Parts catalogue

Velomitor Interconnect Cable

The Bently Nevada 84661-75 is a Velomitor interconnect cable connecting Velomitor piezo-velocity sensors to monitoring systems. 2-conductor 22 AWG twisted shielded, 75 ft (22.86 m), 300V max rating, operating -40 C to +85 C.

84661-8

Velomitor Interconnect Cable

The Bently Nevada 84661-8 is a Velomitor interconnect cable for connecting velocity sensors to monitoring systems.

84661-90

Interconnect Cable

The Bently Nevada 84661-90 is an interconnect cable for Velomitor sensor and vibration monitoring systems.

84661-92

Interconnect Cable

The Bently Nevada 84661-92 is a shielded twisted-pair interconnect cable for Velomitor and 3500 Series systems. 24 cm length, 36-pin crimp connector, nylon insulation with aluminum shielding, 10 A current rating.

Contact for wholesale

84661-99

Interconnect Cable

The Bently Nevada 84661-99 is an interconnect cable for Velomitor sensor and vibration monitoring systems.

84933-02

Temperature Input ModuleBently Nevada

PLC / Six-Channel Temperature Status Monitor Module

The Bently Nevada 84933-02 is a six-channel temperature status monitor module used in machinery protection systems, monitoring temperature across six channels.

86517-01-01-01-02

Interface ModuleBently Nevada

Acceleration Interface Module

The Bently Nevada 86517-01-01-01-02 is an acceleration interface module (product type 159840-01). Transducer charge input sensitivity 50 pC/g, filter corners 25 Hz high pass / 350 Hz low pass, DC bias -10 Vdc, CENELEC (SIRA) approval. Made in USA.

86691-01250-0400-15

Proximity ProbeBently Nevada

Vibration Proximity Probe

The Bently Nevada 86691-01250-0400-15 is a proximity probe for non-contact shaft vibration measurement in rotating machinery.

86691-01780-1300-15

Proximity ProbeBently Nevada

Vibration Proximity Probe

The Bently Nevada 86691-01780-1300-15 is a proximity probe for non-contact shaft vibration measurement in rotating machinery.

86739-01

Vibration MonitorBently Nevada

3500/16 Dual Vibration Monitor

The Bently Nevada 86739-01 Dual Vibration Monitor is part of the 3500/16 series, providing continuous dual-channel monitoring of vibration levels in rotating machinery such as turbines and compressors. Rack-mounted, weight 2.8 kg. Made in USA.

87199-01

Vibration MonitorBently Nevada

Vibration Monitoring System

The Bently Nevada 87199-01 is a vibration monitoring system for detecting and diagnosing machinery faults, with alarm outputs, data logging, and integration with industrial control systems.

87870-01

Control BoardBently Nevada

Circuit Board (PWA)

The Bently Nevada 87870-01 is a PWA circuit board for industrial monitoring systems providing real-time data acquisition and control. RS-485 interface, 12V DC input, operating -40 C to +85 C. UL, CE certified.

87890-01

Machinery Protection ModuleBently Nevada

3500 System Monitor Module

The Bently Nevada 87890-01 System Monitor is a key module in the 3500 series machinery protection system, providing centralized monitoring, diagnostics, and communication management for the rack. Rack-mounted, serial and network interfaces. Made in USA.

87900-01

Vibration Monitor ModuleBently Nevada

Vibration Severity Module

The Bently Nevada 87900-01 Vibration Severity Module (VSM) monitors up to 4 vibration channels with programmable alarm and shutdown levels and peak/RMS vibration measurement. CE certified.

87900-02

Proximitor Probe Extension Cable

The Bently Nevada 87900-02 is a Proximitor probe extension cable connecting Proximitors to vibration monitoring systems and data collectors. Designed for Bently Nevada Proximitor probes.

87971-01

Vibration MonitorBently Nevada

Dual Vibration Monitor

The Bently Nevada 87971-01 is a dual vibration monitor measuring two independent channels of radial vibration and average shaft position. Measurement range 0-10 mils peak-to-peak, transducer inputs for 3300 8 mm, 3300 XL 8 mm, or 7200 5/8 mm probes, quad relay alarm option. Made in USA.

88149-01

Relay Output ModuleBently Nevada

Alarm Relay Outputs Assembly Module

The Bently Nevada 88149-01 is an alarm relay outputs assembly module for the 3300/3500 series machinery protection systems.

88194-01

Power SupplyBently Nevada

3300/12 Power Supply Unit

The Bently Nevada 88194-01 is a power supply unit for the 3300/12 machinery protection system, providing real-time monitoring of power supply health. Made in USA, individually boxed.

88199-01

Machinery Protection ModuleBently Nevada

3300 Series Rear Control Panel

Bently Nevada 88199-01 rear control panel for the 3300 Series machinery protection monitoring system. Provides continuous online monitoring for machinery protection applications. Made in USA.

88286-01J

Machinery Protection ModuleBently Nevada

3300 Series Monitor Module

Bently Nevada 88286-01J module for the 3300 Series machinery monitoring system.

88984-01

Relay Output ModuleBently Nevada

Signal Input Relay Card

Bently Nevada 88984-01 signal input relay card for the 3300 Series monitoring system. Dual-channel design with effective signal isolation, user-programmable sensitivity (200 mV/mil or 100 mV/mil), four configurable relay outputs and four alarm outputs. Made in USA.

88984-02

Relay Output ModuleBently Nevada

Input Relay Option Card

Bently Nevada 88984-02 input relay option card for the 3300 Series monitoring system. Provides flexible alarm and trip relay outputs with dual normally-open relays and response time under 10 ms for demanding industrial environments.

89477-30

Cable AssemblyBently Nevada

Interconnect Cable

Bently Nevada 89477-30 interconnect cable for industrial monitoring systems. Shielded 2-conductor 18 AWG twisted cable, 30 ft (approx 9.0 m), with a right-angle 2-socket plug at one end and terminal lugs at the other. Made in USA.

89998-01

Interface ModuleBently Nevada

Serial Data Interface Module

Bently Nevada 89998-01 serial data interface module for the 3300 Series monitoring system. Facilitates serial communication and data transfer between system components for monitoring and diagnostics.

900800XL-090-03-01

Proximity ProbeBently Nevada

Proximity Probe

Bently Nevada 900800XL series proximity probe (configuration 090-03-01) for non-contact vibration and position monitoring.

901100-90-03

Extension CableBently Nevada

Probe Extension Cable

Bently Nevada 901100 series probe extension cable (configuration 90-03) for proximity probe and Proximitor sensor connections.

9200-01-01-01-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer for vibration monitoring. Mounting angle/minimum operating frequency 0 deg, 4.5 Hz; top-mount connector; circular 1/4-20 UNC stud mounting base.

9200-01-01-02-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Side-mount connector (no cable), 1/4-28 UNF stud mounting base, anodized aluminum A204 casing; approx 41 mm diameter, 102 mm height.

9200-01-01-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Top-mount connector, circular M10x1 stud mounting base. Made in USA.

9200-01-02-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Side-mount connector (no cable), anodized aluminum A204 casing; approx 41 mm diameter, 102 mm height.

9200-01-05-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Terminal-block top-mount connector, circular M10x1 stud mounting base. Made in USA.

9200-01-20-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer (configuration 01-20-10-00).

9200-02-01-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer (configuration 02-01-10-00) for industrial vibration monitoring.

9200-03-01-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer (configuration 03-01-10-00) for industrial vibration monitoring.

9200-03-02-02-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Mounting angle 90 deg, 4.5 Hz; side-mount connector; circular 1/4-28 UNF stud base. Made in USA.

9200-03-02-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Mounting angle 90 deg, 4.5 Hz; side-mount connector (no cable); circular M10x1 stud base. Made in USA.

9200-03-05-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Mounting angle 90 deg, 4.5 Hz; terminal-block top-mount connector; circular 1/4-20 UNC stud base. Made in USA. Can be used with the 9513 VDC (ordered separately).

9200-03-06-10-00

Seismoprobe Velocity Transducer

Bently Nevada 9200 Series Seismoprobe velocity transducer for industrial vibration monitoring. Measurement range 0 to 100 mm/s RMS, frequency range 2 to 1000 Hz, 4-20 mA analog output, sensitivity 10 mV/g, operating temperature -40 to +121 C.

9200-06-01-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Mounting angle 0 deg, 10 Hz; top-mount connector (no cable); circular M10x1 stud base; anodized aluminum A204 casing. Made in USA.

9200-06-01-11-04

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Mounting angle 0 deg, 10 Hz; top-mount connector (no cable); isolated circular M10x1 base; ATEX/IECEx approved. Made in USA.

9200-06-02-01-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Mounting angle 0 deg, 10 Hz; side-mount connector; circular 1/4-20 UNC stud base; anodized aluminum A204 casing.

9200-06-02-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Mounting angle 0 deg, 10 Hz; side-mount connector; circular M10x1 stud base; anodized aluminum A204 casing. Made in USA.

9200-06-05-01-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer (configuration 06-05-01-00).

9200-06-05-05-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Terminal-block top-mount connector; no base, 1/2-20 UNF-3A stud; anodized aluminum A204 casing. Made in USA.

9200-06-05-10-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer. Mounting angle 0 deg, 10 Hz; terminal-block top-mount connector; circular M10x1 stud base. Made in USA.

9200-09-01-01-00

Two-Wire Velocity Seismoprobe Transducer

Bently Nevada 9200 Series two-wire velocity Seismoprobe transducer for measuring vibration on rotating machinery. Sensitivity 20 mV/mm/s, circular M10x1 metric thread, CE certified.

9571-24

Cable AssemblyBently Nevada

Interconnect Cable

Bently Nevada 9571 series interconnect cable (length code 24) for machinery condition monitoring systems.

9571-32

Cable AssemblyBently Nevada

Interconnect Cable

Bently Nevada 9571-32 interconnect cable for machinery condition monitoring systems. 10 m (32.8 ft), 18 AWG copper conductor, foil shielded. Connects sensors, transmitters and monitoring equipment.