Parts catalogue

Industrial Ethernet IONet Switch

The IS420ESWAH1A is an industrial Ethernet IONet switch for the GE Mark VIe and Mark VIeS turbine control systems, with fiber port connectivity.

IS420ESWAH2A

Industrial Ethernet Switch

The IS420ESWAH2A is an unmanaged industrial Ethernet switch for the GE Mark VIe and Mark VIeS turbine control systems. 8 x 10/100BASE-TX copper ports, 2 x 100BASE-FX fiber ports, DIN-rail mounted.

IS420ESWAH3A

IONet Ethernet Switch

The IS420ESWAH3A is an IONet Ethernet switch for the GE Mark VIe gas turbine control system, using Achilles-certified controllers and meeting NERC Version 5 reliability standards.

IS420ESWBH1A

Ethernet IONet Switch with Fiber

The IS420ESWBH1A is an ESWB Ethernet IONet switch with fiber port for the GE Mark VIe turbine control system.

Contact for wholesale

IS420ESWBH1AE

Ethernet IONet Switch

The IS420ESWBH1AE is the second hardware version of the GE Mark VIe ESWB IONet switch, with sixteen 10/100BASE-TX RJ45 copper ports and one multi-mode 100BASE-FX fiber port (LC connector). Output 24/28 VDC.

IS420ESWBH2A

Ethernet IONet Switch

The IS420ESWBH2A is an unmanaged industrial Ethernet IONet switch for the GE Mark VIe and Mark VIeS turbine control systems.

IS420ESWBH3A

Ethernet IONet Switch

The IS420ESWBH3A is an 8-port Ethernet IONet switch (10/100BASE-TX) for the GE Mark VIe distributed gas turbine control system. 138 x 86 x 56 mm, 256 MB DDR SDRAM, QNX Neutrino.

IS420ESWBH3AE

16-Port Ethernet IONet Switch

The IS420ESWBH3AE is a 16-port 10/100BASE Ethernet IONet switch for the GE Mark VIe distributed gas turbine control system.

IS420ESWBH5A

Ethernet IONet Switch

The IS420ESWBH5A is an Ethernet IONet switch for the GE Mark VIeS distributed control system, connecting multiple devices over a LAN.

IS420PPNGH1A

PROFINET Gateway Module

The IS420PPNGH1A is a PROFINET gateway module for the GE Mark VIe / Mark VIeS Speedtronic turbine control system, connecting Mark VIe controllers to a PROFINET LAN. 1066 MHz EP80579 Intel processor.

IS420PUAAH1A

I/O ModuleGE Fanuc

Universal Input/Output Pack

The IS420PUAAH1A is a universal input/output I/O pack for the GE Mark VIe / Mark VIeS control system, used in distributed and balance-of-plant control. Similar to the YUAA board in Mark VIeS.

IS420UCECH1B

Quad Core Mark VIe Controller

The IS420UCECH1B is a quad-core controller for the GE Mark VIe distributed control system, running QNX Neutrino with 4 GB DDR3 SDRAM and 5 Ethernet ports, supporting simplex, dual and TMR redundancy.

IS420UCSBH1A

UCSB Mark VIe Safety Controller

The IS420UCSBH1A is the first UCSB controller for the GE Mark VIe Control Safety System, also used in EX2100e and LS2100e environments. Intel EP80579 600 MHz, compact fanless design, ATEX Zone 2, 24/28 VDC.

IS420UCSBH3A

UCSB Controller Module

The IS420UCSBH3A is a UCSB controller module for the GE Mark VIe series, a stand-alone computer running application control logic with access to all I/O networks without hosting I/O on a backplane.

IS420UCSBH4A

UCSB Controller Module

The IS420UCSBH4A is a high-performance UCSB controller module for the GE Mark VIe control system, used in gas and steam turbine applications. Intel EP80579 1066 MHz, 256 MB DDR2 SDRAM, QNX Neutrino, supports simplex and TMR.

IS420UCSBS1A

UCSB Safety Controller Module

The IS420UCSBS1A is a UCSB safety controller module for the GE Mark VIeS control system.

IS420UCSCH1A

Speedtronic Turbine Controller

The IS420UCSCH1A is a compact standalone controller from the GE Mark VIe series for industrial automation, running QNX Neutrino on a quad-core 1.2 GHz AMD G-Series processor. MTBF approx. 414,248 hours at 30 C.

IS420UCSCH1B

Quad-Core Controller Module

The IS420UCSCH1B is a quad-core controller for the GE Mark VIe distributed control system, running QNX Neutrino and supporting TMR, simplex and dual redundancy configurations.

IS420UCSCH1C

Quad-Core Mark VIe Controller

The IS420UCSCH1C is a high-performance controller for the GE Mark VIe series, with a 1.2 GHz AMD G-Series quad-core processor, 4 GB DDR3 SDRAM, QNX Neutrino, six Ethernet ports and embedded PPNG/EFA/EtherCAT. Input 18-30 VDC.

IS420UCSCH2A-B

Quad-Core Controller Module

The IS420UCSCH2A-B is a quad-core controller module for GE combined-cycle power plant, wind turbine and steam/gas turbine applications. 7 RJ-45 Ethernet ports, 18-32 V DC, IEC-61508 and Achilles certified.

IS420UCSCS2A

Dual Core Safety Controller Module

The IS420UCSCS2A is a dual-core controller module for the GE Mark VIeS safety control system, meeting SIL 2 and SIL 3 capabilities for safety-instrumented systems. 1.6 GHz AMD G-Series, 2 GB DDR3 SDRAM, DIN-rail mounted.

IS420YAICS1B

I/O ModuleGE Fanuc

Analog I/O Module

The IS420YAICS1B is an analog I/O module for the GE Mark VIeS control system, interfacing one or two I/O Ethernet networks to an analog I/O terminal board. 10 analog inputs, 16-bit ADC, 5.3 W.

IS430SSUAH1A

I/O ModuleGE Fanuc

Universal Analog I/O Module

The IS430SSUAH1A is a universal analog I/O module for the GE Mark VIeS turbine control system, supporting 16 simplex analog channels with a 16-bit ADC, NAMUR digital input modes and flexible output options. DIN-rail mounted.

JGDR-G1C

Control BoardABB

Gate Driver Board

The ABB JGDR-G1C is a gate driver board used in ABB ACS850 and ACSM1 series inverter drives, managing the triggering of power semiconductor devices (IGBTs/thyristors) for motor control. 24 VDC.

LC200PWR102

Power SupplyGE Fanuc

Power Supply Module

The LC200PWR102 is a power supply module from GE.

LC694CHS398

BackplaneGE Fanuc

5-Slot Expansion Baseplate

The LC694CHS398 is a 5-slot expansion baseplate for the GE Fanuc RX3i / Series 90-70 PLC family.

LS200TRLYH1BHH

Terminal BoardGE Fanuc

Relay Output Terminal Board

The LS200TRLYH1BHH is a relay output terminal board for the GE Mark VIe control system.

MDP10

RelayGE Fanuc

Digital Overcurrent Relay

The GE MDP-10 is a digital overcurrent relay for protection of feeders, transmission lines and AC machines, with phase and ground time/instantaneous overcurrent functions, zone interlocking and RS485 communication.

ME95MBP001

PLC CPU ModuleGE Fanuc

Central Processing Unit

The ME95MBP001 is a central processing unit (CPU) module from GE Fanuc.

MIC10

IndicatorKrautkramer

Portable Hardness Tester

The Krautkramer MIC 10 is a portable UCI hardness tester for metals.

MIFIIPI11E10HI00

RelayGE Fanuc

Digital Feeder Protection Relay

The MIFIIPI11E10HI00 is a digital feeder protection relay from the GE Multilin M II family, providing time-delayed and instantaneous overcurrent protection and thermal image protection with Modbus RTU over RS232/RS485. 16x2 LCD, six status LEDs.

MIFIIPI11E1RHI00

RelayGE Fanuc

Digital Feeder Protection Relay

The MIFIIPI11E1RHI00 is a digital feeder protection relay from the GE Multilin M II family, with time-delayed and two-level instantaneous overcurrent protection, thermal overload protection, Modbus RTU over RS232/RS485, and a 16x2 LCD.

MIFPI55E000H00C

RelayGE Fanuc

Digital Feeder Protection Relay

The MIFPI55E000H00C is a GE Multilin digital feeder relay for protection and control of electrical distribution feeders, with overcurrent, earth fault and directional earth fault protection.

MIVII1000E00HI00

RelayGE Fanuc

Voltage and Frequency Relay

The MIVII1000E00HI00 is a GE Multilin voltage and frequency relay providing directional power protection and metering of voltage, current and power, with RS232/RS485 communication.

MIVII1000E00HI12

RelayGE Fanuc

Voltage and Frequency Relay

The MIVII1000E00HI12 is a GE Multilin voltage and frequency relay providing directional power protection and metering.

MMII-PD-1-2-120

Motor Protection RelayGE Multilin

MMII Motor Manager Protection System

GE Multilin Motor Manager II (MM2) intelligent MCC controller / motor protection relay for 120 V AC/DC control circuits with panel display, overload, phase-unbalance and stall protection.

MMII-PD-1-2-240

Motor Protection RelayGE Multilin

MMII Motor Manager Protection System

GE Multilin Motor Manager II (MM2) intelligent MCC controller / motor protection relay for 240 V AC control circuits with panel display, overload, phase-unbalance and stall protection.

MTS5-351-10

Process AnalyzerGE Fanuc

Moisture Analyzer

The MTS5-351-10 is a moisture analyzer from GE.

MV3013-4001A

Power ConverterGE Fanuc

MV3000 Low Voltage Power Converter

The MV3013-4001A is part of the GE Power Conversion MV3000 low voltage power converter series, offering modular power blocks for ratings from 0.5 MW to 6 MW, with active front end and common DC bus architectures.

MVC3013-4001

Power MeterGE Fanuc

Mains Voltage Monitoring Module

The MVC3013-4001 is a mains voltage monitoring module providing continuous line-voltage tracking with configurable over/undervoltage and power-outage alarms.

O2X1IS

Process AnalyzerGE Fanuc

Intrinsically Safe Oxygen Transmitter

The GE O2X1IS is a compact intrinsically safe oxygen transmitter for continuous monitoring of oxygen levels in industrial and hazardous areas. Electrochemical fuel cell sensor, linearized 4-20 mA loop-powered output, FM/CSA certified.

PCI-5565

Control BoardGE Fanuc

Reflective Memory Interface Card

The GE PCI-5565 reflective memory interface enables data sharing between up to 256 nodes at rates up to 174 Mbyte/s over a fiber-optic data path, with onboard SDRAM (64 or 128 Mbyte) and dynamic 4-64 byte packets.

PCIE-5565

Control BoardGE Fanuc

Reflective Memory Node Card

The GE PCIE-5565PIORC is a low-profile PCI Express reflective memory node card, providing a high-speed deterministic interface for data sharing between up to 256 nodes at rates up to 170 Mbyte/s. Configurable 128/256 MB onboard SDRAM.

PCMAS75S24

Power SupplyGE Fanuc

Primary Switched Power Supply Module

The PCMAS75S24 is a primary switched power supply module for industrial applications, 75 W output, 24 V DC / 3 A, 90-264 VAC input, efficiency >=89%, chassis mounted. 166 x 85 x 35 mm.

PL96501A0A10000

Power MeterGE Multilin

EPM 9650 Power Quality Meter

GE Multilin EPM 9650 power quality meter.

PL96501A0A10000

Power MeterGE Multilin

Multilin EPM 9650 Power Quality Meter

GE Multilin EPM 9650 advanced power quality meter with waveform recording and high-accuracy revenue-grade measurement of voltage, current and harmonics. Part of the GE 9000 series.

PMC-5565

Control BoardGE Fanuc

Reflective Memory Node Card

The GE PMC-5565PIORC is a reflective memory node card engineered for ultra-high-speed fiber-optic networks in distributed processing applications, providing deterministic real-time data sharing across network nodes.

PQMII-A

Power MeterGE Fanuc

Power Quality Meter

The GE PQMII-A is a power quality meter for industrial and commercial applications, monitoring voltage, current, power, energy and harmonics. Voltage 0-600V, current 0-5000A, accuracy +/-0.2%, Modbus/RS232/RS485/Ethernet.