inputs (+/-10 V), 4 analog outputs.

170BAI03600

Analog Input Module, 8-Channel

Schneider Electric Modicon Momentum 8-channel analog input module. Input signal range +/-10 V, input voltage 24 VDC, Modbus/TCP and EtherNet/IP.

170BDM34600

Digital Output ModuleSchneider Electric

Remote Discrete Output Module, 32-Point

Schneider Electric Modicon Momentum remote discrete output module. 32 solid-state outputs, 24 V DC, individual LED status, DIN rail mount.

170BNO67100

Interface ModuleSchneider Electric

Interbus Branch Interface

Schneider Electric Modicon Momentum Interbus branch interface. SUPI 2 generation Interbus communication adaptor, rated supply 24 V DC.