Parts catalogue

Communication Module

Yokogawa VI451-10 communication module with IP54 protection and 100-120 VAC input power supply.

VI451-11

Communication Module

Yokogawa VI451-11 communication interface module for CENTUM VP and CENTUM CS distributed control systems, providing the Vnet/IP system bus connection. 24 VDC, supports dual-redundant configurations, operating range -20 to +60 C.

VI701

Control Bus Interface Card

Yokogawa VI701 control bus interface card. 1000Base-T (CAT5e, RJ45) Gigabit full-duplex communication, PCI 3.0 bus (32-bit/33 MHz), 5 V supply, up to 100 m distance to a Layer 2 switch.

VI701-FCS

Network Interface Card

Yokogawa VI701-FCS network interface card for FCS field control stations.

Contact for wholesale

VI701-S1

Network Interface Card

Yokogawa VI701 (style S1) network interface card.

VI702

Vnet/IP Interface Card

Yokogawa VI702 Vnet/IP interface card, a replacement for the V1701 Vnet/IP card. 3.3 V supply, max 2.5 A consumption, with RDY, RCV and SND indicator lamps and an Ethernet connector.

VI702-S1

Vnet/IP Interface Card

Yokogawa VI702 (style S1) Vnet/IP interface card.

VM1*S

Analog Input ModuleYokogawa

Multipoint Input Module

Yokogawa VM1*S multipoint input module supporting up to 16 analog input channels for data acquisition and monitoring in process control systems.

VM1D-I-O

I/O Card

Yokogawa VM1D I/O card for the CENTUM control system.

VM1D-S9210AQ-03

Analog I/O ModuleYokogawa

Analog I/O Module

Yokogawa VM1*D is an analog I/O module for the CENTUM VP distributed control system, handling multi-channel analog input signals (current/voltage) for process variables. The -S9210AQ-03 suffix denotes the assembly variant.

VP6CCM-C11

I/O ModuleYokogawa

Enhanced I/O Module

Yokogawa VP6CCM-C11 enhanced I/O module for the CENTUM VP distributed control system (OpreX family). 32 I/O points supporting analog, digital and serial signals; 24 VDC, IP66, operating range -40 to 70 C.

YCB111-M025

CableYokogawa

Coaxial Cable

Yokogawa YCB111-M025 25-meter coaxial cable for V net (10BASE-5) communication networks in CENTUM VP and ProSafe-RS control systems. N-type or solderless-lug connectors; minimum bend radius 100 mm.

YCB118

V-Net Terminator

Yokogawa YCB118 is a V-net bus terminator (for 10BASE-5 cable) used at the ends of the V-net control bus in CENTUM distributed control systems.

YCB141-M002

CableYokogawa

Vnet Cable

Yokogawa YCB141-M002 2-meter Vnet coaxial communication cable (10BASE-2) for CENTUM series distributed control systems. BNC connectors, outer diameter approx 14.5 mm, minimum bend radius 50 mm.

YCB141-M005

CableYokogawa

Vnet Cable

Yokogawa YCB141-M005 5-meter V net (10BASE-2 coaxial) communication cable for CENTUM VP, CS 3000 and CS 1000 systems. BNC connectors, outer diameter 14.5 mm, minimum bend radius 50 mm.

YCB141-M010

CableYokogawa

Vnet Cable

Yokogawa YCB141-M010 10-meter Vnet (10BASE-2) communication cable for Yokogawa DCS and automation systems.

YCB141-M015

CableYokogawa

Vnet Cable

Yokogawa YCB141-M015 15-meter V net communication cable for CENTUM and ProSafe systems, factory-terminated for control-network interconnection.

YCB141-M020

CableYokogawa

Vnet Cable

Yokogawa YCB141-M020 20-meter V net communication cable (shielded twisted pair) for CENTUM CS 3000 and VP distributed control systems.

YCB141-M025

CableYokogawa

Coaxial Communication Cable

Yokogawa YCB141-M025 25-meter coaxial communication cable (10BASE-2) for V net and ER bus networks in CENTUM VP and ProSafe-RS control systems. Solderless-lug connectors with M4 screws, minimum bend radius 50 mm.

YCB141-M030

CableYokogawa

Vnet Cable

Yokogawa YCB141-M030 30-meter V-net (shielded) communication cable for connecting V-net nodes in CENTUM VP DCS networks.

YCB141-M035

CableYokogawa

Coaxial Bus Cable

Yokogawa YCB141-M035 35-meter coaxial bus cable (10BASE-2) for V net or ER bus communication networks in CENTUM VP and ProSafe-RS control systems. Solderless-lug connectors with M4 screws, minimum bend radius 50 mm.

YCB141-M050

CableYokogawa

Vnet Cable

Yokogawa YCB141-M050 50-meter V net communication cable (shielded twisted pair) for CENTUM CS 3000 and VP distributed control systems.

YCB146-T

ConnectorYokogawa

T-Shaped Control Bus Connector

Yokogawa YCB146-T T-type control bus connector used with VF702 control bus interface cards for coaxial V net connections.

YCB147-2

Protocol GatewayYokogawa

Control Bus Cable Adapter

Yokogawa YCB147-2 control bus cable adapter for ER bus systems in Yokogawa distributed control and automation platforms.

YCB147-4/BR

Protocol GatewayYokogawa

ER Bus Converter Adapter

Yokogawa YCB147-4/BR ER bus converter adapter for CENTUM VP control networks, interfacing V net, ER bus, ESB bus and RIO bus architectures. 4-connector (non-explosion-proof) type, 10BASE-2/10BASE-5 interface, supports KS1-01B 40-pin signal cables.

YCB147-5

Protocol GatewayYokogawa

Control Bus Cable Conversion Adapter

Yokogawa YCB147-5 control bus cable conversion adapter for ER bus systems, supporting legacy 10BASE-2 and 10BASE-5 Ethernet standards in Yokogawa DCS architectures. Non-explosion-proof 2-connector configuration with optional 19-inch rack mount.

YCB148

V Net Terminator

Yokogawa YCB148 V net terminator module for CENTUM CS 3000 and VP distributed control systems, providing proper line termination for the V net communication bus.

YCB148-FCS

V Net Terminator

Yokogawa YCB148-FCS V net terminator module for FCS field control stations.

YCB301

CableYokogawa

ESB Bus Cable

Yokogawa YCB301 is an ESB (Enhanced Serial Bus) communication cable connecting controllers and I/O modules in CENTUM VP / FIO distributed control systems. Length variants carry a -Cxxx suffix (e.g. -C100 = 1 m).

YCB301-C020

CableYokogawa

ESB Bus Cable

Yokogawa YCB301-C020 36-pin (male-to-male) ESB bus cable, 20 cm length, for ESB bus communication in Yokogawa automation systems.

YCB301-C100

CableYokogawa

ESB Bus Cable

Yokogawa YCB301-C100 1-meter ESB bus cable connecting Field Control Units (FCUs) and Advanced Network Bus (ANB) node units within the CENTUM VP network.

YCB301-C200

CableYokogawa

ESB Bus Cable

Yokogawa YCB301-C200 2-meter 36-pin ESB bus cable for connecting components within the CENTUM VP network.

YCB301-C300

CableYokogawa

ESB Bus Cable

Yokogawa YCB301-C300 3-meter ESB bus cable with 36-pin male connectors for CENTUM VP and CS 3000 distributed control systems. Cable diameter 6.5 mm, max 30 VDC.

YCB301-C400

CableYokogawa

ESB Bus Cable

Yokogawa YCB301-C400 4-meter ESB bus cable (36-pin to 36-pin) for Yokogawa CENTUM VP and other control platforms. High-grade copper conductor, 120 ohm impedance, operating range -10 to +60 C.

YCB301-C500

CableYokogawa

ESB Bus Cable

Yokogawa YCB301-C500 5-meter ESB bus cable (36-pin to 36-pin) for CENTUM VP distributed control systems, connecting Field Control Units (FCUs) and node devices. High-grade copper conductor, max current 0.2 A.

YCB301-C600

CableYokogawa

ESB Bus Cable

Yokogawa YCB301-C600 ESB bus cable, 600 mm length, shielded twisted pair with 9-pin D-sub connectors for industrial control systems.

YHC4150X

HART Communicator

Yokogawa YHC4150X handheld HART communicator.

YHC4150X-01

Portable HART Communicator

Yokogawa YHC4150X-01 handheld HART communicator for commissioning, configuration and maintenance of HART field devices.

YHC5150X

Portable HART Communicator

Yokogawa YHC5150X handheld HART communicator for commissioning, configuration and maintenance of HART field devices, supporting HART 6 and 7. 4.3-inch anti-glare color touchscreen, 1 GHz processor, 512 MB flash / 256 MB RAM, full QWERTY keyboard.

YHC5150X-FCS

Portable HART Communicator

Yokogawa YHC5150X-FCS handheld HART communicator for HART field device configuration and maintenance.

YNT511D

Optical Bus Repeater Rack

Yokogawa YNT511D is an optical bus repeater rack for CENTUM CS 3000 / VP distributed control systems, extending the control bus over optical fiber up to 4 km between a pair of repeaters. Orderable rack variants carry a -P/-R/-V suffix.

YNT511D-P42

Chassis / RackYokogawa

Optical Bus Repeater Rack

Yokogawa YNT511D-P42 optical bus repeater rack (without cards) for CENTUM VP and CENTUM CS distributed control systems, extending communication distances up to 1000 m at up to 10 Mbps.

YNT511D-P42/KT

Optical Bus Repeater Module

Yokogawa YNT511D-P42/KT optical bus repeater module for CENTUM VP and CENTUM CS distributed control systems, extending optical ESB bus networks. 24 VDC, max 60 mA, 1 kV DC isolation, supports up to 13 repeater modules.

YNT511D-V42

Chassis / RackYokogawa

Optical Bus Repeater Rack

Yokogawa YNT511D-V42 optical bus repeater rack for V net-based control systems such as CENTUM VP, providing signal regeneration and retransmission to extend communication distances.

YNT512D-P11/KT

Ethernet Interface Module

Yokogawa YNT512D-P11/KT Ethernet interface module for the FA-M3 range-free controller, supporting IEEE 802.3 (10BASE-T, 100BASE-TX), TCP/IP and UDP/IP, with ASCII and binary data formats and event transmission up to 128 bytes.

YNT512D-Q12

V Net Bus Repeater Module

Yokogawa YNT512D-Q12 V Net bus repeater that amplifies and retransmits signals to extend reach within the Yokogawa V Net network; units can be cascaded in series for greater distances.

YNT512D-V12/KT

V Net Bus Repeater Module

Yokogawa YNT512D-V12/KT V Net bus repeater module that amplifies and retransmits V Net signals to extend network distance; units can be connected in series for scalability.

YS170-012

ControllerYokogawa

Single-Loop Programmable Controller

Yokogawa YS170-012 single-loop programmable controller for precise process control. 4-20 mA / 1-5 VDC input and output, 100-240 VAC supply, digital display, RS-485 communication.