Parts catalogue

Safety-Related Controller Module

The HIMA F6202 is a safety-related controller module in the HIMatrix F2 series. 24 V DC input, operating -20 to 60 C, Ethernet/RS485/RS232 communication, 512 KB memory; supports ladder logic and function block programming.

F6205

HIMatrix Controller Module

HIMatrix controller module from HIMA.

F6214

Analog Input ModuleHIMA

4-Channel Analog Input Module

The HIMA F6214 is a 4-channel analog input module for industrial applications. Accepts 4-20 mA, 0-10 V and RTD inputs; SIL 3 safety rating, IP67 protection.

F6215

Control BoardHIMA

I/O Module

I/O module from the HIMA HIMatrix safety system range.

Contact for wholesale

F6217

Analog Input ModuleHIMA

8-Channel Analog Input Module

The HIMA F6217 is an 8-channel analog input module for safety-related applications. Supports 0/4-20 mA current and 0-5/10 V voltage inputs with safety isolation, 12-bit resolution, tested to AK6/SIL3.

F6705

Analog Output ModuleHIMA

2-Fold Analog Output Module

The HIMA F6705 is a 2-fold analog output module. Outputs 0/4-20 mA, 12-bit resolution (4095 steps), burden RB up to 550 Ohm, line length up to 1000 m, electric strength 250 V against analog GND, source voltage 10-30 V.

F7105A

Processor ModuleHIMA

Process Module

The HIMA F7105A is part of the HIMatrix F60 system, offering modular configuration for process controllers, protective systems, burner systems and machine controllers. 24 V DC input, operating -20 to 60 C, Ethernet/RS485/RS232, 512 KB memory.

F7150

Digital Output ModuleHIMA

Digital Output Module

The HIMA F7150 is a 4-channel digital output module for safety systems. Input/output 20.4-26.4 VDC, 4 A per channel, response time < 10 ms, SIL 3 certified.

F7531

Control BoardHIMA

2-Fold Relay Amplifier Module

The HIMA F7531 is a 2-fold relay amplifier PC board module for HIMA safety-related programmable electronic systems (H41/H51 series). Contact rating 5 A at 230 VAC per channel, input power 48/60 VDC or 60 VAC, 19-inch rack form factor.

F7541

Digital Input ModuleHIMA

Digital Input / Coupling Module

The HIMA F7541 is a digital input / coupling module for safety-related automation systems. Operating voltage 5 VDC or 24 VDC, 8 or 16 digital input channels, RS-485 communication interface.

F7546

Bus CouplerHIMA

I/O Bus Coupling Module

The HIMA F7546 I/O bus coupling module links safety I/O devices to the HIMax safety controller. Redundant two-channel architecture for high availability.

F7553

Bus CouplerHIMA

Coupling Module

The HIMA F7553 coupling module enables data exchange and signal transmission between devices in HIMA automation systems. Power supply 5 VDC or 24 VDC, current consumption 600 mA (5 VDC) or 750 mA (24 VDC).

F8203

Control ModuleHIMA

Automation Module

The HIMA F8203 is an automation module for HIMA safety control systems.

F8601

Control Module Card

The HIMA F8601 is a control module card for HIMA safety systems.

F8620

Central Processing Unit

The HIMA F8620 is a central processing unit module for HIMA safety control systems.

F8620/11

Central Processing Unit

The HIMA F8620/11 is a central processing unit module. Input voltage 10-30 VDC, operating temperature -40 to 85 C, rugged metal housing.

F8620/4

CPU Module

The HIMA F8620/4 is a CPU module for HIMA safety control systems.

F8621A

Communication / CPU Module

The HIMA F8621A serves as a coprocessor or CPU module for safety instrumented systems. Microprocessor HD 64180 at 10 MHz, 384 KB static memory, dual-port RAM, 2x RS-485 half-duplex interfaces with galvanic isolation.

F8627

Ethernet Communication Module

The HIMA F8627 is a communication module for H41q and H51q safety systems. Supports safeethernet, OPC DA, MODBUS-TCP slave and ELOP II programming via Ethernet. 19-inch rack mountable, 100 Base-T Ethernet with RJ45 connector.

F8627X

Ethernet Communication Module

The HIMA F8627X is an Ethernet communication module enabling communication between F8650X/F8651X/F8652X/F8653X CPUs and other devices. Supports ELOP II TCP and MODBUS TCP, SIL 3 and PL e (Cat. 4).

F8628

Communication Module

The HIMA F8628 is a communication module for HIMA safety control systems.

F8628X

Communication Module

The HIMA F8628X is a communication module for HIMA safety control systems.

F8640

Central Processing Unit

The HIMA F8640 is a modular CPU module with a 32-bit RISC processor for industrial automation and safety systems.

F8641

Communication Module

The HIMA F8641 is a communication module for HIMA safety control systems.

F8650

Processor ModuleHIMA

Central Module

The HIMA F8650 is a central (CPU) module for HIMA H41q/H51q safety systems.

F8650A

Processor ModuleHIMA

Central Processing Module

The HIMA F8650A is a central module with two clock-synchronized Intel 386EX 32-bit microprocessors at 25 MHz, 1 MB Flash-EPROM and 1 MB SRAM per processor, four-digit matrix diagnostic display, and a safety-related watchdog (24 V, up to 500 mA, short-circuit proof).

F8650E

Safety System Central (CPU) Module

The HIMA F8650E is a safety system central module with an Intel 386EX 32-bit processor at 25 MHz, 1 MB Flash-EPROM, two RS-485 serial interfaces with electrical isolation, and a four-digit alphanumeric diagnostic display.

F8650X

Central Processing Unit

The HIMA F8650X is a central module with two clock-synchronized Intel 386EX 32-bit microprocessors at 25 MHz, 1 MB Flash-EPROM and 1 MB SRAM per processor, two RS-485 serial interfaces with electrical isolation, and a four-digit matrix diagnostic display.

F8651E

CPU Module

The HIMA F8651E is a central (CPU) module for HIMA safety systems.

F9404

Bus CouplerHIMA

Coupling Module

The HIMA F9404 is a coupling module for industrial automation systems, enabling secure data exchange between devices for safety-critical applications. 5 VDC or 24 VDC, 600 mA (5 VDC) / 750 mA (24 VDC), rack-mounted 4 TE, made in Germany.

H41Q-B4237-2

Redundant Modular Safety Controller

The HIMA H41Q-B4237-2 is a redundant modular safety controller with redundant central modules, 24/5 V power supply per central module, CPU with up to 16 MB RAM, and Ethernet interface. Expandable with up to 13 I/O modules, two communication modules and four fan modules.

H51Q-HRS-B5233-2

System Rack Assembly

The HIMA H51Q-HRS B5233-2 is a system rack assembly that houses the modules and components of the HIMA H51Q safety system.

H51Q-HS-B5233-1

Central Rack System

The HIMA HIQuad X H51Q-HS B5233-1 is a central rack system for safety applications, housing the safety controller, I/O modules and system rack within the H51Q-HS product line.

H7505

Interface ModuleHIMA

Interface Converter Module

The HIMA H7505 is a compact DIN rail-mountable interface converter module for safety-critical automation systems. Supports PROFIBUS DP, PROFISAFE, HART and 4-20 mA analog inputs; Ethernet/IP, Modbus TCP, FOUNDATION Fieldbus and SIL-rated outputs.

HBK2-H7505

24 VDC Interface Module

The HIMA HBK2-H7505 is a 24 VDC interface module for signal interfacing and distribution in HIMA safety automation systems. Rack-mountable, rugged industrial construction.

K1412B

Control ModuleHIMA

Automation Module

The HIMA K1412B is an automation module. Input/output 24 VDC, Ethernet/Modbus/PROFIBUS communication, 16 inputs and 8 outputs.

K9203

Accessories Rack Fan

The HIMA K9203 is an accessories rack fan unit for forced ventilation of 19-inch rack installations. Three axial fans, 24 VDC, max 750 mA, 300 m3/h airflow, 2800 RPM, ~55 dB(A), 62,500 h lifetime at 40 C, 1 RU depth 215 mm.

K9203A

Accessories Rack Fan

The HIMA K9203A is an accessories rack fan unit with three axial fans, redundant power supply, and fan/voltage monitoring. 24 VDC, max 750 mA, 300 m3/h airflow, 2800 RPM, ~55 dB(A), 62,500 h lifetime at 40 C, 1 RU depth 215 mm.

M2215

PLC ModuleHIMA

PLC Module

The HIMA M2215 is a PLC module for industrial control. 16 digital inputs, 16 digital outputs, 4 analog inputs, 2 analog outputs; RS-232, RS-485 and Ethernet communication.

M2225

PLC ModuleHIMA

PLC Module

The HIMA M2225 is a PLC module for industrial control. 16 digital inputs, 16 digital outputs, 4 analog inputs, 2 analog outputs; RS-232, RS-485 and Ethernet communication.

M3443

Digital Output ModuleHIMA

Digital Input/Output Module

The HIMA M3443 is a digital input/output PLC module with 16 digital inputs and 8 digital outputs. Input/output 24 VDC, DIN rail mount, IP20.

X-AI3201

Analog Input ModuleHIMA

Analog Input Module

The HIMA X-AI3201 is an analog input module for HIMax safety systems. Supply 24 VDC, current input 0.5-1.5 A, operating temperature 0 to +60 C, IP20.

X-BLK01

I/O ModuleHIMA

Blank Module for I/O Slots

The HIMA HIMax X-BLK01 is a blank module that covers unused I/O slots in HIMax safety controllers, maintaining airflow, sealing and protection. Made in Germany.

X-DI3201

Digital Input ModuleHIMA

Digital Input Module

The HIMA X-DI3201 is a 32-channel digital input module for HIMA F-series safety controllers. 24 VDC +/-20% inputs, 32 electrically isolated channels (500 Vrms), SIL 3 (IEC 61508/61511), >99% diagnostic coverage, rack-mounted.

X-FTA00201

Field Termination AssemblyHIMA

Field Termination Assembly

The HIMA X-FTA00201 is a field termination assembly for HIMax safety controllers, providing a secure interface between field devices and I/O modules. Supports passive and active two-wire transmitters. Made in Germany.

Z6012

PLC ModuleHIMA

Fan/Fuse Monitoring Module

The HIMA Z6012 module provides fan operation monitoring and fuse monitoring for HIMA H41q and H51q safety systems.

Z7116-3236-C5

Interface ModuleHIMA

Connection Module

The HIMA Z7116-3236-C5 is a connection module used with the F3236 input module.

Z7126

Central Control Unit

The HIMA Z7126 is a central control unit with quadruple modular redundancy (QMR) for high availability, safety certified up to SIL 3. Up to 128 I/O channels, Ethernet and CANopen communication, up to 200 MHz processing, 128 MB RAM, 16 MB flash; supports IEC 61508 and IEC 62304.