Parts catalogue

Power Distribution Board

The IS2020JPDBG01 is a JPDB power distribution board for GE Mark VIe distributed control systems, managing AC power regulation, monitoring and distribution. Consists of two line filters and an IS200JPDB circuit board.

IS2020JPDCG02

Power Distribution UnitGE Fanuc

Power Distribution Module

The IS2020JPDCG02 is a JPDC power distribution module for the GE Mark VIe control system, consolidating input and output power functions previously handled by separate modules.

IS2020JPDFG02

Power Distribution UnitGE Fanuc

Power Distribution Module

The IS2020JPDFG02 is a JPDF power distribution module for GE Mark VIe systems, providing regulated power to control and I/O modules with multiple input ranges.

IS2020RKPSG2A

VME Rack Power Supply Module

The IS2020RKPSG2A is a RKPS power supply module for the GE Mark VI Speedtronic gas turbine control system, 125V DC input, 400W total output (+5V, +/-12V, +/-15V, +/-28V DC), side-mounted on VME racks.

Contact for wholesale

IS2020RKPSG3A

VME Rack Power Supply Module

VME rack power supply module developed by General Electric, designed to fit the right-hand VME control and interface racks. Each version has specific input and output criteria.

IS210AEAAH1B

Conformal Coated Circuit Board

Conformal-coated PCB for the GE Mark VIe wind turbine control system. Functional acronym AEAA, functional revision B. Uses factory-drilled mounting holes rather than standard VME rack structure.

IS210AEAAH1BCA

Printed Circuit Board

Printed circuit board for the GE Mark VI control system. 24V DC supply, 0-10V DC output, 2A maximum current.

IS210AEAAH1BDA

Circuit Board Card

Printed circuit board for the GE Mark VI control system. 24V DC supply, 0-10V DC output, 2A maximum current.

IS210AEAAH1BGB

Printed Circuit Board

Printed circuit board for the GE Speedtronic Mark V turbine control system. 24V DC supply, 0-10V DC output, 2A maximum current.

IS210AEAAH1BHB

Controller Module

Controller module from the GE Mark VIe wind turbine series. Outputs +5 VDC up to 20A, +12 VDC up to 2A, -12 VDC up to 1A; input 85-264 VAC or 100-150 VDC. Conformal coating, functional revision 1B.

IS210AEAAH1BJD

Digital Input ModuleGE Fanuc

Digital Input/Output Module

Digital input/output module for the GE Mark VI control system. 24V DC supply with multiple digital I/O channels, 0-10V DC output, 2A maximum current.

IS210AEAAH1BJE

Printed Circuit Board

PLC module for the GE Speedtronic Mark V series. 24 VDC supply, 0-10 VDC output, 2A maximum current. Supports digital, analog, and special-purpose signals.

IS210AEAAH1BKE

Circuit Board

Conformal-coated circuit board for the GE Mark VIe wind turbine control system. Uses factory-drilled mounting holes (not VME rack mounting) with six insulated mounting holes.

IS210AEAAH2BKE

Printed Circuit Board

Conformal-coated I/O board for the GE Mark VIe wind turbine control system, supporting drive assembly operations. Functional acronym AEAA, functional revision B.

IS210AEAAH3BKE

I/O ModuleGE Fanuc

I/O Module

I/O module for the GE Mark VIe control system, used for monitoring and controlling industrial processes. Operating range typically -40C to 70C.

IS210AEBIH1BAA

Bridge Interface Card

AE bridge interface board for the GE Mark VI wind turbine control system. Supports digital and analog I/O; operating range -40C to +85C.

IS210AEBIH1BAB

Bridge Interface Card

AE bridge interface module for the GE Mark VIe turbine control system.

IS210AEBIH1BDA

AE Bridge Interface Card

AE bridge interface board for the GE Speedtronic Mark V series, used to control and monitor industrial processes. Supports Ethernet connectivity.

IS210AEBIH1BEA

Bridge Interface Controller Module

AE bridge interface PLC module for the GE Speedtronic Mark V series. 24 VDC supply, 0-10 VDC output, 2A maximum current.

IS210AEBIH1BED

Bridge Interface Card

AE bridge interface module for the GE Mark VI control system, acquiring and processing analog input signals (voltage or current). Voltage range 12-48 VDC, 32-bit RISC processor.

IS210AEBIH2B

Communication ModuleGE Fanuc

Alternative Energy Bridge Interface Module

Printed circuit board manufactured by GE Energy for the Mark VIe Wind series control system. Functional acronym AEBI.

IS210AEBIH2BE

Alternative Energy Bridge Interface

Alternative Energy Bridge Interface (AEBI) board for the GE Mark VIe Wind series. Conformal coated; dimensions 33.0 cm high x 17.8 cm wide. Performs analog-to-digital conversion for transmission over the VME bus.

IS210AEBIH3BBC

Alternative Energy Bridge Interface

Alternative Energy Bridge Interface (AEBI) board for the GE Mark VIe Wind series. 24V DC supply, operating range -40C to 85C, supports RS485 and Ethernet.

IS210AEBIH3BEC

Bridge Interface Card

AE bridge interface board from GE's IS200 series for industrial automation. Supports Modbus and Profibus communication.

IS210AEBIH3BED

I/O Board

I/O board for the GE Mark VIe series turbine control system.

IS210AEDBH3ACC

Analog Input ModuleGE Fanuc

Analog Input Module

Analog input module for the GE Mark VIe series. 16 isolated differential analog input channels, +/-10V range, 24V DC supply, conformal coated.

IS210AEDBH3AD

Communication ModuleGE Fanuc

HART Communication Module

GE HART communication / analog input module with 8 analog input channels, 16-bit resolution, 0.1% accuracy, DIN rail mounting. Power input 24VDC or 120VAC.

IS210AEDBH4AGD

Bridge Interface Card

Bridge interface card within the GE Mark VI system, used to manage gas and steam turbines.

IS210AEPSG1AFC

Power Supply Board

Power supply board for the GE Mark VI turbine control system, with transformers, inductor coils, varistor voltage protection and LED status indicators.

IS210AEPSG1B

Alternative Energy Power Supply Module

Alternative Energy Power Supply (AEPS) module for the GE Mark VIe wind turbine control system. Provides regulated power and signal conditioning; outputs +/-10 VDC and 4-20 mA, operating range -20C to +65C.

IS210AEPSG1BCB

Thermocouple Terminal Board

Thermocouple terminal board for the GE Mark VI control system.

IS210AEPSG2BB

Programmable Logic Controller Module

GE programmable logic controller module. 24VDC input, 5VDC output, 15W power consumption, DIN rail mounting, operating range -40C to +70C.

IS210BAPAH1A

Digital Input ModuleGE Fanuc

Input Module

Recognized manufacturer reference available for industrial supply enquiry.

IS210BPPBH2BGB

PLC CPU ModuleGE Fanuc

Processor Board

Auxiliary/daughterboard for the GE Mark VI IS200 system that connects to the main WETA board. Suitable for gas and steam turbines; supports use in TMR (Triple Modular Redundant) systems. Functional acronym BPPB.

IS210BPPBH2BJD

I/O ModuleGE Fanuc

I/O Pack Board

BPPB I/O pack board for the GE Mark VI control system.

IS210BPPBH2BMD

PCB Assembly

Printed circuit board assembly within the GE Mark VI system, used to manage steam or gas turbines. 24V DC input, Ethernet/RS485, operating range -40C to 70C.

IS210BPPBH2CAA

Turbine Control Printed Circuit Board

Printed circuit board for the GE Mark VI turbine control system, for use with steam and gas turbine prime movers. Functional acronym BPPB.

IS210BPPCH1AC

PLC CPU ModuleGE Fanuc

I/O Pack Processor Board

I/O pack processor board for the GE Mark VIe Speedtronic system (UCPA), an upgrade over older BPPB packs. Nominal 9-16 VDC (12 VDC). Compatible with YAICS1B, YDIAS1B, YDOAS1B, PVIBH1B, YVIBS1B and more.

IS210BPPCH1ACA

I/O Pack Processor Card

BPPC I/O pack processor card for the GE Mark VIe control platform (not compatible with Mark VIeS). Enhances older BPPB I/O packs; used with TMR or Dual terminal boards.

IS210BPPCH1AD

I/O Pack Processor Board

BPPC I/O pack processor board for the GE Mark VIe turbine control system (not compatible with Mark VIeS). Double-sided SMT board, factory drilled for standoff mounting.

IS210BPPCH1AEC

PLC CPU ModuleGE Fanuc

I/O Pack Processor Board

BPPC I/O pack processor board for the GE Mark VIe control system. Double-sided SMT board; compatible with systems running ControlST V04.04 or later.

IS210BPPH2BLD

Printed Circuit Board

Printed circuit board for the GE Mark VI control system, managing gas and steam turbine operations. Supports digital and analog I/O; operating range -40C to +85C.

IS210HSLAH1ADE

Control System Circuit Board

GE control system circuit board for high-performance industrial applications.

IS210JPDHG1AC

Gas Turbine Control Board

Gas turbine control board for the GE Mark VI system.

IS210MACCH1AEF

Multiple Application Converter Control Board

MACC control board for managing turbine functions in GE wind energy applications. Typically 24V DC, operating range -40C to 70C, RS485 communication.

IS210MACCH1AKH

Multiple Application Converter Control Card

MACC circuit board card for the GE Speedtronic Mark VI system, supporting safe operation of steam and gas industrial turbines. Compact card without faceplate.

IS210MACCH2AEG

Multiple Application Converter Controller

MACC controller board from GE's IS200 series for industrial automation, supporting Modbus and Profibus communication.

IS210MACCH2AFG

Multi-Function I/O Controller

MACC multi-function I/O controller for GE power generation environments. Typically 24V DC, operating range -40C to 70C, RS485 communication.