Parts catalogue

Control Firewall Module (CC-PCF901)

Honeywell 51405047-175 (CC-PCF901) Control Firewall module for Honeywell Experion C300 control systems.

51405098-100

LCNP4E Card

Honeywell 51405098-100 LCNP4E card for Honeywell GUS/Experion LCN systems, acting as a logic solver within a Safety Instrumented System. BACnet/IP and LonWorks support.

51410070-275

Analog Output ModuleHoneywell

Analog Output Module (CC-PAOH51)

Honeywell 51410070-275 (CC-PAOH51) analog output module for Honeywell Experion control systems.

51410087-175

Fieldbus ModuleHoneywell

Fieldbus Interface Module (CC-PFB801)

Honeywell 51410087-175 (CC-PFB801) Foundation Fieldbus interface module for Honeywell Experion control systems.

Contact for wholesale

51451432-010

Process Solutions Module

Recognized manufacturer reference available for industrial supply enquiry.

51454192-150

PWA I/O Link Module

Honeywell 51454192-150 PWA/I/O link module serving as an interface between field devices and the central control unit for data communication and real-time monitoring. Rack-mounted, uses Honeywell proprietary protocol.

51454307-100

Interface ModuleHoneywell

EHPM02 Interface Module

Honeywell EHPM02 interface module, part number 51454307-100, Rev A. 24 V DC; operating temperature -40 C to 70 C. Designed for industrial process control systems to provide interface communication between the EHPM02 module and connected components.

51454405-175

Digital Input ModuleHoneywell

CC-PDIL51 Digital Input Module

Honeywell 51454405-175 CC-PDIL51 digital input module for Experion / Series C control systems.

51454416-200

Field Termination AssemblyHoneywell

Digital Input Termination Assembly

Honeywell 51454416-200 digital input termination assembly providing a termination point for 24 VDC digital input signals to the control system. Part of the Experion PKS system; fanless operation.

51454460-100

Carrier / Mounting BaseHoneywell

Mounting Plate

Honeywell 51454460-100 mounting plate for attaching components within Honeywell Series 8 architecture. Approx. 3 cm x 31.3 cm x 27.8 cm, industrial-grade construction.

51454460-200

16-Channel Analog Input Module

Honeywell 51454460-200 analog input module converting analog signals (temperature, pressure, flow) into digital values. 16 independent analog input channels, integrated 24V loop power, -20 C to +70 C. Integrates with Experion LX DCS.

51454460-300

I/O Card

Honeywell 51454460-300 I/O card from the TDC 3000 series for data input and output. NEMA 4X enclosure rating; supports redundant power supplies. Integrates with the Experion C300 system.

51454475-100

C300 RAM Charger Module

Honeywell 51454475-100 Series 8 RAM charger module providing backup power to the C300 controller memory to retain data during a primary power failure. Battery-powered; supports redundancy with two modules/IOTAs.

51454832-100

Processor ModuleHoneywell

UEA Processor Module

Honeywell 51454832-100 UEA processor module for legacy distributed control systems including TDC 3000 / Experion LCN. Executes control logic and manages I/O coordination; rack-mounted in standard UEA slot.

51454833-100

Field Termination AssemblyHoneywell

UEA Termination Assembly

Honeywell 51454833-100 UEA termination assembly for the Experion / PlantScape / TPN system architecture. Acts as the termination point for field signals between process equipment and Honeywell controllers; rack or cabinet mounted.

51506303-200

Control Processor ModuleHoneywell

Control Processor Module

Honeywell 51506303-200 control processor module for industrial automation. High-speed microprocessor with integrated memory; -25 C to +60 C. Integrates with Honeywell DCS and PLC systems.

51507429-200

UCN Series Module

Recognized manufacturer reference available for industrial supply enquiry.

5401100

Carrier / Mounting BaseHoneywell

Sensor Baseboard Module

Honeywell 5401100 industrial baseboard hosting and connecting Honeywell sensors within distributed/quality control systems (DCS/QCS). Provides mechanical mounting and electrical interface for sensor modules; used in paper, plastics and chemical processing.

620-0024

Memory Module

Honeywell IPC 620 24K memory module that expands processor memory capacity in the IPC 620 programmable controller system.

620-0027

Memory Module

Recognized manufacturer reference available for industrial supply enquiry.

620-0053

Expansion ModuleHoneywell

I/O Expander Module

Honeywell 620-0053 I/O expander module for Honeywell UCN systems, adding 8 digital input and 8 digital output channels. 24 VDC.

620-0054

System Control Module

Honeywell 620-0054 system control module for the IPC 620 series. Manages communication between processor components and executes relay logic; universal I/O programming device.

620-0054-VR-1-0

System Control Module

Recognized manufacturer reference available for industrial supply enquiry.

620-0056

Register Board

Recognized manufacturer reference available for industrial supply enquiry.

620-0059

Redundancy ModuleHoneywell

Redundancy Control Module

Honeywell 620-0059 redundancy control module providing fault-tolerant operation for legacy control systems (TDC 2000/3000). Monitors system health and manages switchover between redundant processors; hot-swappable, rack-mounted.

620-0059-VR-2-2

Redundancy ModuleHoneywell

Redundancy Control Module

Recognized manufacturer reference available for industrial supply enquiry.

620-0073C

Distribution Board

Honeywell 620-0073C distribution board for signal routing and module interfacing within TDC 3000 / Experion PKS control systems. Routes field wiring to system I/O modules.

620-0073C-Y838138600008

Ethernet Loop Processor Module

Honeywell Ethernet loop processor module, sub-assembly 620-0073C-Y838138600008.

620-0080

PLC CPU ModuleHoneywell

Processor Module

Honeywell IPC 620-25/35 processor module providing the CPU and diagnostic functions for the IPC 620 programmable controller. VR3.1 firmware revision.

620-0081

Data Hiway Interface Module

Honeywell 620-0081 module establishing a connection between a Honeywell 620 Series processor and a TDC 3000 system. Supports peer-to-peer and host-slave communication; 24 VDC.

620-0085

I/O Control Module

Honeywell 620-0085 high-capacity I/O control module for IPC 620 systems, managing data flow between the processor and the 621 I/O subsystem. Supports up to 2048 I/O points; compatible with IPC 620-25 and 620-35 systems.

620-0086

Parallel Link Driver Module

Honeywell 620-0086 rack-mounted parallel link driver module enabling parallel synchronous data transfer within Honeywell 620 series control platforms. Connects main controllers to peripheral systems or extended I/O racks; up to 100 m cabling.

620-0088

Parallel Link Drive Module

Honeywell 620-0088 parallel link drive module, a communication interface card for the IPC 620 series providing high-speed parallel data transfer between processors and I/O racks.

620-0090

Chassis / RackHoneywell

8-Slot Processor Rack

Honeywell 620-0090 8-slot ISSC/SSEC processor rack chassis for IPC-620 control systems, providing the structural and electrical framework for mounting processor and I/O modules. CE/UL certified.

620-0636

Processor ModuleHoneywell

Processor Module

Honeywell 620-0636 processor module (CPU) for Honeywell 620 series distributed control systems including TDC 2000 and TDC 3000. Battery-backed SRAM/EEPROM memory; analog and digital I/O via backplane bus.

620-1536

Processor ModuleHoneywell

Processor Module

Honeywell 620-1536 processor module for 620/621 control systems. 24 VDC; Ethernet/Modbus/DeviceNet communication; digital and analog I/O support; DIN-rail or panel mounting.

620-1633

Control Processor ModuleHoneywell

Control Processor Module

Honeywell 620-1633 control processor module for Honeywell 620 Series, TDC 2000 and TDC 3000 distributed control systems. High-speed proprietary microprocessor; 1 MB RAM expandable; serial and Ethernet ports.

621-0000

Analog Input Module

Honeywell 621-0000 analog input module for Honeywell distributed control systems. 8 independent analog input channels; 12-bit resolution; accuracy <0.4% of PSR at 25 C; 75 us conversion per channel.

621-0004

System Data Module

Honeywell 621-0004 system data module (SDM) for Honeywell distributed control systems. Voltage/current/digital inputs; Modbus, HART, Profibus communication; built-in diagnostics.

621-0008

Pulse/High-Speed Counter ModuleHoneywell

Pulse Input Module

Honeywell 621-0008 pulse input module (PIM) for Honeywell 620/621 distributed control systems. Captures high-frequency digital pulses; 8 channels; up to 100 kHz; 16-bit counter per input.

621-0020R

Universal Analog Input Module

Recognized manufacturer reference available for industrial supply enquiry.

621-0021

Enhanced Diagnostic I/O Module

Honeywell 621-0021 rack-mounted enhanced diagnostic / I/O module for Honeywell industrial control systems (TDC 3000, Experion PKS legacy). Handles analog/digital signal acquisition and output control with built-in diagnostics; RS-485, RS-232, Ethernet, Modbus, HART.

621-0022

Isolated Analog Input Module

Honeywell 621-0022 isolated analog input module. 8 isolated analog input channels; configurable 0-10 VDC range. Works with Honeywell IPC 620 and ISSC 600 systems.

621-0022-RC

8-Channel Isolated Analog Input Module

Honeywell 621-0022-RC isolated analog input module for Honeywell 620 series PLC/DCS systems. 8 isolated analog inputs; channel-to-channel and channel-to-bus isolation; 24 Vdc nominal.

621-0307

Counter ModuleHoneywell

High-Speed Counter Module

Honeywell 621-0307 high-speed counter module for industrial event counting. 24 VDC; -40 C to 85 C operating temperature. Integrates with Honeywell control systems.

621-1100RC

Digital Input ModuleHoneywell

Digital Input Module

Honeywell 621-1100RC digital input module from the 620 Series interfacing high-voltage AC signals. 8 input points; 90-140 V AC; contact-closure / open-close signal type.

621-1180R

Digital Input ModuleHoneywell

Digital Input Module

Honeywell 621-1180R PLC digital input module for Honeywell 620 series. 32 TTL-level (5 Vdc) digital inputs; rack-mounted with backplane bus interface.

621-1201

Circuit Board

Honeywell 621-1201 circuit board for Honeywell TDC 3000 and IPC 620 control systems, providing signal routing and processing. Industrial-grade; 0 C to +60 C.