Parts catalogue

FieldMonitor External Transducer I/O Module

Bently Nevada 170180-02-00 is a FieldMonitor external transducer I/O module supporting two 2-wire velocity transducer inputs, occupying a single terminal-base slot, rated -40°C to +85°C and powered at 24 VDC.

170190-01

Isolation BarrierBently Nevada

Dual Galvanic Isolator

Bently Nevada 170190-01 is a dual galvanic isolator with +19 to +33 VDC primary power input, intrinsically safe design, 16-pin Flexbus and 25-pin DSUB connectors, for FieldMonitor machinery protection systems.

172002-5

Machinery Protection ModuleBently Nevada

General Purpose Equipment Monitor

Bently Nevada 172002-5 is a 1900/65A general-purpose equipment monitor for continuous vibration and temperature monitoring of industrial machinery, with four configurable vibration channels and 4-20 mA analog outputs.

172004-5

Machinery Protection ModuleBently Nevada

General Purpose Equipment Monitor

Bently Nevada 172004-5 is a 1900/65A general-purpose equipment monitor for continuous vibration and temperature monitoring of industrial machinery, with four configurable vibration channels and 4-20 mA analog outputs.

Contact for wholesale

172103-01

3500/65 RTD/Isolated Tip TC I/O Module

Bently Nevada 172103-01 is an RTD/Isolated Tip Thermocouple I/O module with internal terminations for the 3500/65 Temperature Monitor, accepting 3-wire and 4-wire RTD and isolated-tip TC inputs evaluated against programmable alarm setpoints.

172109-01

3500/65 Temperature Monitor I/O Module

Bently Nevada 172109-01 is a 3500/65 series I/O module for high-precision temperature monitoring, supporting 16 channels of 3-wire/4-wire RTD and isolated-tip thermocouple inputs.

172115-01

Terminal BlockBently Nevada

External Termination Block

Bently Nevada 172115-01 is an external termination block with Euro-style connectors for RTD and isolated-tip thermocouple inputs, designed for use with the 3500/65 Temperature Monitor.

172323-01

Machinery Protection ModuleBently Nevada

1900/65A General Purpose Equipment Monitor

Bently Nevada 172323-01 is a 1900/65A general-purpose equipment monitor with 4 transducer inputs, 4 temperature inputs, 6 relay outputs, four 4-20 mA outputs and Modbus communication over Ethernet and RS232/485.

175794-01

Machinery Dynamics Monitor

Bently Nevada 175794-01 is a 3701/40 and 3701/60 series machinery dynamics monitor for vibration and rod-position monitoring on reciprocating compressors, engines and turbines, API-618 compliant with DCS/SCADA integration.

176449-01

3500/40M Proximitor Monitor

Bently Nevada 176449-01 is a 3500/40M Proximitor monitor that interfaces with proximity transducers, converting signals to a voltage output proportional to distance for shaft vibration and displacement monitoring.

176449-02

3500/42M Proximitor/Seismic Monitor

Bently Nevada 176449-02 is a 3500/42M Proximitor/Seismic monitor that accepts signals from proximity and seismic transducers for machinery protection, with IP66 enclosure, ±0.5% accuracy and 24 VDC supply.

176449-02

3500/42M Proximitor Seismic Monitor

Bently Nevada 176449-02 3500/42M 4-channel Proximitor/Seismic monitor; conditions proximity and seismic transducer signals for radial vibration, thrust position, eccentricity and acceleration measurement with programmable alarms.

176449-03

3500/44M Aeroderivative GT Vibration Monitor

Bently Nevada 176449-03 is a 3500/44M four-channel vibration monitor with a 1 Hz to 10 kHz frequency range, built-in signal processing and trending, and alarm outputs for critical vibration levels.

176449-04

Position Monitor ModuleBently Nevada

3500/45 Position Monitor

Bently Nevada 176449-04 is a 3500/45 position monitor providing precise position monitoring for machinery protection applications.

176449-05

3500/64M Dynamic Pressure Monitor

Bently Nevada 176449-05 is a 3500/64M dynamic pressure monitor that accepts input from high-temperature pressure transducers and drives alarms; bandpass dynamic pressure per channel, 24 VDC, 12 W.

176449-06

Process AnalyzerBently Nevada

3500/46M Hydro Monitor

Bently Nevada 176449-06 is a 3500/46M four-channel hydro monitor accepting input from proximity, seismic and air-gap sensors, with user-programmable frequency response of 4-4000 Hz or 1-600 Hz.

176449-07

Pressure TransmitterBently Nevada

Reciprocating Cylinder Pressure Monitor

Bently Nevada 176449-07 is a 4-channel reciprocating cylinder pressure monitor accepting piezoelectric transducer inputs over 0-10,000 psi, ±0.25% accuracy, 4-20 mA output, 24 VDC supply.

176449-08

Position Monitor ModuleBently Nevada

3500/72M Recip Rod Position Monitor

Bently Nevada 176449-08 is a 3500/72M reciprocating rod position monitor, IP67 rated, 24 VDC input with 0-10 V DC output, for harsh industrial machinery protection.

176449-09

Velocity TransducerBently Nevada

3500/70M Recip Impulse/Velocity Monitor

Bently Nevada 176449-09 is a 3500/70M reciprocating impulse/velocity monitor accepting up to four seismic transducer inputs (10-100 mVrms), 3-30,000 Hz frequency range, with RS-232/485 and Ethernet communication.

176499-02

Thrust Position MonitorBently Nevada

Thrust Monitor Module

Bently Nevada 176499-02 is a thrust monitor module providing precise thrust measurement (0-200 kN, ±0.5% accuracy, 0.1 kN resolution) for machinery condition monitoring, rated -40°C to +85°C.

176499-03

Vibration Monitor ModuleBently Nevada

Overspeed Detection and Vibration Monitor Module

Bently Nevada 176499-03 is a 3500 series monitoring module for overspeed detection and vibration analysis, with four vibration input channels, configurable alarm setpoints and buffered signal outputs.

177230-00-01-05

Seismic Transmitter

Bently Nevada 177230-00-01-05 is a seismic transmitter with 0-12.7 mm/s (0-0.5 in/s) measurement range, 10 Hz to 1 kHz frequency response, multiple hazardous-area approvals, 12-30 VDC supply.

177230-01-01

Seismic Transmitter

Bently Nevada 177230-01-01 is a seismic transmitter for industrial vibration monitoring.

177230-01-01-00

Seismic Transmitter

Bently Nevada 177230-01-01-00 is a seismic transmitter with 0-25.4 mm/s (0-1.0 in/s) measurement range, 10 Hz to 1 kHz frequency response, 316L stainless steel case and 3-pin MIL-C-5015 connector.

177230-01-01-05

Seismic Transmitter

Bently Nevada 177230-01-01-05 is a seismic transmitter with 4-20 mA output signal, IP65 protection rating, 12-30 VDC supply, rated -40°C to 85°C.

177230-01-02

Seismic Transmitter

Bently Nevada 177230-01-02 is a seismic transmitter for industrial vibration monitoring.

177230-01-02-05

Seismic Transmitter

Bently Nevada 177230-01-02-05 is a loop-powered seismic transmitter with 4-20 mA output, IP65 rating, 0-25.4 mm/s range, 10 Hz to 1 kHz frequency response, for PLC/DCS/SCADA integration.

177230-02

Seismic Transmitter

Bently Nevada 177230-02 is a seismic transmitter with 0-50.8 mm/s (0-2.0 in/s) measurement range, 316L stainless steel case, 3-pin MIL-C-5015 connector, rated -40°C to +85°C.

177230-02-01-05

Seismic Transmitter

Bently Nevada 177230-02-01-05 is a seismic transmitter with 0-50.8 mm/s (0-2.0 in/s) measurement range, 10 Hz to 1 kHz frequency response, multiple hazardous-area approvals, 12-30 VDC supply.

177230-02-02-05

Seismic Transmitter

Bently Nevada 177230-02-02-05 is a seismic transmitter for industrial vibration monitoring.

177313-01-01-00

TK-3E Proximity System Test Kit

Bently Nevada 177313-01-01-00 is a TK-3E proximity transducer system test kit used for verifying and calibrating Bently Nevada proximity probe systems.

177313-02-02

TK-3E Proximity System Test Kit

Bently Nevada 177313-02-02 is a TK-3E proximity transducer system test kit for verifying and calibrating Bently Nevada proximity probe systems.

177313-02-02-00

TK-3E Proximity System Test Kit

Bently Nevada 177313-02-02-00 is a TK-3E proximity transducer system test kit for verifying and calibrating Bently Nevada proximity probe systems.

177314-02

TK-3G Air Driven Test Kit

Bently Nevada TK-3G air-driven proximity system test kit. Scale units metric, 90 psi (6.2 bar) maximum, max speed 0 to 5000 cpm, IP54, 95% non-condensing humidity. Made in U.S.A.

177896-01

Processor ModuleBently Nevada

3701/40 Processor Module

Bently Nevada 177896-01 is a 3701/40 processor module for the 3701 Series machinery protection system, supporting up to 12 dynamic signals and 2 Keyphasor/speed inputs with 24-bit Sigma-Delta conversion and 0.0625 Hz to 40 kHz bandwidth.

177896-05

Processor ModuleBently Nevada

ADAPT 3701/40 Processor Module

Bently Nevada 177896-05 is an ADAPT 3701/40 Machinery Dynamics Monitor processor module supporting up to 12 vibration channels (6 per input module) and dual Ethernet, optimized for gearboxes and roller-element-bearing machines.

177897-01

Relay Output ModuleBently Nevada

3701 Output Relay Module

Bently Nevada 177897-01 is a 3701 series output relay module providing solid-state relay outputs (up to 2 A per channel, NO/NC) for alarms, shutdowns and interlocks, with electrical isolation and DIN-rail or panel mounting.

177988-01

Analog Input ModuleBently Nevada

ADAPT 3701/44 Prox/Accel/Seismic Module

Bently Nevada 177988-01 is an ADAPT 3701/44 input module accepting proximity probe, accelerometer and seismic transducer signals to monitor radial vibration, thrust position and casing vibration, with up to 12 vibration channels and dual Ethernet.

177989-01

Analog Input ModuleBently Nevada

Prox/Accel/Velomitor Input Module

Bently Nevada 177989-01 is a four-channel input module accepting proximity probe, accelerometer and Velomitor velocity sensor signals, optimized for aeroderivative gas turbines, with bandpass, 1X tracking and integration filtering.

177990-01

Analog Input ModuleBently Nevada

Prox/Accel Aero Input Module

Bently Nevada 177990-01 is a Prox Accel Aero (PAA) input module supporting proximity probes and accelerometers for vibration and position monitoring on aerospace and high-speed rotating machinery, with Ethernet system integration.

178850-00

Vibration Monitor ModuleBently Nevada

Equipment Monitor Module

Bently Nevada 178850-00 is an equipment monitor module for industrial machinery condition monitoring.

178850-05

Proximity SensorBently Nevada

Proximity Sensor

Bently Nevada 178850-05 is a proximity sensor for machinery vibration and position monitoring.

1800/15-12-90-02-00

Vibration TransmitterBently Nevada

Relative Vibration Transmitter

Bently Nevada 1800/15-12-90-02-00 is a relative vibration transmitter with 0.1-100 mm/s RMS measurement range, 0.1-10 kHz frequency range, 4-20 mA output, Modbus RTU/Ethernet-IP communication and 24 VDC supply.

1800/20-12-90-02-00

TransmitterBently Nevada

Thrust Position Transmitter

Bently Nevada 1800/20-12-90-02-00 is an eddy-current thrust position transmitter with 0-10 mm measurement range, ±0.5% accuracy, 4-20 mA current loop output, rated -40°C to +85°C.

184139-10

Isolated Thermocouple Input Module

Bently Nevada 184139-10 is an isolated thermocouple input module for the 3500/60 temperature monitoring system, with configurable alarm thresholds and trip points for machinery protection.

184146-03

I/O Module

Bently Nevada 184146-03 is an I/O module for the 3500 system, providing connection between field devices and Bently Nevada monitoring systems for machine protection.

184826-01

HMI DisplayBently Nevada

3500/94M Display Monitor

Bently Nevada 184826-01 is a 3500/94M touchscreen display monitor (10-inch or 15-inch VGA) for the 3500 machinery protection system, showing vibration readings, proximity gap values, alarms and system events.

185310-01

Wireless ModuleBently Nevada

Wireless Sensor Interface Module

Bently Nevada 185310-01 is a wireless sensor interface module (wSIM) and repeater that extends ISA100.11a (IEC 62734) wireless networks at 2.4 GHz for vibration sensors, with optional IP65 protection.