Parts catalogue

Power Conditioning PWA Board

Honeywell 51307106-175 is a high-performance I/O Link interface processor (HPMM interface to its I/O subsystem) with reverse polarity protection, engineering unit conversion, and redundant I/O Link. 16 channels.

51307149-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51307186-175

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51307186-275

Header Board

Honeywell 51307186-275 (Rev. E) is a logic interface / header board for industrial control systems, certified for hazardous (Zone 2) environments. 94V-0 flame rating, paired with PWB 51307185-100.

Contact for wholesale

51307190-150

HPM I/O Link PC Board

Honeywell 51307190-150 is an HPM I/O Link PC board (EHPM communication module) facilitating data transfer between Honeywell field I/O modules (IOPs) and the control system. CE/TUV/UL approved.

51307616-176

DC-TFB402 Field Termination Board

Honeywell 51307616-176 (DC-TFB402) is a field termination board for Honeywell control systems.

51307687-176

PM AI High-Level Analog Input Motherboard

Honeywell 51307687-176 is a High-Level Analog Input (HLAI) motherboard interfacing analog input modules in Honeywell DCS systems. Up to 16 analog input channels, single-ended or differential. Compatible modules MC-PAIH03, MU-PAIH03.

51308012-100

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51308016-106

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51308019-100

TDC 3000 DCS Module

Honeywell TDC 3000 distributed control system module from the legacy TDC 2000/3000 process control hardware line.

51308020-200

Monitor AC Power Cable

Honeywell 51308020-200 is a monitor AC power cable for Honeywell control system displays.

51308035-100

Communication ModuleHoneywell

Control Network Interface Module

Honeywell TDC 3000 / TPS Control Network Interface (CNI) board, providing network interface for the process control network. Used in legacy Honeywell DCS systems.

51308047-100

Universal Station Touchscreen Interface Cable

Honeywell 51308047-100 is a touchscreen interface cable for Universal Station operator consoles in TDC 3000 systems. Shielded industrial communication cable with factory-terminated connectors for stable signal transmission.

51308051-200

Enclosure DC Power Cable

Honeywell 51308051-200 is a DC power cable for industrial control panels and distributed control systems, providing consistent voltage transmission for control equipment in automation enclosures.

51308052-200

ControllerHoneywell

Industrial Control Module

Honeywell 51308052-200 industrial control module operating at 24V DC, supporting MODBUS RTU, PROFIBUS and EtherNet/IP, with 16 digital inputs and 8 digital outputs. Operating temperature -20 to +70 C, IP20 enclosure.

51308058-100

Keyboard Interface Cable

Honeywell 51308058-100 is a keyboard interface cable for operator workstations in TDC3000 distributed control systems, rated 24V DC with EMI/RFI shielding and proprietary Honeywell connectors.

51308071-200

PLC ModuleHoneywell

Industrial PLC Control Module

Honeywell 51308071-200 is a PLC control and system interface module for TDC 3000 and Universal Station platforms, providing control signal processing with EMI/RFI-protected plug-in construction for Honeywell backplane assemblies.

51308092-200

Power CableHoneywell

TDC 3000X AC Power Cord

Honeywell 51308092-200 is an industrial AC power cable for XC3000 and TDC 3000X control systems. Rated 250V AC, 10A, 2 metres long, providing stable power delivery to Honeywell modules.

51308093-300

Power CableHoneywell

TDC 3000 AC Power Entry Panel Cable

Honeywell 51308093-300 is an AC power entry panel cable for TDC 3000 control systems. Rated 250V AC, 10A, 89 cm (35 in) long, for secure power connectivity between system components and external power sources.

51308093-600

Analog Input Module

Honeywell 51308093-600 analog input module for TDC3000-series control systems.

51308094-300

Power CableHoneywell

TDC 3000 AC Power Cord

Honeywell 51308094-300 is an AC power cord for TDC 3000 industrial control systems. Rated 250V AC, 15A, 2 metres long, for reliable power delivery to control components.

51308095-100

Communication ModuleHoneywell

I/O Interface Module

Honeywell 51308095-100 is an I/O interface/expansion module for TDC3000 distributed control systems, supporting analog and digital I/O and enabling field-device signal integration. Dimensions 216 x 160 x 30 mm.

51308097-100

I/O ModuleHoneywell

Input/Output Module

Honeywell 51308097-100 input/output module for the TDC 3000 distributed control system, providing signal interface between the controller and field devices.

51308097-200

Universal Station Touch Control Cable

Honeywell 51308097-200 is a touch control cable for Universal Station operator consoles in TDC 3000 systems. Shielded, low-noise industrial communication cable with factory-terminated connectors.

51308099-100

PLC ModuleHoneywell

Plug-In Module

Honeywell 51308099-100 plug-in module, input voltage 24V DC, 120 VAC / 0.5 A / 60 Hz, dimensions 2.5 x 2.5 x 1 in, for TDC3000-series industrial control systems.

51308103-003

Printer Cable

Honeywell 51308103-003 printer/communication cable, 3 metre length, for TDC3000-series control systems.

51308105-400

Memory ModuleHoneywell

Controller Memory Backup Module

Honeywell 51308105-400 is a controller memory backup module for the C300 Distributed Control System. Mounted on the controller, it preserves volatile memory during power loss for rapid recovery. 128 MB capacity, supports up to two C300 controllers.

51308111-002

LCN Connection Cable

Honeywell 51308111-002 is a multi-core shielded connection cable for DCS racks, I/O modules, operator panels and sensors on the Honeywell Local Control Network. 12-core tin-plated AWG24 copper, PTFE insulation, M12 8-pin connectors, IP67, 2 m (customisable).

51308112-003

LCN Coaxial Cable Set, 3 m

Honeywell 51308112-003 is a 3 metre LCN coaxial cable set for Local Control Network communication in TDC3000 systems. RG11 coax with ferrite filters for EMI suppression.

51308112-005

LCN Coaxial Cable Set, 5 m

Honeywell 51308112-005 is a 5 metre LCN coaxial cable set for Honeywell Local Control Network systems. RG11 with ferrites, 75 ohm impedance, 300V AC rating, -40 to +85 C.

51308112-008

LCN Coaxial Cable Set, 8 m

Honeywell 51308112-008 is an 8 metre LCN coaxial cable set for the Local Control Network in Experion and TDC 3000 systems. RG-11 coaxial with ferrite beads for high-frequency noise suppression. Supersedes 51109181-008.

51308112-015

LCN A/B Coaxial Cable Set, 15 m

Honeywell 51308112-015 is a 15 metre LCN A/B coaxial cable set for Local Control Network communication in TDC3000 systems. RG11 coax with ferrite filters. Direct upgrade from legacy 51109181-015.

51308112-020

LCN Coaxial Cable Set, 20 m

Honeywell 51308112-020 LCN coaxial cable set, 20 metre length, for Local Control Network communication in TDC3000 systems.

51308112-100

PLC Communication Cable, 200 m

Honeywell 51308112-100 is a 200 metre PLC communication cable for industrial automation, providing connectivity between programmable logic controllers and field/I/O modules with EMI-resistant shielding.

51308112-300

LCN Coaxial Cable Set

Honeywell 51308112 series Local Control Network (LCN) coaxial cable set for data transmission between LCN nodes in TDC 3000 and Experion PKS distributed control systems.

51308301-175

Field Termination AssemblyHoneywell

Control Firewall I/O Termination Assembly

Honeywell 51308301-175 CC-TCF901 is a Control Firewall (CF9) I/O termination assembly for the C300 / Experion process control system.

51308307-175

Field Termination AssemblyHoneywell

C300 Controller I/O Termination Assembly

Honeywell 51308307-175 CC-TCNT01 is a C300 controller I/O termination assembly for the Experion process control system.

51308353-175

Analog Output ModuleHoneywell

Analog Output Module

Honeywell 51308353-175 CC-TAOX11 analog output module for the C300 / Experion process control system.

51308361-175

Analog Output ModuleHoneywell

Analog Output Module

Honeywell 51308361-175 analog output module for legacy TDC 3000 control systems, delivering current-based analog outputs (0 to 195 mA) to field devices such as actuators and control valves. Rack-mounted, 24 VDC.

51308363-175

Analog Input Module

Honeywell 51308363-175 CC-TAIX01 analog input module for the C300 / Experion process control system.

51308363-175

HART Analog Input Module

Honeywell CC-TAIX01 16-channel HART-enabled analog input module for the Experion PKS Series C / C300 control system, accepting 4-20 mA and voltage inputs.

51308365-175

Redundant Analog Input IOTA

Honeywell 51308365-175 CC-TAIX11 redundant analog input IOTA (termination assembly) for the C300 / Experion process control system.

51308371-175

Communication ModuleHoneywell

Control Firewall Module

Honeywell 51308371-175 CC-PCF901 Control Firewall module for the C300 / Experion process control system.

51308373-175

Digital Output ModuleHoneywell

Digital Output Termination Module

Honeywell 51308373-175 CC-TDOB11 digital output termination module for the C300 / Experion process control system.

51308376-175

Digital Output ModuleHoneywell

Digital Output Relay Module

Honeywell 51308376-175 CC-TDOR11 digital output relay module for the C300 / Experion process control system.

51308380-175

Digital Output ModuleHoneywell

Digital Output Relay Module

Honeywell 51308380-175 CC-SDOR01 digital output relay module for the C300 / Experion process control system.

51308380-175

Relay Output ModuleHoneywell

Digital Output Relay Extension Module

Honeywell CC-SDOR01 32-channel non-redundant digital output relay extension IOTA for Experion PKS Series C I/O, providing isolated dry-contact relay outputs.

51308386-175

Digital Input ModuleHoneywell

Digital Input Module

Honeywell 51308386-175 CC-TDIL01 digital input termination module for the C300 / Experion process control system.