Parts catalogue

FC-USI General Safety Interface Module V1.3

Honeywell FC-USI general safety interface module, hardware version V1.3, for the Safety Manager system.

FC-USI-0002

Universal Safety Interface Module

The Honeywell FC-USI-0002 module enables communication between the Safety Manager and external devices via four independent channels with dual-speed Ethernet transceivers, a hardware firewall and 256 KB shared RAM.

FC-USI-0002

FC-USI Safety Manager System Module

Honeywell FC-USI Safety Manager system module (USI = Universal Safety Interface).

FC-USI-0002 V1.0

FC-USI Safety Manager System Module V1.0

Honeywell FC-USI Safety Manager system module, hardware version V1.0.

Contact for wholesale

FC-USI-0002-DCS

FC-USI DCS Module

Honeywell FC-USI DCS module for the Safety Manager system.

FC1000B1001

General Safety Interface Module

Honeywell FC1000B1001 general safety interface module for industrial safety systems.

FCX132

Card Rack Chassis

The Honeywell FCX132 is a card rack chassis for Honeywell control systems.

FE-USI-0002

Universal Safety Interface Module

The Honeywell FE-USI-0002 module integrates non-Honeywell safety devices into the Honeywell Safety Manager system, supporting up to 16 inputs and 16 outputs at 5V DC.

FF-SRE30812-C

RelayHoneywell

Safety Relay Expansion Module

The Honeywell FF-SRE30812-C is a safety relay expansion module for machine safety applications, providing 8PST (7NO/1NC) relay contacts with 24 VDC coil. Rated AC15 250V/5A, DC13 24V/2A. CE and UL certified.

FF-SRS59252

RelayHoneywell

Safety Relay Module

The Honeywell FF-SRS59252 is a high-integrity safety relay module providing SPDT switching rated 10A @ 240VAC, operating at 12-24V DC, for emergency stop and fault isolation functions. IP65 rated.

FFIF01

Fieldbus Interface Module

The Honeywell FFIF01 is a fieldbus interface module for Honeywell control systems.

FFRU01-51309550-275

Power Supply Board

The Honeywell FFRU01 is a power supply board for Honeywell control systems.

FGM-2001

Gas DetectorHoneywell

RAEGuard 2 PID Fixed Gas Monitor

Honeywell (RAE Systems) RAEGuard 2 PID fixed gas monitor, model FGM-2001, for VOC detection.

FGM-6300S

Gas DetectorHoneywell

Fixed Gas Detector

The Honeywell FGM-6300S is a fixed gas detector for hazardous industrial settings, continuously monitoring for flammable and toxic gases such as methane, carbon monoxide and hydrogen sulfide. SIL compliant.

FOED02-51197564-200

Optical Link ModuleHoneywell

UCN Fiber Optic Extender

The Honeywell FOED02 (51197564-200) is a UCN fiber optic extender for Honeywell TPS distributed control systems.

FPCXX2

Power Supply Module

The Honeywell FPCXX2 is a power supply module for Honeywell control systems.

FPD012-24V

Power Box

The Honeywell FPD012-24V is a 24V power box for Honeywell control systems.

FPDXX2

Power Supply Module

The Honeywell FPDXX2 is a power supply module for Honeywell control systems.

FS-16DI-RL

Terminal BoardHoneywell

Relay Input Terminal Board

The Honeywell FS-16DI-RL is a 16-channel isolated relay input terminal board for Honeywell control systems, with LED status indication. DIN rail or panel mount.

FS-BKM-0001

BatteryHoneywell

Battery and Key Switch Module

The Honeywell FS-BKM-0001 battery and key switch module provides access control for industrial equipment, rated 12V DC with SPST switching. IP67 rated.

FS-BLIND-IO

CoverHoneywell

Dummy Communication Module (Slot Filler)

The Honeywell FS-BLIND-IO is a non-functional placeholder/slot-filler module for Honeywell safety and control systems, providing mechanical fit and rack alignment without electrical activity.

FS-CCI-HSE-02

High-Speed Ethernet Cable Set

The Honeywell FS-CCI-HSE-02 is a 2.25 m shielded twisted-pair high-speed Ethernet cable set connecting USI-0002 modules to isolated Ethernet interfaces in Honeywell automation systems.

FS-CCI-HSE-30

Red Ethernet Cable (30 m)

The Honeywell FS-CCI-HSE-30 is a 30 m shielded twisted-pair red Ethernet cable for Honeywell Safety Manager networks, RJ45 connectors, up to 1 Gbps, 100 ohm impedance.

FS-CPB-0001

BackplaneHoneywell

Safety Manager Control Processor Backplane

Honeywell Safety Manager / Fail-Safe Controller (FSC) control processor backplane, part of the SIL3 FS-CPCHAS-0001 control processor chassis (now obsolete, superseded by FS-CPCHAS-0003).

FS-CPCHAS-0001

Chassis for Control Processor

The Honeywell FS-CPCHAS-0001 is a chassis for housing control processor modules in Honeywell Experion PKS distributed control systems, dimensions 280 x 482.6 x 177 mm.

FS-DCOM-232/485

Communication Interface Module (RS-232/RS-485)

The Honeywell FS-DCOM-232/485 is an RS-232/RS-485 communication interface module for Honeywell control systems.

FS-DO-1224

Digital Output ModuleHoneywell

Digital Output Module

The Honeywell FS-DO-1224 is a digital output module for Honeywell control systems.

FS-DO-1624

Digital Output ModuleHoneywell

Digital Output Module

The Honeywell FS-DO-1624 is a digital output module for Honeywell control systems.

FS-FANWR-24R

Cooling FanHoneywell

Fan Assembly Kit

The Honeywell FS-FANWR-24R is a fan assembly kit rated 24 VDC, 9.5 W (12-29 VDC range) for cooling in industrial control systems, dimensions 391 x 142 x 51 mm. CE, UL certified.

FS-GIMTLDO-824

Control BoardHoneywell

PCB Card

The Honeywell FS-GIMTLDO-824 is a printed circuit board interfacing with Honeywell measurement and control devices, weight approximately 280 g.

FS-IO-0001

Input/Output Extender Module

The Honeywell FS-IO-0001 is an I/O extender module for Honeywell safety and automation systems, with 16 channels supporting digital and analog signals (0-10V, 4-20mA), 24V DC, Modbus RTU. CE, UL, CSA, FM certified.

FS-IOB-0001R

Base I/O Module

The Honeywell FS-IOB-0001R is a base I/O module providing 8 inputs and 8 outputs at 12 VDC, RS485/Modbus RTU, IP65 rated, DIN rail mount.

FS-IOB-0001S

Base I/O Module

The Honeywell FS-IOB-0001S is a base I/O module for Honeywell automation systems.

FS-IOBUS-CPIO

I/O Bus Control Chassis

The Honeywell FS-IOBUS-CPIO is an I/O bus control chassis for the Honeywell TPS distributed control system, interfacing controller and I/O chassis. 24 V DC, 180 VA, 19-inch rack mountable.

FS-IOBUS-CPIOX

ControllerHoneywell

I/O Bus Controller

The Honeywell FS-IOBUS-CPIOX is an I/O bus controller for industrial automation systems, providing a high-speed bus interface for multiple I/O modules, compatible with Honeywell Experion process control systems.

FS-IOCHAS-0001R

I/O Chassis (Redundant)

The Honeywell FS-IOCHAS-0001R is a redundant I/O chassis providing housing and backplane connectivity for FSC Safety Manager I/O modules, supporting dual modules for fault tolerance. 24 VDC, 0 to +60 C.

FS-IOCHAS-0001S

Chassis for Non-Redundant I/O Module

The Honeywell FS-IOCHAS-0001S is a chassis for non-redundant I/O modules in Honeywell FSC Safety Manager systems.

FS-PDB-CPX05

Control BoardHoneywell

Power Distribution Board

The Honeywell FS-PDB-CPX05 is a compact power distribution board for centralized power management within controller cabinets, with integrated distribution and protection circuits. Dimensions 190 x 70 x 46 mm.

FS-PDB-IOX05

Control BoardHoneywell

Power Distribution Board Extension Module

The Honeywell FS-PDB-IOX05 is a power distribution board extension expanding low-voltage distribution in Honeywell control systems, with DIN-rail mounting and 4- and 8-position pin headers. Dimensions 170 x 70 x 46 mm. CE, UL, TUV, CSA approved.

FS-PDC-CPSET

Power Distribution Cable Set (Control Processor)

The Honeywell FS-PDC-CPSET is a 24 VDC power distribution cable set for control processors, including two cables (54 cm and 77 cm) connecting bus bar to SM controller. Cable type CC600, 2 x 2.5 mm. UL, CSA approved.

FS-PDC-FTA24P

Power Distribution Cable (PDB-0824 to FTA)

The Honeywell FS-PDC-FTA24P is a 24V, 2A power distribution cable connecting PDB-0824 to the FTA, 2 m length, 2 x 1.31 mm2 (AWG 16) tri-rated cable. UL, CSA approved.

FS-PDC-IOEP1A

Power Distribution Cable

The Honeywell FS-PDC-IOEP1A is a 24 VDC power distribution cable delivering power to I/O modules in Honeywell control systems, rated 110 mA, with EMI shielding.

FS-PDC-IOEP2A

Power Distribution Cable

The Honeywell FS-PDC-IOEP2A is a 24 VDC power distribution cable supplying I/O modules in Honeywell control systems, rated 110 mA, weight 200 g, with EMI shielding.

FS-PDC-IOEP3A

Power Distribution Cable

The Honeywell FS-PDC-IOEP3A is a 24 VDC power distribution cable for FSC Safety Manager systems, supplying I/O modules with shielded multi-core construction, 1 A continuous, -20 to +80 C. UL, CE certified.

FS-PDC-IOIP1A

Input/Output (I/O) Module

The Honeywell FS-PDC-IOIP1A is a modular input/output interface module for flexible analog and digital signal conditioning in industrial automation systems. Field-installable with EMI shielding for stable performance.

FS-PDC-IOR05

Rugged Power Distribution Cable

The Honeywell FS-PDC-IOR05 is a rugged power distribution cable for redundant I/O chassis configurations in Honeywell Safety Manager and DCS systems. Provides 5V/24V DC power delivery and watchdog signal synchronization between controllers; IEC 61508 functional safety rated.

FS-PDC-MB24-1P

Power Distribution Cable

The Honeywell FS-PDC-MB24-1P is a power distribution cable that transfers 24VDC power between control devices. 145 cm length with a Molex connector on one end and bare wires on the other; flame-retardant PVC insulation, RoHS compliant.

FS-PDC-MBMB-1

Power Distribution Cable

The Honeywell FS-PDC-MBMB-1 is a 3-meter power distribution cable rated 55 A at 24/48 VDC, using AWG 8 (HV8-55-c) conductors with a 2-pole jackscrew connector. UL and CSA approved; rated to 125 C.