Parts catalogue

Emergency Trip Termination Board

GE IS200TREGH2BEC emergency trip termination board for the Mark VI Speedtronic system, with multiple relays/contactors and MOV surge protection. Rack-mounted.

IS200TRLYS1BGG

Discrete I/O Board

GE IS200TRLYS1BGG discrete I/O board from the Speedtronic series for industrial gas and steam turbines, with 16 channels of 24V DC digital output, 0.5A per channel.

IS200TRPGH1B

Primary Trip Terminal Board

GE IS200TRPGH1B primary trip terminal board from the Mark VI series, with three voting circuits operating nine magnetic relays connected to three trip solenoids (ETDs).

IS200TRPGH1BCC

Control Board

General Electric

Primary Trip Terminal Board

GE IS200TRPGH1BCC primary trip terminal board for the Mark VI turbine control system.

Contact for wholesale

IS200TRPGH1BDE

Primary Trip Terminal Board

GE IS200TRPGH1BDE primary trip terminal board for the Mark VI control system.

IS200TRPGH2B

Primary Trip Terminal Board

GE IS200TRPGH2B primary trip terminal board for the Mark VI turbine control system.

IS200TRROH1B

Termination Board

GE IS200TRROH1B termination board for the Mark VI turbine control system.

IS200TRTDH1CCC

RTD Terminal Board

GE IS200TRTDH1CCC RTD (resistance temperature device) terminal board from the Mark VI control system for temperature measurement and monitoring.

IS200TRTDH1DCB

RTD Terminal Board

GE IS200TRTDH1DCB RTD terminal board from the Mark VIe control system, supporting 16 three-wire RTD inputs via two barrier-type terminal blocks.

IS200TSVCH1A

Servo I/O Terminal Board

GE IS200TSVCH1A servo I/O terminal board interfacing electro-hydraulic servo valves for gas and steam turbine control. 24 VDC, 10 W.

IS200TSVCH1ACB

Servo I/O Terminal Board

GE IS200TSVCH1ACB servo I/O terminal board (PCB) for gas and steam turbine control.

IS200VCRCH1B

Turbine Control I/O Board

GE Mark VI VCRC discrete I/O processor board (VME architecture) for heavy-duty gas and steam turbine control. Acquires up to 48 discrete inputs and controls up to 24 relay outputs.

IS200VVIBH1C

Vibration Monitor Board

GE Mark VI VME vibration monitor board (VVIB) that processes vibration probe signals from TVIB/DVIB terminal boards. 16-bit resolution, up to 4600 samples/sec; compatible with Bently Nevada Proximitor/Seismic/Velomitor probes.

IS215VCMIH2BE

Mark VIe VME Bus Master Controller Board (VCMI)

GE Mark VIe Series VME Bus Master Controller (VCMI) board for Distributed Turbine Control Systems. Acts as the communication interface between the controller and the I/O boards over the IONet control network, serving as the VME bus master within the control and I/O racks and managing board IDs. 6U VME board, 24 V DC excitation, manual reference GEH-6421M.

IS215VCMIH2C

Mark VI VME Bus Master Controller Board (VCMI)

GE Mark VI Series VME Bus Master Controller (VCMI) board for GE Speedtronic Control Systems. 6U board with 32-bit processor, 12 channels, dual-port memory, 0-20 mA analog output, +5 V DC power, 10 ms frame rate.

IS215VCMIH2CA

VME Bus Master Controller Board (VCMI)

GE Mark VI/VIe VME Bus Master Controller (VCMI) board, revision H2CA.

IS215VCMIH2CC

VME Bus Master Controller Board (VCMI)

GE Mark VI/VIe VME Bus Master Controller (VCMI) board, revision H2CC.

IS215VPROH1BE

Turbine Protection Board (VPRO)

GE Mark VI Series VPRO emergency overspeed turbine protection board.

IS215VPROH2B

Turbine Protection Board (VPRO)

GE Mark VI Series VPRO turbine protection board for GE Speedtronic gas turbine control systems. Functions as an independent emergency overspeed protection system with the TPRO and TREG terminal boards, controlling trip solenoids via TREG. 3 inputs, 6 outputs, 125 V DC supply, surface-mount, manual GEH-6421H.

IS215VPROH2BC

Turbine Protection Board (VPRO)

GE Mark VI Series VPRO turbine protection board, revision H2BC.

IS215WEMAH1BA

Wind Energy Main Cabinet Board (WEMA)

GE Mark VIe wind energy main cabinet board for GE Distributed Control Systems used in renewable energy (wind/solar) systems, managing input and output of signals and data. 24 V outputs, surface-mount, 0-20 mA analog output, manual GEI-100746.

IS215WEMAH1BB

Wind Energy Main Cabinet Board (WEMA)

GE Mark VIe wind energy main cabinet board, revision H1BB.

IS215WEPAH1BD

Control ModuleGeneral Electric

Wind Energy Pitch Axis Module (WEPA)

GE Mark VIe wind energy pitch axis module for wind turbine pitch control. Supports simplex and triple-redundant configurations. Ambient range -40 to +70 C, COM1/COM2 plus micro-miniature 9-pin D connector, 10BaseT/AUI Ethernet, conformal coated.

IS215WEPAH2BA

Control ModuleGeneral Electric

Wind Energy Pitch Axis Module (WEPA)

GE Mark VI wind energy pitch axis control board module. Supports a range of I/O modules and communication options for turbine pitch control.

IS215WEPAH2BB

Wind Energy Pitch Axis Module (WEPA)

GE Mark VI WEPA printed circuit board for wind energy applications. Supports simplex and triple-redundant configurations. IONet/UDH communication, up to 20 female plug connectors (2-20 pins), 4 metal oxide varistors, 125 VDC supply, occupies a single VME rack slot.

IS215WEPAH2BD

Wind Energy Pitch Axis Module (WEPA)

GE Mark VIe WEPA printed circuit board. 3 COM ports (COM1, COM2, micro-miniature 9-pin D connector), 10BaseT/AUI Ethernet, 4 metal oxide varistors, 125 VDC supply, manual GEP-9145.

IS220PAICH1A

Analog I/O Pack (PAIC)

GE Mark VIe PAIC analog I/O pack for GE Speedtronic control systems. Connects one or two I/O Ethernet networks to an analog input terminal board. Power 27.4-28.6 VDC, ambient -30 to 65 C, UL/ATEX certified.

IS220PAICH1AD

Analog I/O Pack (PAIC)

GE Mark VIe PAIC analog I/O pack, revision H1AD.

IS220PAICH1B

Analog Input/Output Module (PAIC)

GE Mark VI PAIC analog I/O pack for the Speedtronic Turbine Control System, used in GE gas, steam and wind turbine drive assemblies. Ambient -40 to 158 F, analog transmitter power 22.8 VDC, ATEX Zone 2 / UL certified.

IS220PAICH1BG

Analog Input/Output Module (PAIC)

GE Mark VIe PAIC analog I/O pack. Up to 10 analog inputs, first 8 channels configurable as +/-5 V, +/-10 V or 0-20 mA, dual Ethernet interface, dimensions 13.3 x 7.08 x 3.93 cm.

IS220PAICH2A

Analog I/O Module (PAIC)

GE Mark VIe Speedtronic PAIC analog I/O pack. Electrical interface connecting one or two I/O Ethernet networks to an analog input terminal board via a single DC-37 pin connector. Includes a BPPx processor board and an analog I/O acquisition board; ten analog inputs.

IS220PAICH2B

Terminal BoardGeneral Electric

Thermocouple Analog I/O Terminal Board (PAIC)

GE Mark VI thermocouple analog I/O terminal board for GE Speedtronic gas turbine control systems. Interfaces analog inputs with Ethernet networks via the PAIC I/O pack. 12 analog input channels, +5 VDC at 6 A, QNX OS, manual GEH-6721 Vol II.

IS220PAOCH1A

Analog Output Module (PAOC)

GE Mark VIe / VIeS PAOC analog output module providing 8 independent current loop outputs (0-20 mA, up to 900 ohm loads), +/-0.5% accuracy from -30 to +65 C, dual RJ-45 Ethernet for IONet. Compatible terminal boards TBAOH1C, STAOH1A, STAOH2A.

IS220PAOCH1B

Analog Output Module (PAOC)

GE Mark VIe / VIeS PAOC analog output module providing precise current-based control signals to field devices such as actuators and valves. 8 analog outputs, galvanic isolation per channel, conformal-coated PCB. Compatible terminal board IS230SNAOH2A.

IS220PAOCH1BE

Analog Output Module (PAOC)

GE Mark VIe PAOC analog output unit, revision H1BE.

IS220PAOCHA1A

Analog Output Module (PAOC)

GE Mark VIe PAOC analog output module, revision HA1A.

IS220PAZCH1B

Turbine Control I/O Module (PAZC)

GE Mark VIe PAZC I/O module for turbine control systems.

IS220PCLAH1A

Core Analog I/O Module (PCLA)

GE Mark VIe PCLA core analog I/O module for distributed control systems, used in aero-derivative gas turbines to supply most analog signal I/O for engine operation. 4 channels, 16-bit A/D, 28 V DC input, 19.8 W max, manual GEH-6721L.

IS220PCLAH1B

Core Analog I/O Module (PCLA)

GE Mark VIe PCLA core analog I/O module supporting analog and digital signals. 24 analog inputs, 8 analog outputs, -20 mA to +20 mA input range, 16-bit acquisition, 2500 V DC isolation.

IS220PD0AH1A

I/O Pack Module

GE Mark VIe I/O pack module.

IS220PDIAH1A

Discrete Contact Input Terminal Board (PDIA)

GE Speedtronic Mark VIe PDIA I/O pack / discrete contact input board for gas turbine control systems. Metal housing, 24V DC input/output.

IS220PDIAH1AD

Discrete Contact Input Module (PDIA)

GE Mark VIe PDIA discrete contact input module, revision H1AD.

IS220PDIAH1B

Digital Input ModuleGeneral Electric

Discrete Contact Input Module (PDIA)

GE Mark VIe PDIA discrete contact input module. Contact input 0-32 VDC, wetting voltage 18.5-32 VDC, 24 contact inputs, 1000 MOhm insulation, 2500 VAC dielectric, IP20.

IS220PDIAH1BB

Digital Input ModuleGeneral Electric

Discrete Contact Input Module (PDIA)

GE Mark VIe PDIA discrete contact input module, revision H1BB.

IS220PDIAH1BC

Digital Input ModuleGeneral Electric

Discrete Contact Input Module (PDIA)

GE Mark VIe PDIA discrete contact input module, revision H1BC.

IS220PDIOH1A

Discrete Input/Output Module (PDIO)

GE Mark VIe PDIO discrete I/O module for distributed control systems. Provides the electrical connection between one or two I/O Ethernet networks and a discrete I/O terminal board. Includes a discrete-I/O acquisition board and the common Mark VIe processor board. Manual GEH-6721L.

IS220PDIOH1B

Discrete Input/Output Module (PDIO)

GE Mark VIe PDIO discrete I/O module for gas turbine control, revision H1B.

IS220PDIOS1A

Discrete Input/Output Module (PDIO)

GE Mark VIeS PDIO discrete I/O module, revision S1A.