Parts catalogue

Safe Loop-Monitored Digital Output Module

The Honeywell FS-SDOL-0424 is a digital output module with 4 independent channels at 24 VDC, 1.0 A per output. Provides loop monitoring with wire-break and short-circuit detection; 1500 VAC dielectric strength.

FS-SDOL-0448

Safe Loop-Monitored Digital Output Module

The Honeywell FS-SDOL-0448 is a safe loop-monitored digital output module with 4 channels rated 48 VDC, 0.5 A for Honeywell Safety Manager systems.

FS-SMSB-1534D-N

Carrier / Mounting BaseHoneywell

Safety Manager System Base Module

The Honeywell FS-SMSB-1534D-N is a Safety Manager System Base Module that mounts and connects safety I/O modules in Honeywell Safety Manager / FSC systems. SIL 3 (IEC 61508) compliant.

FS-SMSB-ST-100

Software LicenseHoneywell

Safety Builder R100.3 Basic Software

Honeywell Safety Builder R100.3 basic software for Windows 2000/XP, used to configure Honeywell Safety Manager systems.

FS-SMSB-ST-110

Software LicenseHoneywell

Safety Builder R110.2 Basic Software

Honeywell Safety Builder R110.2 basic software for Windows 2000/XP, used to configure Honeywell Safety Manager systems.

FS-SMSB-ST-120

Software LicenseHoneywell

Safety Builder R120.3 Basic Software

Honeywell Safety Builder R120.3 basic software for Windows 2000/XP, used to configure Honeywell Safety Manager systems.

FS-TDO-1624

Safe Digital Output Module

The Honeywell FS-TDO-1624 is a safe digital output module with 16 channels at 24 Vdc (18-32 Vdc range), 2 A per channel, with sourcing/sinking transistor outputs and Ethernet/IP and Modbus TCP/IP support for safety instrumented systems.

FS-TDOL-07120

Loop-Monitored Digital Output FTA

The Honeywell FS-TDOL-07120 is a loop-monitored digital output field termination assembly with 7 channels rated 120 V.

FS-TERM-0001

Bus CouplerHoneywell

Bus Terminator

The Honeywell FS-TERM-0001 is a bus terminator for Honeywell Safety Manager / FSC control system buses.

FS-TIDI-1624

Digital Input Module

The Honeywell FS-TIDI-1624 is a digital input module with 16 channels at 24 VDC for Honeywell Safety Manager systems.

FS-TRO-0824

Digital Output Relay FTA

The Honeywell FS-TRO-0824 is a digital output (relay contact) field termination assembly with 8 NO/NC channels for Honeywell control systems.

FS-TRO-1024

Digital Output Relay FTA

The Honeywell FS-TRO-1024 is a digital output (relay contact) field termination assembly with 10 channels for Honeywell control systems.

FS-TSAI-0410

Safe Analog Input Module FTA

The Honeywell FS-TSAI-0410 is a safe analog input field termination assembly with 4 channels for Honeywell Safety Manager systems.

FS-TSAI-1620M

Safe Analog Input Module FTA

The Honeywell FS-TSAI-1620M is a safe analog input field termination assembly with 16 channels (2 groups of 8), 0-25 mA input current, 250 ohm input resistance, rated SIL 3 (IEC 61508). DIN rail mountable.

FS-TSAO-0220M

Analog Output ModuleHoneywell

Safe Analog Output Module FTA

The Honeywell FS-TSAO-0220M is a safe analog output field termination assembly with 2 channels for Honeywell Safety Manager systems.

FS-TSDI-16115

Digital Input Field Termination Assembly

The Honeywell FS-TSDI-16115 is a FieldSafe digital input field termination assembly for Honeywell Safety Manager systems.

FS-TSDI-1624

Safe Digital Input FTA

The Honeywell FS-TSDI-1624 is a digital input field termination assembly with 16 optically isolated channels at 24 VDC for Safety Manager systems. DIN rail or rack mountable.

FS-TSDI-1624C

Safe Digital Input FTA

The Honeywell FS-TSDI-1624C is a conformal-coated safe digital input field termination assembly for Honeywell Safety Manager systems.

FS-TSDI-1648

Digital Input FTA

The Honeywell FS-TSDI-1648 is a digital input field termination assembly with 16 channels at 48 VDC for Honeywell Safety Manager systems.

FS-TSDI-16UNI

16-Channel Digital Input Field Termination Assembly

The Honeywell FS-TSDI-16UNI is a 16-channel digital input field termination assembly (2 groups of 8) rated up to 150 VDC, with 250 mA fuse protection per group and DIN rail snap-in mounting. A conformal-coated version (FC-TSDI-16UNI) is also available.

FS-TSDO-0424

Safe Digital Output Module FTA

The Honeywell FS-TSDO-0424 is a safe digital output field termination assembly with 4 channels at 24 VDC for Honeywell Safety Manager systems.

FS-TSDO-04UNI

Safe Digital Output Module FTA

The Honeywell FSC FS-TSDO-04UNI is a safe digital output field termination assembly providing isolated digital outputs with fast switching for time-critical safety applications. Compatible with Honeywell FSC safety systems.

FS-TSDO-0824

Safe Digital Output Field Termination Assembly

The Honeywell FSC FS-TSDO-0824 is a fail-safe digital output FTA with 8 isolated channels at 24 VDC nominal for Honeywell Safety Manager and FSC systems, controlling actuators, relays, and solenoids. Operating range -20 C to +65 C.

FS-TSFIRE-1624

Fire System Analog Input Module FTA

The Honeywell FS-TSFIRE-1624 is a 16-channel analog input field termination assembly for fire systems, 0-10 VDC / 4-20 mA input, 12-bit resolution, +-0.1% FS accuracy, 600 VAC insulation.

FS-TSGAS-1624

Gas System Digital Input Field Termination Assembly

The Honeywell FS-TSGAS-1624 is a digital input field termination assembly for gas detection systems within Honeywell Safety Manager.

FS-TSHART-1620M

Safety Interface Module (HART)

The Honeywell FS-TSHART-1620M is a HART safety interface module with 16 channels for Honeywell Safety Manager systems.

FS-TSRO-0824

Digital Output Field Termination Assembly

The Honeywell FS-TSRO-0824 is a digital output (relay) field termination assembly with 8 channels for Honeywell Safety Manager systems.

FS-TSRO-08UNI

Digital Output Field Termination Assembly

The Honeywell FS-TSRO-08UNI is a universal digital output (relay) field termination assembly with 8 channels for Honeywell Safety Manager systems.

FS-USI-0001

Universal Safety Interface Module

The Honeywell FS-USI-0001 is a Universal Safety Interface Module for Honeywell Safety Manager and Experion PKS systems, with a Motorola 8260 communication processor, 8 MB flash, hardware firewall, and flash-updatable firmware. 5 VDC supply.

FTA-E-01

Fail-Safe Digital Input Field Termination Assembly

The Honeywell FTA-E-01 is a fail-safe digital input field termination assembly with 24 channels, input 24 VDC to 230 VAC/DC, 4-20 mA range, 1500 VDC isolation, IP65 rated.

FTA-E-02

Fail-Safe Digital Output Field Termination Assembly

The Honeywell FTA-E-02 is a fail-safe digital output field termination assembly with 24 relay-contact channels, 24 VDC input, 500 mA per channel, 1500 VDC isolation.

FTA-T-01

Fail-Safe Digital Input Module

The Honeywell FTA-T-01 module interfaces system interconnection cables (SICs) with external field wiring. It provides 24 channels at 24/48/60 VDC with built-in surge protection and isolation, RS485 communication, DIN rail mounting.

FTA-T-02

Fail-Safe Digital Output FTA

The Honeywell FTA-T-02 is a fail-safe digital output field termination assembly with 24 channels (6 groups of 4) at 24/48/60 Vdc, 2 A continuous per channel. CE and UL approved, DIN rail mountable.

FTA-T-04

Fail-Safe Digital Output Module

The Honeywell FTA-T-04 is a digital output module with 25 isolated relay-contact channels for safety-critical applications, controlling valves, actuators, and alarms.

FTA-T-08

Fail-Safe Digital Output (Relay) FTA

The Honeywell FTA-T-08 is a fail-safe digital output (relay) field termination assembly with 4 channels, dual redundant relays per channel, silver-alloy fused contacts, and LED status indication. CE, TUV, UL approved.

FTA-T-14

Analog Input FTA Module

The Honeywell FTA-T-14 is an analog input field termination assembly with 16 isolated channels for process automation, compatible with Honeywell Experion and TDC systems. DIN rail or panel mountable.

FTA-T-16

Fail-Safe Active Digital Input Module

The Honeywell FTA-T-16 is a fail-safe active digital input module with 16 discrete channels at 24 VDC or 120 VAC, ~10 mA per channel, 10 kohm input resistance, for Honeywell Safety Manager and FSC systems.

FTA-T-17

Digital Output Relay Module

The Honeywell FTA-T-17 is a digital output relay module for Fail Safe Control (FSC) AK5/AK6 systems, with 4 isolated channels, triple-redundant fused NO relays per channel, and LED status indicators. CE, TUV, UL508, CSA certified.

FTA-T-18

Fail-Safe Digital Input Module

The Honeywell FTA-T-18 is a fail-safe digital input module with 16 channels at 24 VDC, used in safety instrumented systems and emergency shutdown applications to monitor flame detectors, gas sensors, and emergency switches. Compatible with Honeywell UCN and DCS platforms.

FTA-T-21

Digital Input Field Termination Assembly

The Honeywell FTA-T-21 is a digital input field termination assembly with 16 or 21 channels at 24 VDC, channel-to-channel isolation, for Honeywell Safety Manager and Experion systems. DIN rail or rack mountable.

FTEB01

FTE Bridge Module

The Honeywell FTEB01 is a Fault Tolerant Ethernet (FTE) bridge module for Honeywell DCS / Experion control networks.

FTEB01-51309512-125

FTE Bridge Module

The Honeywell FTEB01 (51309512-125) is a Fault Tolerant Ethernet (FTE) bridge module for Honeywell Experion control networks.

FTEB01-51309512-175

FTE Bridge Module

The Honeywell FTEB01 (51309512-175) is a Fault Tolerant Ethernet (FTE) bridge module for Honeywell Experion control networks.

FX-USI-0002

Universal Safety Interface Module

The Honeywell FX-USI-0002 is a Safety Manager System Module (universal safety interface) for high-integrity applications such as emergency shutdown and fire/gas protection. 5 VDC supply (max 1.2 A), certified SIL 3.