Parts catalogue

Relay Output Terminal Board

The IS230TRLYH1B is a relay output terminal board for the GE Mark VIe turbine control system.

IS230TVBAH4A

Contact Terminal Board

The IS230TVBAH4A is a contact terminal board for the GE Mark VIe turbine control system, providing reliable signal connections for gas and steam turbine applications. DIN-rail mounted, operating range 0 to +70 C.

IS239TRLYH1B

Relay Output Terminal Board

The IS239TRLYH1B is a relay output terminal board for the GE Mark VIe turbine control system.

IS400AEBMH1AJD

Mark VIe I/O Pack

The IS400AEBMH1AJD is an I/O pack for the GE Mark VIe control system.

Contact for wholesale

IS400AEBMH3A

Programmable Logic Controller

The IS400AEBMH3A is a programmable controller from GE, offering modular I/O expansion and communication over Ethernet, DeviceNet and Profibus. Dimensions 72 x 36 x 85 mm.

IS400TCASH1AGD

Thermocouple Input I/O Pack

The IS400TCASH1AGD is a thermocouple analog input I/O pack for the GE Mark VIe control system.

IS400UCLIH1A

Control ModuleGE Fanuc

Application Control Layer Module

The IS400UCLIH1A is an industrial control layer module from GE supporting Ethernet, serial and fieldbus communication, hot-plug operation and modular expansion. 72 x 36 x 85 mm, 24V, 0.35 kg.

IS415UCVHH1A

VME Innovation Series Controller Board

The IS415UCVHH1A is a VME controller board for the GE Mark VIe / Innovation Series, running QNX on an Intel Ultra Low Voltage Celeron 650 MHz with 128 MB SDRAM. Power 200-250 Vac, 6 channels.

IS415UCVHH1AB

VME Control Board

The IS415UCVHH1AB is a VME control board for the GE Mark VIe / Innovation Series controller, a hardware revision of the IS415UCVHH1A.

IS420ESWAH1A

Industrial Ethernet IONet Switch

The IS420ESWAH1A is an industrial Ethernet IONet switch for the GE Mark VIe and Mark VIeS turbine control systems, with fiber port connectivity.

IS420ESWAH2A

Industrial Ethernet Switch

The IS420ESWAH2A is an unmanaged industrial Ethernet switch for the GE Mark VIe and Mark VIeS turbine control systems. 8 x 10/100BASE-TX copper ports, 2 x 100BASE-FX fiber ports, DIN-rail mounted.

IS420ESWAH3A

IONet Ethernet Switch

The IS420ESWAH3A is an IONet Ethernet switch for the GE Mark VIe gas turbine control system, using Achilles-certified controllers and meeting NERC Version 5 reliability standards.

IS420ESWBH1A

Ethernet IONet Switch with Fiber

The IS420ESWBH1A is an ESWB Ethernet IONet switch with fiber port for the GE Mark VIe turbine control system.

IS420ESWBH1AE

Ethernet IONet Switch

The IS420ESWBH1AE is the second hardware version of the GE Mark VIe ESWB IONet switch, with sixteen 10/100BASE-TX RJ45 copper ports and one multi-mode 100BASE-FX fiber port (LC connector). Output 24/28 VDC.

IS420ESWBH2A

Ethernet IONet Switch

The IS420ESWBH2A is an unmanaged industrial Ethernet IONet switch for the GE Mark VIe and Mark VIeS turbine control systems.

IS420ESWBH3A

Ethernet IONet Switch

The IS420ESWBH3A is an 8-port Ethernet IONet switch (10/100BASE-TX) for the GE Mark VIe distributed gas turbine control system. 138 x 86 x 56 mm, 256 MB DDR SDRAM, QNX Neutrino.

IS420ESWBH3AE

16-Port Ethernet IONet Switch

The IS420ESWBH3AE is a 16-port 10/100BASE Ethernet IONet switch for the GE Mark VIe distributed gas turbine control system.

IS420ESWBH5A

Ethernet IONet Switch

The IS420ESWBH5A is an Ethernet IONet switch for the GE Mark VIeS distributed control system, connecting multiple devices over a LAN.

IS420PPNGH1A

PROFINET Gateway Module

The IS420PPNGH1A is a PROFINET gateway module for the GE Mark VIe / Mark VIeS Speedtronic turbine control system, connecting Mark VIe controllers to a PROFINET LAN. 1066 MHz EP80579 Intel processor.

IS420PUAAH1A

Universal Input/Output Pack

The IS420PUAAH1A is a universal input/output I/O pack for the GE Mark VIe / Mark VIeS control system, used in distributed and balance-of-plant control. Similar to the YUAA board in Mark VIeS.

IS420UCECH1B

Quad Core Mark VIe Controller

The IS420UCECH1B is a quad-core controller for the GE Mark VIe distributed control system, running QNX Neutrino with 4 GB DDR3 SDRAM and 5 Ethernet ports, supporting simplex, dual and TMR redundancy.

IS420UCSBH1A

UCSB Mark VIe Safety Controller

The IS420UCSBH1A is the first UCSB controller for the GE Mark VIe Control Safety System, also used in EX2100e and LS2100e environments. Intel EP80579 600 MHz, compact fanless design, ATEX Zone 2, 24/28 VDC.

IS420UCSBH3A

UCSB Controller Module

The IS420UCSBH3A is a UCSB controller module for the GE Mark VIe series, a stand-alone computer running application control logic with access to all I/O networks without hosting I/O on a backplane.

IS420UCSBH4A

UCSB Controller Module

The IS420UCSBH4A is a high-performance UCSB controller module for the GE Mark VIe control system, used in gas and steam turbine applications. Intel EP80579 1066 MHz, 256 MB DDR2 SDRAM, QNX Neutrino, supports simplex and TMR.

IS420UCSBS1A

UCSB Safety Controller Module

The IS420UCSBS1A is a UCSB safety controller module for the GE Mark VIeS control system.

IS420UCSCH1A

Speedtronic Turbine Controller

The IS420UCSCH1A is a compact standalone controller from the GE Mark VIe series for industrial automation, running QNX Neutrino on a quad-core 1.2 GHz AMD G-Series processor. MTBF approx. 414,248 hours at 30 C.

IS420UCSCH1B

Quad-Core Controller Module

The IS420UCSCH1B is a quad-core controller for the GE Mark VIe distributed control system, running QNX Neutrino and supporting TMR, simplex and dual redundancy configurations.

IS420UCSCH1C

Quad-Core Mark VIe Controller

The IS420UCSCH1C is a high-performance controller for the GE Mark VIe series, with a 1.2 GHz AMD G-Series quad-core processor, 4 GB DDR3 SDRAM, QNX Neutrino, six Ethernet ports and embedded PPNG/EFA/EtherCAT. Input 18-30 VDC.

IS420UCSCH2A-B

Quad-Core Controller Module

The IS420UCSCH2A-B is a quad-core controller module for GE combined-cycle power plant, wind turbine and steam/gas turbine applications. 7 RJ-45 Ethernet ports, 18-32 V DC, IEC-61508 and Achilles certified.

IS420UCSCS2A

Dual Core Safety Controller Module

The IS420UCSCS2A is a dual-core controller module for the GE Mark VIeS safety control system, meeting SIL 2 and SIL 3 capabilities for safety-instrumented systems. 1.6 GHz AMD G-Series, 2 GB DDR3 SDRAM, DIN-rail mounted.

IS420YAICS1B

Analog I/O Module

The IS420YAICS1B is an analog I/O module for the GE Mark VIeS control system, interfacing one or two I/O Ethernet networks to an analog I/O terminal board. 10 analog inputs, 16-bit ADC, 5.3 W.

IS430SSUAH1A

Universal Analog I/O Module

The IS430SSUAH1A is a universal analog I/O module for the GE Mark VIeS turbine control system, supporting 16 simplex analog channels with a 16-bit ADC, NAMUR digital input modes and flexible output options. DIN-rail mounted.

JGDR-G1C

Control BoardABB

Gate Driver Board

The ABB JGDR-G1C is a gate driver board used in ABB ACS850 and ACSM1 series inverter drives, managing the triggering of power semiconductor devices (IGBTs/thyristors) for motor control. 24 VDC.

LC694CHS398

BackplaneGE Fanuc

5-Slot Expansion Baseplate

The LC694CHS398 is a 5-slot expansion baseplate for the GE Fanuc RX3i / Series 90-70 PLC family.

LS200TRLYH1BHH

Relay Output Terminal Board

The LS200TRLYH1BHH is a relay output terminal board for the GE Mark VIe control system.

ME95MBP001

PLC CPU ModuleGE Fanuc

Central Processing Unit

The ME95MBP001 is a central processing unit (CPU) module from GE Fanuc.

PCI-5565

Reflective Memory Interface Card

The GE PCI-5565 reflective memory interface enables data sharing between up to 256 nodes at rates up to 174 Mbyte/s over a fiber-optic data path, with onboard SDRAM (64 or 128 Mbyte) and dynamic 4-64 byte packets.

PCIE-5565

Reflective Memory Node Card

The GE PCIE-5565PIORC is a low-profile PCI Express reflective memory node card, providing a high-speed deterministic interface for data sharing between up to 256 nodes at rates up to 170 Mbyte/s. Configurable 128/256 MB onboard SDRAM.

PMC-5565

Reflective Memory Node Card

The GE PMC-5565PIORC is a reflective memory node card engineered for ultra-high-speed fiber-optic networks in distributed processing applications, providing deterministic real-time data sharing across network nodes.

PR500UA

Programmable Logic ControllerGE Fanuc

Programmable Relay Unit

The PR500UA is a programmable relay unit for industrial automation, 24V DC supply, 12 digital inputs (dry contact/PNP) and 8 relay outputs (24V DC / 230V AC), 32-bit ARM Cortex-M4 at 72 MHz, expandable I/O.

PR500UF

Programmable Logic ControllerGE Fanuc

Programmable Relay Unit

The PR500UF is a programmable relay unit for industrial automation, 24V DC supply, 16 digital inputs (dry contact/PNP) and 12 relay outputs (24V DC / 230V AC), 32-bit ARM Cortex-M4 at 72 MHz, expandable I/O.

PR500UM

Programmable Logic ControllerGE Fanuc

Programmable Relay Unit

The PR500UM is a programmable relay unit for industrial automation and control. 24V DC supply, 16 digital inputs (dry contact or PNP), 8 relay outputs, with data logging and self-diagnostics.

PXI-5565

Fiber-Optic Reflective Memory Card

The PXI-5565 is a fiber-optic reflective memory card that expands system memory and shares memory resources across nodes via high-speed fiber-optic links.

S700VR-EST