Parts catalogue

24 VDC Input Module

GE Fanuc PACSystems RX3i 24 VDC input module. 32 points positive/negative logic, 2 ms on / 2 ms off, range 20-30 V (on >11.5 V), 300 mA @ 5 VDC backplane, panel/DIN rail.

IC694MDL655A

24 VDC Input Module

GE Fanuc PACSystems RX3i 24 VDC input module, hardware revision A.

IC694MDL655LT

24 VDC Input Module

GE Fanuc PACSystems RX3i 24 VDC input module, low-temperature (LT) variant.

IC694MDL660

DC Voltage Input Module

GE Fanuc PACSystems RX3i 24 VDC input module. 32 points positive/negative logic, selectable 0.5-100 ms filter, range 20-30 V (on >11.5 V), 300 mA @ 5 VDC, panel/DIN rail.

Contact for wholesale

IC694MDL730

DC Positive Logic Output Module

GE Fanuc PACSystems RX3i 12/24 VDC positive-logic output module. 8 outputs in one group, range 12-24 VDC, two 5 A fuses, hot-swappable, 1500 VAC isolation.

IC694MDL732

DC Voltage Output Module

GE Fanuc PACSystems RX3i 12/24 VDC positive-logic output module. 8 points, 0.5 A per point / 2 A per common, individually isolated, no fuses required, optical isolation 250 VAC.

IC694MDL734A

DC Output Module

GE Fanuc PACSystems RX3i DC output module, hardware revision A.

IC694MDL740

DC Output Module

GE Fanuc PACSystems RX3i DC output module. 16 output points organised in two groups of 8, each group with its own common power output terminal.

IC694MDL740A

DC Output Module

GE Fanuc PACSystems RX3i DC output module, hardware revision A.

IC694MDL741

DC Output Module

GE Fanuc PACSystems RX3i 12/24 VDC negative-logic (sinking) output module. 16 channels in two groups of 8, range 12-24 VDC, 110 mA @ 5 VDC all-on.

IC694MDL742

Positive Logic ESCP Output Module

GE Fanuc PACSystems RX3i 16-point positive-logic output module with electronic short-circuit protection (ESCP). Rated 12/24 VDC, range 12-24 VDC, 1 A per point, two groups of 8, 130 mA @ 5 VDC.

IC694MDL752

DC Digital Output Module

GE Fanuc PACSystems RX3i 32-point DC output module. Negative logic (sinking) transistor outputs in four isolated groups of 8, TTL and 12/24 V modes, 4 A per group.

IC694MDL753

DC Voltage Output Module

GE Fanuc PACSystems RX3i 32-point DC voltage output module. Range 12-24 VDC, 0.5 ms on / 0.5 ms off response, 260 mA @ 5 VDC internal power.

IC694MDL754

DC Voltage Output Module

GE Fanuc PACSystems RX3i 32-point DC voltage output module. Galvanic isolation, panel or DIN rail mount; agency approvals UL/HAZLOC, ATEX Zone 2, marine (ABS/BV/DNV/GL/LR).

IC694MDL758

Digital Output ModuleGE

RX3i DC Voltage Output Module

GE PACSystems RX3i DC voltage output module providing 32 discrete outputs in two isolated groups of 16. Rated 12/24 VDC, output range 10.2 to 28.8 VDC, 0.5 A per point (8 A max per group), with electronic short-circuit protection. Requires terminal block IC694TBx032.

IC694MDL916

Relay Output Module

GE Fanuc PACSystems RX3i 16-point relay output module. Individually isolated Form A (N.O.) contacts, 0-125 VDC / 5-250 VAC, up to 4 A per output, hot-swappable.

IC694MDL930

Isolated Relay Output Module

GE Fanuc PACSystems RX3i 8-point isolated relay output module. Individually isolated Form A (N.O.) contacts, AC/DC up to 250 VAC, 24 VDC rated, 5 A inrush, hot-swappable.

IC694MDL930A

Isolated Relay Output Module

GE Fanuc PACSystems RX3i 8-point isolated relay output module, hardware revision A.

IC694MDL930C

Isolated Relay Output Module

GE Fanuc PACSystems RX3i 8-point isolated relay output module, hardware revision C.

IC694MDL940

AC/DC Voltage Output Module

GE Fanuc PACSystems RX3i AC/DC voltage output module. Galvanic isolation, panel or DIN rail mount; agency approvals UL/HAZLOC, ATEX Zone 2, marine (ABS/BV/DNV/GL/LR).

IC694MDL940C

AC/DC Voltage Output Module

GE Fanuc PACSystems RX3i AC/DC voltage output module, hardware revision C.

IC694MDL940F

AC/DC Voltage Output Module

GE Fanuc PACSystems RX3i AC/DC voltage output module, hardware revision F.

IC694MDL940LT

AC/DC Voltage Output Module

GE Fanuc PACSystems RX3i AC/DC voltage output module, low-temperature (LT) variant.

IC694MDR390

I/O ModuleGE Fanuc

Mixed I/O Module

GE Fanuc PACSystems RX3i mixed I/O module. 8 discrete DC inputs (sinking/sourcing) and 8 relay outputs, 24 VDC nominal input, 2 A per output, galvanic isolation.

IC694PSM001

Power MeterGE Fanuc

Power Sync and Measurement Module

GE Fanuc PACSystems RX3i Power Sync and Measurement (PSM) module.

IC694PWR321

Power Supply Module

GE Fanuc PACSystems RX3i power supply module.

IC694PWR321

Power SupplyGE

RX3i Expansion Power Supply

GE PACSystems RX3i expansion power supply module for remote bases. Input 100-240 VAC / 125 VDC, total output 30 W (5 VDC 15 W, 24 VDC relay 15 W, 24 VDC isolated 20 W), 0.8 A output current capacity.

IC694PWR330B

Power Supply Module

GE Fanuc PACSystems RX3i power supply module, hardware revision B.

IC694PWR331

Remote Base Power Supply

GE Fanuc PACSystems RX3i expansion/remote-base power supply. 24 VDC input, 30 W total output (30 W @ 5 V, 15 W @ 24 V relay, 20 W @ 24 V isolated), 0.8 A at 24 VDC.

IC694PWR331D

Remote Base Power Supply

GE Fanuc PACSystems RX3i expansion/remote-base power supply, hardware revision D.

IC694TBB032

Terminal BlockGE Fanuc

High-Density Terminal Block

GE Fanuc PACSystems RX3i high-density box-style terminal block, 36 pins, for high-density RX3i and Series 90-30 modules.

IC694TBB032E

Terminal BlockGE Fanuc

High-Density Terminal Block

GE Fanuc PACSystems RX3i high-density box-style terminal block, hardware revision E.

IC694TBB132

Terminal BlockGE Fanuc

High-Density Terminal Block

GE Fanuc PACSystems RX3i high-density terminal block.

IC695ACC302

Battery / Accessory Module

GE Fanuc PACSystems RX3i battery / accessory module.

IC695ACC302AB

Battery Module

GE Fanuc PACSystems RX3i battery module.

IC695ACC400

RX3i Energy Pack

GE Fanuc PACSystems RX3i Energy Pack. Provides backup power to preserve user memory; operating temperature 0-60 C, approx. 140 x 124 x 25.4 mm, 0.7 kg.

IC695ACC403

Rackless Energy Pack Module

GE Fanuc PACSystems RX3i rackless Energy Pack module. Backs up CPE400 and CPL410 CPU memory; 24 V DC +/-10% input, 72 W output, replaceable IC695ACC413 cap pack, IC695CBL003 cable.

IC695ACC412

Replacement Cap Pack Module

GE Fanuc PACSystems RX3i replacement capacitor (cap) pack module for the Energy Pack. Compatible with IC695CPE330 CPU, ~5 year life, mounts at bottom of Energy Pack.

IC695ALG106

Isolated Analog Input Module

GE Fanuc PACSystems RX3i 6-channel isolated analog input module. Voltage and current ranges (0-20 mA, 4-20 mA, +/-10 V), per-channel alarms, software-configurable, hot-swappable.

IC695ALG112

PACSystems RX3i Isolated Analog Input Module

The GE IC695ALG112 is a 12-channel isolated analog input module from the PACSystems RX3i series. It supports voltage and current signals (0-20 mA, 4-20 mA, +/-20 mA; +/-10 V, 0-10 V) with 16-bit resolution and configurable filtering.

IC695ALG508

RTD Input ModuleGE Fanuc

PACSystems RX3i Isolated RTD Input Module

The GE IC695ALG508 is an isolated RTD input module for the PACSystems RX3i series. DIN-rail/panel mount with hot-swap capability; UL, UL HAZLOC, Zone 2/ATEX C1D2 and marine (ABS, BV, DNV, GL, KRS, LR) approvals.

IC695ALG600

PACSystems RX3i Universal Analog Input Module

The IC695ALG600 provides eight general-purpose analog input channels (two groups of four) configurable for voltage, current, thermocouple, RTD and resistance inputs. Power dissipation 5.4 W max.

IC695ALG608

PACSystems RX3i Analog Input Module

The GE IC695ALG608 is an 8/4-channel voltage/current analog input module for the PACSystems RX3i. Current ranges 0-20 mA, 4-20 mA, +/-20 mA; voltage +/-10V, 0-10V, +/-5V, 0-5V, 1-5V. 24-bit ADC, 4.83 W max dissipation.

IC695ALG608EA

PACSystems RX3i Analog Input Module

GE Fanuc IC695ALG608EA PACSystems RX3i analog input module (8/4-channel voltage/current). EA is a hardware revision of the ALG608.

IC695ALG616

PACSystems RX3i Analog Input Module

The GE Fanuc IC695ALG616 is a PACSystems RX3i analog input module with 16 single-ended or 8 differential channels. Input ranges +/-10V, 0-10V, +/-5V, 0-5V, 1-5V, 0-20mA and 4-20mA. DIN-rail/panel mount.

IC695ALG616CA

PACSystems RX3i Analog Input Module

GE Fanuc IC695ALG616CA PACSystems RX3i analog input module (16 single-ended / 8 differential channels). CA is a hardware revision of the ALG616.

IC695ALG626

PACSystems RX3i Analog Input Module

The GE Fanuc IC695ALG626 is a high-speed PACSystems RX3i analog input module supporting multiple voltage and current ranges, hot-swap and DIN-rail/panel mount. UL, UL HAZLOC and marine approvals.

IC695ALG628

PACSystems RX3i Analog Input Module

The GE IC695ALG628 is an 8-channel (8 single-ended / 4 differential) analog input module for the PACSystems RX3i with integrated HART 5.0 on each channel. 24-bit ADC; voltage +/-10V..1-5V and current 0-20/4-20/+/-20 mA.