Parts catalogue

Analog Output Termination Board

Honeywell 51304476-125 (MU-TAOX02) analog output termination board for TDC3000/Experion process control systems.

51304476-175

Analog Output Termination Board

Honeywell 51304476-175 analog output termination board for connecting analog output signals from control systems to field devices. Screw-terminal blocks, DIN-rail or panel mount.

51304477-100

PLC ModuleHoneywell

PLC Module

Honeywell 51304477-100 process control module for TDC3000/Experion systems.

51304481-100

Low Level Analog Input Processor (LLAI IOP)

Honeywell TDC 3000 Process Manager Low Level Analog Input (LLAI) Input/Output Processor (MU-PAIL02). Converts low-level analog signals such as thermocouple/RTD inputs into digital values for the DCS.

Contact for wholesale

51304481-150

Low Level Analog Input Processor

Honeywell 51304481-150 Low Level Analog Input (LLAI) processor module for the Universal Control Network (UCN). 8 channels (4 differential pairs), input range +/-10 V, 16-bit resolution.

51304483-100

Analog Output Module

Honeywell 51304483-100 analog output module for TDC3000 and Experion PKS distributed control systems, providing analog signals to actuators, control valves and transmitters. Operating temperature -20 to +70 C.

51304485-100

Digital Input ModuleHoneywell

Digital Input Module

Honeywell 51304485-100 digital input hardware (HDW) module for Honeywell DCS. 32 digital input channels, 24 VDC nominal input, ~7 mA per channel, channel-to-system isolation.

51304485-150

Digital Input ModuleHoneywell

Digital Input Module

Honeywell 51304485-150 (MC-PD1X02) digital input module for TDC3000/Experion process control systems.

51304486-100

Digital Output Processor Board

Honeywell TDC 3000 digital output board, part of the 51304486/51304487 DO IOP (Digital Output Input/Output Processor) assembly used in Process Manager I/O.

51304487-100

Digital Output Module

Honeywell 51304487-100 digital output module providing isolated digital switching outputs for Honeywell process control systems. DIN-rail or rack mounted.

51304487-150

Digital Output Module

Honeywell 51304487-150 (MC-PDOX02) digital output module for TDC3000/Experion process control systems.

51304489-100

High-Level Analog Input Module

Honeywell 51304489-100 high-level analog input module interfacing analog input signals to Honeywell controllers. Input range 0-10 VDC, accuracy +/-0.2%, 12-bit resolution, 100 Hz sampling.

51304493-100

PM Modem Card

Honeywell 51304493-100 PM modem card for Process Manager (PM) and Advanced Process Manager (APM) controllers in the TDC3000 system, providing modem communication with the LCN. Replaces earlier card 51304163-300.

51304493-150

Process Manager Modem Card

Honeywell TDC 3000 Process Manager / APM modem card. The 51304493 family provides PM/APM modem communication on the I/O Link.

51304493-200

Advanced Process Manager Modem Card

Honeywell 51304493-200 Advanced Process Manager (APM) modem card for Honeywell TDC3000 systems, providing modem communication between APM and UCN nodes on the Universal Control Network.

51304501-100

Redundancy ModuleHoneywell

Redundancy Driver Module

Honeywell 51304501-100 redundancy driver module providing fault-tolerant dual-channel communication and automatic switchover for TDC3000 and Experion PKS distributed control systems.

51304511-100

Network Interface Module

Honeywell 51304511-100 network interface module providing communication between Honeywell process control systems and connected devices. Rack- or panel-mounted.

51304511-200

NIM Modem

Honeywell 51304511-200 Network Interface Module (NIM) modem for Honeywell TDC3000 process control systems. Input voltage 24 VDC.

51304516-100

Smart Transmitter Interface

Honeywell 51304516-100 Smart Transmitter Interface (STI) IOP for Honeywell Process Manager (PM), Advanced Process Manager (APM) and High Performance Process Manager (HPM) systems, providing data acquisition and control with redundant I/O link support.

51304516-150

Smart Transmitter Interface Processor (STI IOP)

Honeywell TDC 3000 Smart Transmitter Interface (STI) Input/Output Processor (MC-PSTX02, CE CC). Interfaces Honeywell ST3000 smart transmitters with the DCS for high-accuracy signal acquisition and diagnostics.

51304516-200

Smart Transmitter Interface Processor

Honeywell 51304516-200 UCN Smart Transmitter Interface processor for integrating and managing transmitters in Honeywell control systems. Input voltage 24 VDC.

51304518-100

ControllerHoneywell

APM Control Module

Honeywell 51304518-100 Advanced Process Manager (APM) control module for the Universal Control Network (UCN), executing regulatory, logic and sequence control functions.

51304518-150

ControllerHoneywell

Advanced Control Module

Honeywell 51304518-150 advanced process controller for distributed control systems, supporting multi-loop PID and logic control with Ethernet 10/100 and optional RS-485 communication.

51304525-100

HPM Control Card

Honeywell 51304525-100 high-performance control card for Honeywell DCS. Input/output 24 VDC, 1 A output, dimensions 146 x 105 x 27 mm, operating range -20 to +70 C.

51304537-100

CNI I/O Board

Honeywell 51304537-100 CNI I/O board for the TDC3000 system, providing Ethernet transceiver connectivity (15-pin connector, up to 50 m) for the Plant Network Module.

51304537-200

CNI Input/Output Board

Honeywell TDC 3000 CNI (Control Network Interface) input/output board used for control network communication in the DCS.

51304540-100

LCN Extender Paddle Board (LCNE2)

Honeywell TDC 3000 LCNE2 paddle board used to extend the Local Control Network (LCN) to a remote location over fiber-optic cable.

51304540-200

LCN Communication Module

Honeywell 51304540-200 communication/paddle board module for the TDC3000 DCS, providing fiber-optic data transmission over the Local Control Network (LCN). 24 VDC supply.

51304544-100

KLCN I/O Card

Honeywell 51304544-100 KLCN I/O card supporting Local Control Network (LCN) communication in Honeywell TDC3000/TPS distributed control systems.

51304584-100

EPDGP I/O Board

Honeywell 51304584-100 EPDGP I/O peripheral interface board for Honeywell Universal Stations in the TDC3000 DCS, providing video, keyboard, cursor, printer and external drive connectivity. Rev G or above required for Bernoulli/Zip drives.

51304584-200

I/O Control Board

Honeywell 51304584-200 I/O control board interfacing input/output signals with Honeywell TDC3000 DCS and compatible systems.

51304584-300

I/O ModuleHoneywell

EPDGP I/O Module

Honeywell 51304584-300 EPDGP I/O module for Z-Console integration in Honeywell Universal Stations (EPDG/EPDG2), supporting video, cursor control and keyboard interfaces.

51304638-600

Analog Output Galvanic Isolator

Honeywell 51304638-600 analog output galvanic isolator module for TDC3000 DCS, providing electrical isolation between analog output signals and field devices to prevent ground loops and interference.

51304640-125

Digital Input ModuleHoneywell

Digital Input Field Termination Assembly

Honeywell 51304640-125 Digital Input Field Termination Assembly (FTA), 32 input channels, compression terminals, 307 mm size, CE compliant (non conformally coated), redundancy supported. Use with galvanic isolation module 51191699-100 (MTL4016).

51304642-175

I/O ModuleHoneywell

I/O Module

Honeywell 51304642-175 I/O module for Honeywell Experion PKS / TDC3000 control platforms, providing signal processing with built-in diagnostics and hot-swappable design.

51304648-100

Digital Output Module

Honeywell 51304648-100 UCN digital output module for Honeywell TDC3000 Universal Control Network.

51304648-125

Digital Output Field Termination Assembly

Honeywell TDC 3000 Digital Output (DO) Field Termination Assembly, 16-channel 120/240Vac, used to terminate digital output field wiring to the DO IOP.

51304648-175

Digital Output Field Termination Assembly

Honeywell TDC 3000 Digital Output (DO) Field Termination Assembly, 16-channel compatible 120/240Vac (MC-TDOA13, CE CC).

51304650-100

Digital Output Field Termination Assembly

Honeywell 51304650-100 (MU-TD0D13) Digital Output Field Termination Assembly for TDC3000 and Experion PKS systems, 16 digital output channels, 24 VDC.

51304650-150

Digital Output Field Termination Assembly

Honeywell TDC 3000 Digital Output (DO) Field Termination Assembly, 3/30Vdc solid state (MC-TDOD13).

51304672-100

Analog Output Processor Module

Honeywell 51304672-100 analog output module for industrial process control, delivering analog signals to actuators, control valves and field equipment. 4 independent outputs, 0-10 V or 4-20 mA signal range, DIN-rail mounting, -20 to +70 C.

51304672-150

Analog Output Module

Honeywell 51304672-150 analog output module for Honeywell DCS platforms, providing analog signal transmission to actuators and field devices.

51304685-200

RP Communication Module

Honeywell 51304685-200 RP communication module for Honeywell TDC3000 process control systems.

51304718-150

I/O ModuleHoneywell

I/O Hardware Configuration Module

Honeywell 51304718-150 I/O hardware configuration module for configuring analog input channels in Honeywell C200 and PM I/O systems. HLAI/STI HART support, accuracy +/-0.10% full-scale, RS485, 100 mA, 126 x 88 x 200 mm.

51304724-175

Digital Output Module

Honeywell 51304724-175 (MC-GRPA01) digital output module for Honeywell process control systems.

51304754-100

High Level Analog Input Processor (HLAI IOP)

Honeywell TDC 3000 Process Manager High Level Analog Input (HLAI) Input/Output Processor, 16 inputs (HLAI2 IOP 16 CE). Accepts high-level analog signals (4-20mA / voltage) for the DCS.

51304754-150

High Level Analog Input Processor

Honeywell 51304754-150 (MC-PAIH03) High Level Analog Input (HLAI) processor module for Honeywell control systems.

51304754-175

High Level Analog Input Processor (HLAI IOP)

Honeywell TDC 3000 Process Manager High Level Analog Input (HLAI) Input/Output Processor, 16 inputs (MC-PAIH03, CE CC). Accepts high-level analog signals for the DCS.