Parts catalogue

High-Density Analog I/O Module

The Woodward 5466-315 is a 4-channel high-density analog I/O module supporting Triple Modular Redundancy (TMR). Input/output voltage range 18-30V DC, isolation 1500V RMS field-to-logic, load current max 200mA per channel. UL, CE and ATEX compliant.

5466-316

Analog I/O ModuleWoodward

Analog Combo Module

The Woodward 5466-316 is an analog combo module for Woodward control platforms, integrating configurable analog inputs (voltage/current) and analog outputs for actuator or process control. Rack or panel mountable with diagnostic LEDs.

5466-318

MicroNet TMR Kernel Power Supply Module

The Woodward 5466-318 is a kernel power supply within the MicroNet TMR Digital Control Series, requiring pairing with the TMR040 CPU module. It regulates incoming power to 5 VDC at up to 10 A. Rated for Class I Division 2 non-hazardous locations; CE and CSA certified.

5466-328

Analog I/O ModuleWoodward

Analog Combo Module

The Woodward 5466-328 is a high-performance analog combo module for industrial control systems supporting multi-channel signal processing. Hot-pluggable, with Modbus and Profibus communication, IP20 protection, 240V input.

Contact for wholesale

5466-330

High-Density Analog I/O Module

The Woodward 5466-330 is a high-density analog I/O module with high-resolution digital-to-analog conversion for industrial control. Readback accuracy 0.5% of 0-25 mA full scale, chassis mounting with card guides, supports PLC and DCS integration.

5466-332

Analog I/O Module

The Woodward 5466-332 is an analog I/O module for industrial control systems, managing analog signal input and output with Woodward control platforms. Multiple configurable analog inputs/outputs (typically 4-8), 12-bit or higher conversion, 24V DC nominal.

5466-3321

Analog I/O Module

Recognized manufacturer reference available for industrial supply enquiry.

5466-340

Digital Governor System

The Woodward 5466-340 is a digital governor system with 16 digital input channels and 8 digital output channels, supporting Ethernet and RS485 communication. Input voltage 24 VDC, 5A, hot-pluggable, with 16-bit input and 12-bit output resolution.

5466-348

NetCon SIO Module

The Woodward 5466-348 is a NetCon serial input/output (SIO) module that interfaces with digital actuator drivers. It has three RS-485 ports supporting EM or GS/LQ digital actuator drivers, each handling one driver per 5 ms update cycle at 417 kbaud.

5466-3484

NetCon SIO Module

Recognized manufacturer reference available for industrial supply enquiry.

5466-352

PLC CPU ModuleWoodward

NetCon CPU-040 Module

The Woodward 5466-352 is a NetCon CPU-040 module serving as the central processing unit within the MicroNet system. Supply voltage 10-32 VDC, 4 analog inputs and 2 analog outputs (12-bit), 8 digital I/O, supports Modbus RTU and CANopen.

5466-3523

PLC CPU ModuleWoodward

NetCon CPU-040 Module

Recognized manufacturer reference available for industrial supply enquiry.

5466-353

SFP TransceiverWoodward

NetCon Main Chassis Transceiver Module

The Woodward 5466-353 is a NetCon main chassis transceiver module enabling high-speed data transmission across the control network. Input voltage 24 VDC, operating temperature -40 to +85 degrees C, signal input impedance 33K Ohms.

5466-355

SFP TransceiverWoodward

Remote Chassis Transceiver

The Woodward 5466-355 is a remote chassis transceiver designed for CPU 68040 systems. It facilitates exchange of control, data and address information between the Main XCVR module and other system components.

5466-3553

Operator TerminalWoodward

Digital Control Operator Interface

Recognized manufacturer reference available for industrial supply enquiry.

5466-425

Analog I/O Module

The Woodward 5466-425 is an analog I/O module managing high-density analog signals including voltage, current, temperature and pressure inputs. 24 channels, input range 0-25 mA, update time 5 ms, with amplification and filtering signal conditioning.

5466-5026

High-Density Analog I/O Module

The Woodward 5466-5026 is a simplex high-density analog I/O module. Input 0-25 mA or 0-5 V, mounts in the chassis card guide connecting through two high-density cables to up to two field transition modules (FTMs). Max altitude 4000 m.

5500-577

MicroNet Module

Recognized manufacturer reference available for industrial supply enquiry.

5500159D

RelayWoodward

Relay Control Board

Recognized manufacturer reference available for industrial supply enquiry.

5501-1432

2-Channel Actuator Control Module

Recognized manufacturer reference available for industrial supply enquiry.

5501-214

ControllerWoodward

Governor Digital Control Module

The Woodward 5501-214 is a governor digital module providing speed and load control for steam turbines and turbo-generators. Supply voltage 24-30 VDC, 4 analog inputs, 2 analog outputs, 8 digital I/O, supports Modbus RTU and CANopen.

5501-365

Analog I/O ModuleWoodward

Analog Combo I/O Module

Woodward 5009 / MicroNet Plus governor MPU and analog combo input/output module used in turbine speed and load control. The stored 'electro-hydraulic converter' description was incorrect.

5501-367

Field Termination AssemblyWoodward

MicroNet Simplex LV Discrete Field Termination Module

The Woodward 5501-367 is a MicroNet Simplex low-voltage discrete field termination module (FTM) for gas turbine control systems. Input voltage 18-32 VDC at 27.4 A, output 24 VDC at 16 A, network isolation 1000 Vrms, power consumption 14 W.

5501-371

MicroNet Simplex Interface Module

The Woodward 5501-371 is a MicroNet Simplex interface module used in gas turbine control systems for industrial automation. Dimensions 160 x 160 x 120 mm, weight 1.82 kg, made in USA.

5501-372

Digital Governor Control

The Woodward 5501-372 is a digital governor control regulating speed and load of industrial engines and turbines for power generation, marine propulsion and industrial automation. 24V DC, speed range 500-10,000 RPM, magnetic pickup input, RS-485/CAN bus.

5501-376

High-Density Analog I/O Module

The Woodward 5501-376 is a high-density analog I/O module providing 4 speed sensor inputs, 8 analog inputs (4-20 mA or 0-5 V), 4 analog outputs and 2 proportional actuator driver outputs (4-20 mA or 20-160 mA).

5501-380

TMR Power Supply

The Woodward 5501-380 is a Triple Modular Redundant (TMR) power supply providing high reliability and fault tolerance for mission-critical applications. The chassis features redundant power supply capability for continuous power delivery even on power module failure.

5501-381

TMR Power Supply Unit

The Woodward 5501-381 is a Triple Modular Redundant (TMR) power supply unit in the MicroNet Digital Control series. Operates at 220 VAC with max input power 1250 VA, includes a 10 A time-delay input breaker/power fuse, and is hot-swappable.

5501-429

Valve ActuatorWoodward

NetCon 2-Channel Actuator Controller Module

The Woodward 5501-429 is a NetCon 2-channel actuator controller module. Each channel manages proportional or integrating pneumatic or hydromechanical actuators, accommodates one or two position feedback devices, and includes alarms for excitation, feedback and drivers.

5501-432

Actuator Control Module

The Woodward 5501-432 is an actuator control module managing two independent actuator channels with a 200 mA current rating, supporting 1 or 2 feedback devices for precise actuator positioning.

5501-466

Simplex Power Supply

The Woodward 5501-466 is a simplex power supply for industrial applications with four LED indicators displaying real-time health and status. Operating voltage range 18 to 36 VDC.

5501-467

High Voltage AC/DC Power Supply

The Woodward 5501-467 is a high-voltage AC/DC simplex power supply for MicroNet Plus or MicroNet Simplex chassis. Operating range 180-264 VAC (47-63 Hz), output 5 VDC up to 32 A at 55 degrees C, max altitude 4000 m.

5501-469

ControllerWoodward

505 Digital Microprocessor Controller

The Woodward 5501-469 is part of the Woodward 505 control system, a microprocessor-based controller for turbocompressor speed control. It features programming and operating modes and supports the NETCON CPU_040 communication interface.

5501-470

Memory ModuleWoodward

Non-Volatile Memory Module

The Woodward 5501-470 is a non-volatile memory module for Woodward MicroNet and MicroNet Plus digital control systems. Capacity 470 KB, VMEbus interface, single/dual/triple-board configuration, operating temperature -40 to +85 degrees C.

5501-471

NetCon SIO Module

The Woodward 5501-471 is a NetCon serial input/output (SIO) module facilitating communication between the control system and turbine devices and sensors. Ports 1-2 are RS-232; ports 3-4 support RS-232, RS-422 and RS-485. Input 24 VDC, NEMA 4X enclosure.

5503-198

MicroNet Remote I/O Module

The Woodward 5503-198 is a field termination module connecting discrete inputs and outputs to a Woodward control system. 8 discrete inputs, 8 discrete outputs, isolated to prevent ground loops, DIN rail mounted.

5503-279

Analog Input ModuleWoodward

High Density Versatile Input Module

The Woodward 5503-279 is a high-density versatile input module (HDVIM) handling 34 analog inputs plus two cold junction inputs, configurable as 4-20 mA, thermocouple or RTD inputs.

62223-5500-159-D, 3074-739 PCB

Relay Output ModuleWoodward

Relay Board Module

Woodward relay board PCB module providing relay outputs for turbine sequencing/control interface. Assembly carries Woodward part 5500-159-D with sub-reference 3074-739.

701A-8280-192

Speed Monitor ModuleWoodward

Digital Speed Control

Recognized manufacturer reference available for industrial supply enquiry.

8100D14001-520P514-01

Field CommunicatorWoodward

FST Field Service Tool Unit

Woodward FST (field service tool) assembly, part 8100D14001 rev1 with sub-number 520P514-01, used for servicing Woodward fuel/control systems.

8200-1205

Digital Output ModuleWoodward

Digital Output Module

The Woodward 8200-1205 is a digital output module for industrial automation providing 12 solid-state relays rated 240 VAC/DC at 2 A max. Power supply 18-32 VDC, output signal isolation 1500 Vrms, CE and UL certified.

8200-1300

505 Digital Governor

The Woodward 8200-1300 is a digital governor in the 505 turbine control series for precise control of steam turbines. It includes five PID controllers, an 8.4-inch screen with 34 keys, operates on 18-32 Vdc, and can run standalone or within a plant DCS.

8200-1301

505D Digital Governor Turbine Control

The Woodward 8200-1301 is a 505D digital governor turbine control module for steam turbine systems with single or split-range actuators. Power supply 88-132 Vac / 90-150 Vdc, power consumption under 73 W, 8.5-inch graphical HMI at 800x600.

8200-1302

Digital Governor System

The Woodward 8200-1302 is a digital governor system for steam turbines. Analog input 4-20 mA with loop power, input voltage 18-36 VDC isolated, IP-54 ingress protection, ATEX certified, EN 61000-6-2 EMC immunity.

8200-1311

Digital Governor

The Woodward 8200-1311 is a digital engine/turbine governor with an integrated graphical HMI front panel. High-voltage power input 88-264 Vac or 90-150 Vdc, analog and digital I/O, Class 1 Div 2 rated, suited for industrial turbines and marine engines.

8200-1312

Digital Governor Turbine Control System

The Woodward 8200-1312 is a digital governor turbine control system with integrated graphical HMI (multilingual), Ethernet and CANOpen communication. 18-36 Vdc low-voltage input, CE/UL/Marine/ATEX Zone 2 certified, made in USA.

8200-177

Drive Control BoardWoodward

EM and LQ Digital Driver

The Woodward 8200-177 is an EM and LQ digital driver for prime mover control applications. Used with the EM/LQ actuator/valve system for all-electric actuation of variable geometry steam, gas, water and flow control valves. Input 120 VAC, output 24 VDC at 16 A.

8200-188

505 Series Control Module

Recognized manufacturer reference available for industrial supply enquiry.