Double-slot VME controller board for the GE Mark VI innovation series, designed for gas turbine control. Pentium III 850 MHz, 32 MB DRAM, 16/128 MB flash, dual 10/100BaseT Ethernet, QNX OS.

Contact for wholesale

IS215UCVGH1A

ControllerGE Fanuc

Controller Card

UCVG controller card for the GE Mark VI control system.

Contact for wholesale

IS215UCVGH1AC

Control BoardGE Fanuc

Controller Board

UCVG controller board for the GE Mark VI control system.

Contact for wholesale

IS215VAMBH1A

Control BoardGE Fanuc

Acoustic Monitoring Card Assembly

VAMB acoustic monitoring card assembly for the GE Mark VI control system.

Contact for wholesale

IS215VCM1H2CC

Communication ModuleGE Fanuc

Communication Card

VCMI communication card for the GE Mark VI control system.

Contact for wholesale

IS215VCMIH2B

Control BoardGE Fanuc

VME Communication Interface Card

VCMI VME communication interface card for the GE Mark VI control system.

Contact for wholesale

IS215VCMIH2BB

Control BoardGE Fanuc

VME Communication Interface Card

VME bus master controller / communication interface board for the GE Mark VI gas turbine control system. TI TMS320C32 32-bit DSP, 32 KB dual-port memory, three IONet 10Base2 ports, one RS-232C serial port.

Contact for wholesale

IS215VCMIH2BE

Control BoardGeneral Electric

Mark VIe VME Bus Master Controller Board (VCMI)

GE Mark VIe Series VME Bus Master Controller (VCMI) board for Distributed Turbine Control Systems. Acts as the communication interface between the controller and the I/O boards over the IONet control network, serving as the VME bus master within the control and I/O racks and managing board IDs. 6U VME board, 24 V DC excitation, manual reference GEH-6421M.

Contact for wholesale

IS215VCMIH2C

Control BoardGeneral Electric

Mark VI VME Bus Master Controller Board (VCMI)

GE Mark VI Series VME Bus Master Controller (VCMI) board for GE Speedtronic Control Systems. 6U board with 32-bit processor, 12 channels, dual-port memory, 0-20 mA analog output, +5 V DC power, 10 ms frame rate.

Contact for wholesale

IS215VCMIH2CA

Control BoardGeneral Electric

VME Bus Master Controller Board (VCMI)

GE Mark VI/VIe VME Bus Master Controller (VCMI) board, revision H2CA.

Contact for wholesale

IS215VCMIH2CC

Control BoardGeneral Electric

VME Bus Master Controller Board (VCMI)

GE Mark VI/VIe VME Bus Master Controller (VCMI) board, revision H2CC.

Contact for wholesale

IS215VPROH1BE

Control BoardGeneral Electric

Turbine Protection Board (VPRO)

GE Mark VI Series VPRO emergency overspeed turbine protection board.

Contact for wholesale

IS215VPROH2B

Control BoardGeneral Electric

Turbine Protection Board (VPRO)

GE Mark VI Series VPRO turbine protection board for GE Speedtronic gas turbine control systems. Functions as an independent emergency overspeed protection system with the TPRO and TREG terminal boards, controlling trip solenoids via TREG. 3 inputs, 6 outputs, 125 V DC supply, surface-mount, manual GEH-6421H.

Contact for wholesale

IS215VPROH2BC

Control BoardGeneral Electric

Turbine Protection Board (VPRO)

GE Mark VI Series VPRO turbine protection board, revision H2BC.

Contact for wholesale

IS215WEMAH1BA

Control BoardGeneral Electric

Wind Energy Main Cabinet Board (WEMA)

GE Mark VIe wind energy main cabinet board for GE Distributed Control Systems used in renewable energy (wind/solar) systems, managing input and output of signals and data. 24 V outputs, surface-mount, 0-20 mA analog output, manual GEI-100746.

Contact for wholesale

IS215WEMAH1BB

Control BoardGeneral Electric

Wind Energy Main Cabinet Board (WEMA)

GE Mark VIe wind energy main cabinet board, revision H1BB.

Contact for wholesale

IS215WEPAH1BD

Control ModuleGeneral Electric

Wind Energy Pitch Axis Module (WEPA)

GE Mark VIe wind energy pitch axis module for wind turbine pitch control. Supports simplex and triple-redundant configurations. Ambient range -40 to +70 C, COM1/COM2 plus micro-miniature 9-pin D connector, 10BaseT/AUI Ethernet, conformal coated.

Contact for wholesale

IS215WEPAH2BA

Control ModuleGeneral Electric

Wind Energy Pitch Axis Module (WEPA)

GE Mark VI wind energy pitch axis control board module. Supports a range of I/O modules and communication options for turbine pitch control.

Contact for wholesale

IS215WEPAH2BB

Control BoardGeneral Electric

Wind Energy Pitch Axis Module (WEPA)

GE Mark VI WEPA printed circuit board for wind energy applications. Supports simplex and triple-redundant configurations. IONet/UDH communication, up to 20 female plug connectors (2-20 pins), 4 metal oxide varistors, 125 VDC supply, occupies a single VME rack slot.

Contact for wholesale

IS215WEPAH2BD

Control BoardGeneral Electric

Wind Energy Pitch Axis Module (WEPA)

GE Mark VIe WEPA printed circuit board. 3 COM ports (COM1, COM2, micro-miniature 9-pin D connector), 10BaseT/AUI Ethernet, 4 metal oxide varistors, 125 VDC supply, manual GEP-9145.

Contact for wholesale

IS220PAICH1A

Analog I/O ModuleGeneral Electric

Analog I/O Pack (PAIC)

GE Mark VIe PAIC analog I/O pack for GE Speedtronic control systems. Connects one or two I/O Ethernet networks to an analog input terminal board. Power 27.4-28.6 VDC, ambient -30 to 65 C, UL/ATEX certified.

Contact for wholesale

IS220PAICH1AD

Analog I/O ModuleGeneral Electric

Analog I/O Pack (PAIC)

GE Mark VIe PAIC analog I/O pack, revision H1AD.

Contact for wholesale

IS220PAICH1B

Analog I/O ModuleGeneral Electric

Analog Input/Output Module (PAIC)

GE Mark VI PAIC analog I/O pack for the Speedtronic Turbine Control System, used in GE gas, steam and wind turbine drive assemblies. Ambient -40 to 158 F, analog transmitter power 22.8 VDC, ATEX Zone 2 / UL certified.

Contact for wholesale

IS220PAICH1BG

Analog I/O ModuleGeneral Electric

Analog Input/Output Module (PAIC)

GE Mark VIe PAIC analog I/O pack. Up to 10 analog inputs, first 8 channels configurable as +/-5 V, +/-10 V or 0-20 mA, dual Ethernet interface, dimensions 13.3 x 7.08 x 3.93 cm.

Contact for wholesale

IS220PAICH2A

Analog I/O ModuleGeneral Electric

Analog I/O Module (PAIC)

GE Mark VIe Speedtronic PAIC analog I/O pack. Electrical interface connecting one or two I/O Ethernet networks to an analog input terminal board via a single DC-37 pin connector. Includes a BPPx processor board and an analog I/O acquisition board; ten analog inputs.

Contact for wholesale

IS220PAICH2B

Terminal BoardGeneral Electric

Thermocouple Analog I/O Terminal Board (PAIC)

GE Mark VI thermocouple analog I/O terminal board for GE Speedtronic gas turbine control systems. Interfaces analog inputs with Ethernet networks via the PAIC I/O pack. 12 analog input channels, +5 VDC at 6 A, QNX OS, manual GEH-6721 Vol II.

Contact for wholesale

IS220PAOCH1A

Analog Output ModuleGeneral Electric

Analog Output Module (PAOC)

GE Mark VIe / VIeS PAOC analog output module providing 8 independent current loop outputs (0-20 mA, up to 900 ohm loads), +/-0.5% accuracy from -30 to +65 C, dual RJ-45 Ethernet for IONet. Compatible terminal boards TBAOH1C, STAOH1A, STAOH2A.

Contact for wholesale

IS220PAOCH1B

Analog Output ModuleGeneral Electric

Analog Output Module (PAOC)

GE Mark VIe / VIeS PAOC analog output module providing precise current-based control signals to field devices such as actuators and valves. 8 analog outputs, galvanic isolation per channel, conformal-coated PCB. Compatible terminal board IS230SNAOH2A.

Contact for wholesale

IS220PAOCH1BE

Analog Output ModuleGeneral Electric

Analog Output Module (PAOC)

GE Mark VIe PAOC analog output unit, revision H1BE.

Contact for wholesale

IS220PAOCHA1A

Analog Output ModuleGeneral Electric

Analog Output Module (PAOC)

GE Mark VIe PAOC analog output module, revision HA1A.

Contact for wholesale

IS220PAZCH1B

I/O ModuleGeneral Electric

Turbine Control I/O Module (PAZC)

GE Mark VIe PAZC I/O module for turbine control systems.

Contact for wholesale

IS220PCLAH1A

Analog I/O ModuleGeneral Electric

Core Analog I/O Module (PCLA)

GE Mark VIe PCLA core analog I/O module for distributed control systems, used in aero-derivative gas turbines to supply most analog signal I/O for engine operation. 4 channels, 16-bit A/D, 28 V DC input, 19.8 W max, manual GEH-6721L.

Contact for wholesale

IS220PCLAH1B

Analog I/O ModuleGeneral Electric

Core Analog I/O Module (PCLA)

GE Mark VIe PCLA core analog I/O module supporting analog and digital signals. 24 analog inputs, 8 analog outputs, -20 mA to +20 mA input range, 16-bit acquisition, 2500 V DC isolation.

Contact for wholesale

IS220PD0AH1A

I/O ModuleGeneral Electric

I/O Pack Module

GE Mark VIe I/O pack module.

Contact for wholesale

IS220PDIAH1A

I/O ModuleGeneral Electric

Discrete Contact Input Terminal Board (PDIA)

GE Speedtronic Mark VIe PDIA I/O pack / discrete contact input board for gas turbine control systems. Metal housing, 24V DC input/output.

Contact for wholesale

IS220PDIAH1AD

I/O ModuleGeneral Electric

Discrete Contact Input Module (PDIA)

GE Mark VIe PDIA discrete contact input module, revision H1AD.

Contact for wholesale

IS220PDIAH1B

Digital Input ModuleGeneral Electric

Discrete Contact Input Module (PDIA)

GE Mark VIe PDIA discrete contact input module. Contact input 0-32 VDC, wetting voltage 18.5-32 VDC, 24 contact inputs, 1000 MOhm insulation, 2500 VAC dielectric, IP20.

Contact for wholesale

IS220PDIAH1BB

Digital Input ModuleGeneral Electric

Discrete Contact Input Module (PDIA)

GE Mark VIe PDIA discrete contact input module, revision H1BB.

Contact for wholesale

IS220PDIAH1BC

Digital Input ModuleGeneral Electric

Discrete Contact Input Module (PDIA)

GE Mark VIe PDIA discrete contact input module, revision H1BC.

Contact for wholesale

IS220PDIOH1A

I/O ModuleGeneral Electric

Discrete Input/Output Module (PDIO)

GE Mark VIe PDIO discrete I/O module for distributed control systems. Provides the electrical connection between one or two I/O Ethernet networks and a discrete I/O terminal board. Includes a discrete-I/O acquisition board and the common Mark VIe processor board. Manual GEH-6721L.

Contact for wholesale

IS220PDIOH1B

I/O ModuleGeneral Electric

Discrete Input/Output Module (PDIO)

GE Mark VIe PDIO discrete I/O module for gas turbine control, revision H1B.

Contact for wholesale

IS220PDIOS1A

I/O ModuleGeneral Electric

Discrete Input/Output Module (PDIO)

GE Mark VIeS PDIO discrete I/O module, revision S1A.

Contact for wholesale

IS220PDOA1BC

Digital Output ModuleGeneral Electric

Discrete Output Module (PDOA)

GE Mark VIe PDOA discrete output module, revision 1BC.

Contact for wholesale

IS220PDOAH1A

Digital Output ModuleGeneral Electric

Discrete Output Module (PDOA)

GE Mark VI PDOA discrete output module, revision H1A.

Contact for wholesale

IS220PDOAH1B

Digital Output ModuleGeneral Electric

Discrete Output Pack (PDOA)

GE Mark VIe PDOA discrete output pack providing the electrical connection between one or two I/O Ethernet networks and a discrete output terminal board. 12 relay channels, 15 pack inputs for relay/coil monitoring, surface-mount, made in USA.

Contact for wholesale

IS220PDOAH1BC

Digital Output ModuleGeneral Electric

Discrete Output Module (PDOA)

GE Mark VIe PDOA discrete output module, revision H1BC.

Contact for wholesale

PreviousPage 36 / 41Next