Parts catalogue

Generator I/O Pack (PGEN)

GE Mark VIe PGEN generator I/O pack.

IS220PHRAH1B

Analog I/O ModuleGeneral Electric

HART-Enabled Analog I/O Pack (PHRA)

GE Mark VIe / VIeS PHRA HART-enabled analog input/output I/O pack. Interfaces Ethernet I/O networks and analog terminal boards. Up to 10 analog inputs and 2 analog outputs, 16-bit A/D, HART bidirectional field-device communication, works with IS200SHRA terminal boards.

IS220POIAH1BB

Analog I/O ModuleGeneral Electric

Analog I/O Pack (POIA)

GE Mark VIe POIA analog I/O pack, revision H1BB.

IS220PPRAH1A

Emergency Turbine Backup Protection I/O Module (PPRA)

GE Mark VIeS PPRA emergency turbine backup protection I/O module for GE Distributed Turbine Control Systems. Works with the TREA terminal board to provide an independent backup overspeed protection system.

Contact for wholesale

IS220PPRAS1A

Terminal BoardGeneral Electric

Emergency Turbine Protection Terminal Board (PPRA)

GE Mark VIe PPRA emergency turbine protection terminal board providing backup overspeed protection and emergency trip functionality. Surface-mount, IONet Ethernet, works with TREA and WREA boards; IEC 61508/61511 certified versions available.

IS220PPRFH1A

PROFIBUS Master Gateway Analog I/O Pack (PPRF)

GE Mark VIe PPRF PROFIBUS master gateway analog I/O pack, revision H1A.

IS220PPRFH1B

PROFIBUS Master Gateway I/O Module (PPRF)

GE Mark VIe PPRF PROFIBUS master gateway I/O module acting as a gateway between Mark VIe controllers and PROFIBUS slave devices in gas, steam and wind turbine control systems. 28 Vdc nominal, PROFIBUS DPV0 Class 1 master, 9.6 kBaud to 12 MBaud, ATEX Zone 2, UL E207685.

IS220PPROH1A

Backup Turbine Protection I/O Pack (PPRO)

GE Mark VIe PPRO backup turbine protection I/O pack, providing backup overspeed protection within GE turbine control systems.

IS220PPROS1B

Emergency Turbine Protection I/O Pack (PPRO)

GE Mark VIe PPRO emergency turbine protection I/O pack. Provides a backup overspeed protection system and a backup check for generator synchronization to a utility bus, and acts as the independent watchdog for the primary control system.

IS220PPRQH1A

ControllerGeneral Electric

Turbine Control Module (PPRQ)

GE Mark VIe PPRQ turbine control module.

IS220PRROH1A

Control BoardGeneral Electric

Turbine Control Circuit Board (PRRO)

GE Mark VIe PRRO printed circuit board for turbine control systems.

IS220PRTDH1A

RTD Input ModuleGeneral Electric

RTD Input Module (PRTD)

GE Mark VIe PRTD RTD input module for the Speedtronic system managing gas and steam turbines. 8-channel input module for RTDs, CE/UL listed, manual GEH-6721L; approved for hazardous locations with terminal boards IS200TRTDH2D/SRTDH1A/SRTDH2A.

IS220PRTDH1AD

RTD Input ModuleGeneral Electric

RTD Input Module (PRTD)

GE Mark VIe PRTD RTD input module, revision H1AD.

IS220PRTDH1B

RTD Input ModuleGeneral Electric

RTD Input Module (PRTD)

GE Speedtronic Mark VIe PRTD RTD input module interfacing one or two I/O Ethernet networks with an RTD input terminal board. Platinum RTD sensor, supports up to 128 RTDs, 14-bit A/D, 15 ohm max lead resistance, output 4-20 mA / HART / Modbus RTU.

IS220PSCAH1A

Serial Communication I/O Pack (PSCA)

GE Mark VIe PSCA serial communication I/O pack for gas turbine control systems.

IS220PSCAH1B

Serial Communication I/O Pack (PSCA)

GE Mark VIe PSCA serial communication I/O pack for gas turbine controls, revision H1B.

IS220PTCCH1A

Thermocouple Input ModuleGeneral Electric

Thermocouple Input Module (PTCC)

GE Mark VIe PTCC thermocouple input module for GE Distributed Control Systems. Electrical interface between one or two I/O Ethernet networks and a thermocouple input terminal board. 12 channels, 16-bit A/D, AMD-K6 300 MHz, manual GEH-6721D.

IS220PTCCH1B

Thermocouple Input ModuleGeneral Electric

Thermocouple Input Module (PTCC)

GE Mark VIe PTCC thermocouple input module, revision H1B.

IS220PTCCH2BB

Thermocouple Input ModuleGeneral Electric

Thermocouple Input Pack (PTCC)

GE Mark VIe PTCC thermocouple input pack for precise temperature monitoring; digitizes thermocouple signals and transmits them to the controller. Up to 24 thermocouple inputs via TBTCH1B terminal board, +/-0.5 C typical, galvanic isolation per channel, 24 VDC.

IS220PTURH1A

Turbine Primary Trip I/O Module (PTUR)

GE Energy Mark VI PTUR turbine-specific primary trip I/O module for turbine control applications. 24V DC, operating range -40 to 85 C.

IS220PTURH1AD

Turbine Primary Trip I/O Module (PTUR)

GE Mark VI PTUR turbine-specific primary trip I/O module, revision H1AD.

IS220PTURH1B

Turbine-Specific Primary I/O Trip Pack (PTUR)

GE Energy Mark VI Speedtronic PTUR turbine-specific primary I/O trip pack, an updated functional revision (B) of the IS220PTURH1 board. Conformal coated.

IS220STAIH2ACB

Analog Input ModuleGeneral Electric

Advanced Analog Input Module (STAI)

GE Mark VIe STAI analog input module. 8 differential analog input channels, +/-5V/+/-10V/0-20mA/4-20mA input range, 16-bit ADC, 28V DC nominal, Ethernet connectivity, overvoltage/short-circuit/surge protection.

IS220UCSAH1A

ControllerGeneral Electric

Embedded Controller Module (UCSA)

GE Mark VIe UCSA embedded controller module for GE Distributed Gas Turbine Control Systems. Stand-alone computer executing application code and interfacing with I/O packs via onboard IONet. 256 MB DDR SDRAM, Freescale Power PC (PowerQUICC II Pro, 667 MHz), QNX Neutrino OS, +18 to +32 V DC.

IS220YAICS1A

Analog I/O ModuleGeneral Electric

Analog Input I/O Pack (YAIC)

GE Mark VIeS YAIC analog input I/O pack for Speedtronic turbine control systems.

IS220YAICS1AJ

Analog/Discrete Contact I/O Module (YAIC)

GE Mark VI/VIe YAIC I/O module for Speedtronic turbine control. Processes and distributes analog inputs and outputs. 28V DC, dual RJ-45 Ethernet plus DC-37 pin connector, 0.6 kg.

IS220YDIAS1A

Discrete Contact Input I/O Module (YDIA)

GE Mark VIeS YDIA discrete contact input I/O module for turbine control systems.

IS220YDIAS1AK

Discrete Contact Input I/O Module (YDIA)

GE Mark VIe YDIA discrete input module for processing digital signals in industrial control systems. 28V DC, electrical isolation, operating range -40 to +85 C.

IS220YDOAS1A

Discrete Output I/O Pack (YDOA)

GE Mark VIeS YDOA discrete output I/O pack for turbine control systems.

IS220YDOAS1AJ

Safety Discrete Output I/O Pack (YDOA)

GE Mark VIeS YDOA discrete output module distributing digital outputs in turbine control systems. 28V DC, dual RJ-45 Ethernet plus DC-37 pin connector, 0.6 kg.

IS220YDOAS1AK

Discrete Output I/O Pack (YDOA)

GE Mark VIeS YDOA discrete output I/O pack, revision S1AK.

IS220YTURS1A

Turbine Primary Trip I/O Pack (YTUR)

GE Mark VIeS YTUR turbine-specific primary trip I/O pack for turbine control systems.

IS230JPDMG1B

Terminal BoardGeneral Electric

Power Distribution Terminal Board (JPDM)

GE Mark VIe JPDM power distribution terminal board.

IS230PCAAH1A

Speedtronic Turbine Control I/O Pack (PCAA)

GE Speedtronic Mark VIe PCAA turbine control I/O pack.

IS230SNAIH2A

Analog DIN Rail Input/Output Module

The IS230SNAIH2A is an analog DIN-rail input/output module from the GE Mark VIe distributed turbine control system. It accepts analog input signals such as voltage, current, resistance, and temperature from field sensors.

IS230SNAIH4A

Analog Input Terminal Board

The IS230SNAIH4A is an analog input I/O pack for the GE Mark VIe turbine control system, pairing with the IS200STAIH2A terminal board.

IS230SNAOH2A

Analog Output I/O Module

The IS230SNAOH2A is an analog output I/O pack for the GE Mark VIe turbine control system.

IS230SNCIH2A

Digital Input ModuleGE Fanuc

Simplex Digital Input DIN Rail Module

The IS230SNCIH2A is a simplex digital input DIN-rail module for the GE Mark VIe control system. It receives and processes digital input signals from field devices such as switches and sensors.

IS230SNHRH2A

HART-Enabled Analog I/O Module

The IS230SNHRH2A is a HART-enabled analog I/O module for the GE Mark VIe and Mark VIeS control systems, supporting both analog input and output operations with HART smart-device communication. DIN-rail mounted, approx. 424 mm x 130 mm.

IS230SNRLH2A

Turbine Control I/O Pack

The IS230SNRLH2A is an I/O pack for the GE Mark VIe gas turbine control system.

IS230SNRTH2A

RTD Input I/O Pack

The IS230SNRTH2A is an RTD input I/O pack for the GE Mark VIe turbine control system.

IS230SRLYH2A

Relay Output Terminal Board

The IS230SRLYH2A is a relay output terminal board for the GE Mark VI / Mark VIe control system.

IS230SRTDH2A

RTD Input Terminal Board

The IS230SRTDH2A is a multilayer PCB terminal board with external I/O termination for the GE Mark VIe control system, used in simplex, dual and triple-redundant configurations.

IS230STCIH4A

Contact Input Assembly

The IS230STCIH4A is a contact input assembly for the GE Mark VIe turbine control system.

IS230TAISH2C

TMR DIN Rail Analog Input Assembly Board

The IS230TAISH2C is a TMR (Triple Modular Redundancy) DIN-rail analog input assembly board for the GE Mark VIe control system, providing fault-tolerant operation for mission-critical applications.

IS230TCISH6C

DIN Rail Contact Input I/O Module

The IS230TCISH6C is a DIN-rail I/O module for the GE Mark VIe distributed control system used in turbine and plant control. Surface-mount technology, 12 relays, 4 ms hardware input filter.

IS230TNDSH2A

Discrete I/O Terminal Board

The IS230TNDSH2A is a discrete I/O terminal board for the GE Mark VIe Speedtronic turbine control system, interfacing field devices such as limit switches, solenoids and relays. 16 discrete inputs (24V DC), 500V DC isolation.

IS230TRLSH2B

Digital Output ModuleGE Fanuc

Relay Output Module

The IS230TRLSH2B is a relay output module for the GE Mark VIe control system, providing relay-based switching and output control for turbine and process control applications.