Parts catalogue

Enhanced Communication Module

The Triconex 4118 is an enhanced communication module compliant with IEC 61508 SIL 3, supporting a wide range of analog and digital I/O modules, fast scan times and cybersecurity features.

4119

Enhanced Intelligent Communication Module

The Triconex 4119 is an Enhanced Intelligent Communication Module supporting RS-232/RS-422/RS-485 serial protocols, Modbus and TriStation. Equipped with 4 isolated serial ports and 1 isolated parallel port.

4119A

Enhanced Intelligent Communication Module

The Triconex 4119A is an Enhanced Intelligent Communication Module expanding the communication capabilities of Triconex safety controllers. Supports Modbus (master/slave), TriStation 1131 and printers; four configurable serial ports (RS-232/RS-422/RS-485) and one parallel port.

4200

Expansion ModuleTriconex

RXM Remote Extender Module

The Triconex 4200 RXM is a Remote Extender Module providing fault-tolerant communication between Triconex SIS, process control systems and other devices. Supports Modbus, Ethernet and PROFIBUS; extends system range with redundant links, data rates up to 100 Mbps.

Contact for wholesale

4200N

RXM Remote Extender Module

The Triconex 4200N is an RXM Remote Extender Module for Triconex safety and control systems.

4201

RXM Communication Module

The Triconex 4201 is an RXM (Remote Extender Module) communication module acting as a repeater/extender of the Tricon I/O bus with ground-loop isolation. Multi-mode fiber optic, cable length limit 1.2 miles (2 km), 6 ST modem ports, 18-30V DC input.

4201N

RXM Remote Extender Module

The Triconex 4201N is an RXM Remote Extender Module for Triconex safety and control systems.

4210

Remote Extender Module (Primary SRXM)

Triconex 4210 Primary single-mode fiber-optic remote extender module (SRXM) for Tricon safety systems. Supports up to 3 remote sites over single-mode fiber up to 12 km (7.5 miles) with ST fiber-optic connectors.

4211

Remote Extender Module (Remote RXM)

Triconex 4211 Remote single-mode fiber-optic remote extender module (RXM) for Tricon safety systems. Single-mode cable up to 12 km (7.5 miles) with fiber-optic ST connectors.

4305A

Enhanced Intelligent Communication Module (EICM)

Triconex 4305A Enhanced Intelligent Communication Module (EICM) for Tricon safety and control systems.

4315B

Tricon Communication Module

Triconex 4315B Tricon Ethernet communication module. Two 10/100 Mbps RJ45 Ethernet ports supporting Modbus TCP/IP, OPC and DNP3, with triple-module-redundant architecture and 24V DC supply.

4329

TMR Network Communication Module

Triconex 4329 Triple Modular Redundant (TMR) network communication module for Tricon safety systems, providing fault-tolerant operation and advanced diagnostics.

4329G

Network Communication Module (NCM)

Triconex 4329G Network Communication Module (NCM) providing Ethernet (802.3) connectivity for Triconex TMR systems. Dual-redundant module supporting Triconex proprietary protocols and TSAA.

4351A

Tricon Communication Module (TCM)

Triconex 4351A Tricon Communication Module (TCM). 4 serial ports and 2 network ports, 500 VDC port isolation, supporting TriStation, Modbus, TCP/IP and TSAA protocols with 10/100 Mbps copper Ethernet.

4351B

Tricon Communication Module (TCM)

Triconex 4351B Tricon Communication Module (TCM). 4 RS-232/RS-485 serial ports with DB-9 connectors, 2 10/100BaseT Ethernet ports with RJ-45 connectors, 500 VDC isolation.

4352AN

Tricon Communication Module (TCM)

Triconex 4352AN high-integrity communication interface module for Tricon safety systems. Supports RS-232, RS-485 and fiber-optic interfaces with 4 independent serial ports; IEC 61508 SIL 3 certified.

4352B

Tricon Communication Module (TCM)

Triconex 4352B Tricon Communication Module (TCM). 2 10/100BaseT RJ-45 Ethernet ports and 2 fiber-optic MT-RJ Ethernet ports (62.5/125 um), with copper and fiber Ethernet support.

4353

Tricon Communication Module (TCM)

Triconex 4353 Tricon Communication Module (TCM). 4 RS-232/RS-485 serial ports with DB-9 connectors, 2 10/100BaseT RJ-45 Ethernet ports, 500 VDC isolation, supporting TriStation and Modbus protocols.

4354

Tricon Communication Module (TCM)

Triconex 4354 Tricon Communication Module (TCM) with fiber-optic Ethernet for Tricon safety and control systems.

4400

Communication Module

Recognized manufacturer reference available for industrial supply enquiry.

4507

Interface ModuleTriconex

Interface Module

Recognized manufacturer reference available for industrial supply enquiry.

4609

Advanced Communication Module (ACM)

Triconex 4609 Advanced Communication Module (ACM) interfacing a Tricon controller to a Foxboro I/A Series system. Acts as a safety node on the I/A Series Nodebus for high-speed data transmission and real-time diagnostics.

7400061-210

Field Termination AssemblyTriconex

2750-2 AI/TC Termination Panel

Triconex 7400061-210 termination panel for 2750-2 Analog Input/Thermocouple (AI/TC) modules. Provides secure signal termination, shielding and per-channel fault isolation for up to 32 analog input channels.

7400145-200

EICM2 Ethernet Interface Communication Module

Triconex EICM2 (7400145-200) Ethernet Interface Communication Module connecting Triconex process control systems to Ethernet networks. Fault-tolerant with configurable redundancy.

7400165-380

Terminal Board

Triconex 7400165-380 terminal board for Tricon systems. 30 VDC rating, 10 A max current, 121 screw terminals, operating range -20°C to +70°C.

7400165-510

Termination Board

Triconex 7400165-510 termination board for Tricon systems. 60 VDC rating, 1.2 A max current, screw terminals, operating range -5°C to +45°C.

7400166-390

Termination Board

Triconex 7400166-390 termination board for Tricon safety and control systems, providing a secure interface for field wiring with screw terminals or ribbon-cable headers.

7400169-310

Digital Output ModuleTriconex

Digital Output Module

Triconex 7400169-310 digital output module assembly for Tricon safety systems.

7400169-310-9962

Digital Output ModuleTriconex

Digital Output Module

Triconex 7400169-310 (9962) digital output module assembly for Tricon safety systems.

7400195-210

Terminal Board

Triconex 7400195-210 terminal board for Tricon safety and control systems, providing a reliable interface for field wiring with screw terminals or ribbon-cable headers.

7400206-100

CM2201 Communication Module Baseplate

Triconex 7400206-100 communication module baseplate, associated with the CM2201 communication module for Tricon safety systems.

7400207-001

MP2101 Main Processor Baseplate

Triconex 7400207-001 main processor baseplate, associated with the MP2101 main processor for Tricon safety systems.

7400208B-020

Digital Input Baseplate

Triconex 7400208B-020 digital input baseplate for Tricon safety systems.

7400208C-020

DI2301 Digital Input Baseplate

Triconex 7400208C-020 digital input baseplate, associated with the DI2301 digital input module for Tricon safety systems.

7400209-010

AO2481 Analog Output Baseplate

Triconex 7400209-010 analog output baseplate, associated with the AO2481 analog output module for Tricon safety systems.

7400209-030

DO2401 Digital Output Baseplate

Triconex 7400209-030 digital output baseplate, associated with the DO2401 digital output module for Tricon safety systems.

7400210-010

AI2351 Analog Input Baseplate

Triconex 7400210-010 analog input baseplate, associated with the AI2351 analog input module for Tricon safety systems.

7400213-100

Processor ModuleTriconex

Digital Signal Hardware Execution Unit (DSHEU)

Triconex 7400213-100 Digital Signal Hardware Execution Unit (DSHEU). 24 VDC input, 100 mA, 0-24 VDC output, 2,000 VRMS isolation, dimensions 97 x 36 x 70 mm.

8100

Main Chassis (8-Slot)

Triconex 8100 main frame chassis (8-slot) for Tricon safety systems.

8101

Expansion Chassis

Triconex 8101 expansion chassis for Tricon safety systems.

8105

I/O ModuleTriconex

I/O Panel

Triconex 8105 I/O panel for Tricon safety and control systems.

8110

High Density Main Chassis

Triconex 8110 high-density main chassis for safety instrumented systems. Six RS-485 I/O expansion bus ports, channel A/B/C port sets, and a four-position keyswitch.

8110N2

Main Chassis Assembly (Tricon V10)

Triconex 8110N2 high-integrity main chassis assembly for the Tricon V10 fault-tolerant control system. Supports TMR architecture, redundant power, hot-swappable modules and expansion up to 14 additional chassis; IEC 61508 SIL 3 certified.

8111