Parts catalogue

Series 90-70 Bus Receiver Module

Series 90-70 bus receiver module permitting expansion of up to seven additional IC697 racks over 15 m of cable. Input 5VDC, 0.8A, single slot.

IC697BEM713

Series 90-70 Bus Transmitter Module

Series 90-70 bus transmitter module providing parallel programmer interface and bus expansion to up to 7 racks. 500 Kbytes/sec, 1.4A from 5V bus, 15 m max cable.

IC697BEM713GD

Series 90-70 Bus Transmitter Module

Series 90-70 bus transmitter expansion module (revision GD) for GE Fanuc IC697 PLC rack expansion.

IC697BEM731

Series 90-70 Genius Bus Controller Module

Series 90-70 Genius bus controller module. Single slot, 5VDC at 1.3A, supports up to 30 Genius I/O devices per channel.

Contact for wholesale

IC697BEM731F

Series 90-70 Genius Bus Controller Module

Series 90-70 Genius bus controller module (revision F) for GE Fanuc IC697 PLC systems.

IC697BEM731Z

Series 90-70 Genius Bus Controller Module

Series 90-70 Genius bus controller module (revision Z) for GE Fanuc IC697 PLC systems.

IC697BEM733

Remote I/O ModuleGE Fanuc

Series 90-70 Remote I/O Scanner Module

Series 90-70 remote I/O scanner module for GE Fanuc IC697 PLC systems.

IC697BEM733D

Remote I/O ModuleGE Fanuc

Series 90-70 Remote I/O Scanner Module

Series 90-70 remote I/O scanner module (revision D) interfacing IC697 I/O with an IC66 bus up to 2275 m from the controller. 38.4 Kbaud, 0.8A.

IC697BEM742

Series 90-70 FIP Fieldbus Controller Module

Series 90-70 FIP (WorldFIP) fieldbus bus controller module for GE Fanuc IC697 PLC systems.

IC697BEM763

Series 90-70 PCIM Bus Controller Module

Series 90-70 bus controller / interface module for GE Fanuc IC697 PLC systems.

IC697BME731

Series 90-70 Genius Bus Controller Module

Series 90-70 Genius bus controller module enabling communication between the PLC CPU and up to 30 Genius I/O devices. Single slot, 5VDC at 1.3A.

IC697CBL803

CableGE Fanuc

Series 90-70 Bus Expansion Cable

Bus expansion cable accessory for GE Fanuc Series 90-70 (IC697) PLC rack interconnection.

IC697CBL811

CableGE Fanuc

Series 90-70 Bus Expansion Cable

Bus expansion cable accessory for GE Fanuc Series 90-70 (IC697) PLC rack interconnection.

IC697CGR772

Series 90-70 Redundancy CPU Module

Series 90-70 redundancy CPU module with 80486DX4 96 MHz processor, 512 KB CMOS RAM, hot-standby support, single slot.

IC697CGR772

Redundancy CPU Module

GE Fanuc Series 90-70 hot-standby redundancy CPU module. 80486DX4 at 96 MHz, 32-bit floating point, 512KB battery-backed memory, dual Genius bus for active/standby redundant control.

IC697CGR935

Series 90-70 Redundancy CPU Module

Series 90-70 redundancy CPU module supporting hot standby. 80486DX4 96 MHz, 1 MB CMOS RAM, up to 12K discrete I/O.

IC697CHS750

Series 90-70 5-Slot Rear-Mount Rack

Series 90-70 5-slot rear-panel-mount rack for IC697 modules plus a power supply slot. 20A at 5VDC internal capacity, mechanical keying.

IC697CHS770

Series 90-70 Redundant Rack

Series 90-70 redundant rack with 12 backplane slots in two sections and two power supply slots, for high-availability IC697 systems.

IC697CHS782

Series 90-70 Rear-Mount VME Integrator Rack

Series 90-70 rear-mount VME integrator rack housing up to 17 single-width VME modules or 8 double-width IC697 modules.

IC697CHS790

Series 90-70 9-Slot Rack Chassis

Series 90-70 9-slot mounting chassis for IC697 modules with backplane power and communication, supports up to two additional racks sharing one power module.

IC697CHS790K

Series 90-70 9-Slot Rack Chassis

Series 90-70 9-slot rack chassis (revision K) for IC697 modules.

IC697CHS791

Series 90-70 Rack Chassis

Series 90-70 PLC rack chassis for IC697 modules.

IC697CLG320

Analog Output ModuleGE Fanuc

Series 90-70 Analog Output Module

Series 90-70 analog output module for GE Fanuc IC697 PLC systems.

IC697CLG440

Expansion ModuleGE Fanuc

Series 90-70 Analog Current Expander Module

Series 90-70 analog current expander module for GE Fanuc IC697 PLC systems.

IC697CMM711

Communication ProcessorGE Fanuc

Series 90-70 Communications Coprocessor Module

Series 90-70 communications coprocessor module supporting CCM, RTU, SNP and SNPx protocols. 12 MHz 80C186, two RS-232/422/485 ports.

IC697CMM731

Series 90-70 Broadband MAP Interface Module

Series 90-70 broadband MAP interface module for IEEE 802.4 (MAP 3.0) networks, providing direct PLC-to-network connectivity. Occupies two slots.

IC697CMM741

Series 90-70 Communications Module

Series 90-70 communications module for GE Fanuc IC697 PLC systems.

IC697CMM742

Series 90-70 Ethernet Interface Module

Series 90-70 Ethernet interface module with 3 network ports, 10/100 Mbps, supporting Ethernet/IP and Modbus TCP/IP. Operates at +5VDC/+12VDC.

IC697CMM742FD

Series 90-70 Ethernet Interface Module

Series 90-70 Ethernet interface module (revision FD) for GE Fanuc IC697 PLC systems.

IC697CMM742FF

Series 90-70 Ethernet Interface Module

Series 90-70 Ethernet interface module (revision FF) for GE Fanuc IC697 PLC systems.

IC697CMM742HK

Series 90-70 Ethernet Interface Module

Series 90-70 Ethernet interface module (revision HK) for GE Fanuc IC697 PLC systems.

IC697CMM742KL

Series 90-70 Type 2 Ethernet Interface Module

Series 90-70 Type 2 Ethernet interface module (revision KL) for GE Fanuc IC697 PLC systems.

IC697CMM742LL

Series 90-70 Ethernet Interface Module

Series 90-70 Ethernet interface module (revision LL) for GE Fanuc IC697 PLC systems.

IC697CMM742MM

Series 90-70 Ethernet Interface Module

Series 90-70 Ethernet interface module (revision MM) for GE Fanuc IC697 PLC systems.

IC697CPM915

Series 90-70 Floating-Point CPU Module

Series 90-70 floating-point CPU module for GE Fanuc IC697 PLC systems.

IC697CPM925

Series 90-70 Single-Slot Floating-Point CPU Module

Series 90-70 single-slot floating-point CPU module. 64 MHz 80486DX2, 1 MB battery-backed CMOS RAM, up to 12K discrete and 8K analog I/O.

IC697CPU731

Series 90-70 CPU Module

Series 90-70 expandable CPU module. 12 MHz 80C186 processor, 32 KB memory, single slot, 1.0A required.

IC697CPU771E

Series 90-70 CPU Module

Series 90-70 CPU module (revision E) for GE Fanuc IC697 PLC systems.

IC697CPU780

Series 90-70 Redundant CPU Module

Series 90-70 single-slot CPU module for redundant controller configurations with bumpless failover. 80386DX 16 MHz, 0.4 us Boolean execution.

IC697CPU781

Series 90-70 CPU Module

Series 90-70 main CPU module executing user logic and managing I/O. 16 MHz processor (later RISC variant), up to 12K I/O, RS-232/RS-485/Ethernet interfaces.

IC697CPU782