Parts catalogue

PACSystems RX3i Analog Output Module

The IC695ALG704 provides four configurable analog output channels (voltage +/-10 VDC, 0-10 VDC; current 0-20 mA, 4-20 mA) with up to 16-bit resolution. Requires external 24 VDC supply.

IC695ALG708

PACSystems RX3i Analog Output Module

The GE Fanuc IC695ALG708 is a PACSystems RX3i analog output module. DIN-rail/panel mount, hot-swap, multiple voltage ranges and current capacities. UL, UL HAZLOC, Zone 2/ATEX and marine approvals.

IC695ALG708CB

PACSystems RX3i Analog Output Module

GE Fanuc IC695ALG708CB PACSystems RX3i analog output module. CB is a hardware revision of the ALG708.

IC695ALG728

PACSystems RX3i Analog Output Module

The GE IC695ALG728 is an 8-channel non-isolated analog output module for the PACSystems RX3i with HART 5.0. Voltage +/-10 VDC, 0-10 VDC; current 0-20 mA, 4-20 mA. Field-to-backplane isolation 2550 VDC.

Contact for wholesale

IC695CBL001

CableGE Fanuc

PACSystems RX3i Expansion Cable

The GE IC695CBL001 is a shielded expansion/control cable for PACSystems RX3i modules, providing communication and data transfer between modules and expansion racks. Typical length 1 meter.

IC695CBL002

CableGE Fanuc

PACSystems RX3i Replacement Cable

The GE Fanuc IC695CBL002 is a PACSystems RX3i replacement cable for CPU connection. 1 meter (36 in), 7-pin keyed connector, straight-through wiring, termination resistor, RoHS compliant. Operating temperature 0-60 C.

IC695CHS007

PACSystems RX3i 7-Slot Universal Backplane

The IC695CHS007 is a 7-slot universal backplane supporting both PCI-based (IC695) and serial (IC693/IC694) modules. Slot 0 dedicated to the IC695 power supply; suitable for Class I, Division 2 hazardous areas.

IC695CHS007LT

PACSystems RX3i 7-Slot Universal Backplane

GE Fanuc IC695CHS007LT PACSystems RX3i 7-slot universal backplane (LT variant).

IC695CHS012

PACSystems RX3i 12-Slot High-Speed Controller Base

The GE Fanuc IC695CHS012 is a PACSystems RX3i 12-slot universal controller and I/O base supporting PCI and high-speed serial bus, with hot-swap support. Dimensions 457.5 x 141.5 x 147.32 mm.

IC695CHS012BA

PACSystems RX3i 12-Slot Universal Base

GE Fanuc IC695CHS012BA PACSystems RX3i 12-slot universal base. BA is a hardware revision of the CHS012.

IC695CHS012CA

PACSystems RX3i 12-Slot Universal Backplane

GE Fanuc IC695CHS012CA PACSystems RX3i 12-slot universal backplane. CA is a hardware revision of the CHS012.

IC695CHS016

PACSystems RX3i 16-Slot Universal Backplane

The IC695CHS016 is a PACSystems RX3i 16-slot universal controller and I/O backplane supporting PCI and high-speed serial bus. Internal power 240 mA @ 5 VDC, 600 mA @ 3.3 VDC.

IC695CHS016CA

PACSystems RX3i 16-Slot Universal Backplane

GE Fanuc IC695CHS016CA PACSystems RX3i 16-slot universal backplane. CA is a hardware revision of the CHS016.

IC695CHS016G

PACSystems RX3i 16-Slot Universal Backplane

GE Fanuc IC695CHS016G PACSystems RX3i 16-slot universal backplane. G is a hardware revision of the CHS016.

IC695CMM002

PACSystems RX3i Serial Communications Module

The IC695CMM002 is a serial communications module for the PACSystems RX3i with two independent RS-232 or RS-485/422 ports. Up to six modules per CPU backplane.

IC695CMU310

PACSystems RX3i Max-ON Hot-Standby Redundancy CPU

The IC695CMU310 is a Max-ON Hot-Standby Redundancy CPU module for the PACSystems RX3i, providing hot-standby CPU redundancy across two RX3i systems with automatic failover. Embedded RS-232/RS-485; Modbus RTU Slave, SNP, Serial I/O.

IC695CMX128

Memory ModuleGE Fanuc

Control Memory Xchange Module

The IC695CMX128 provides deterministic data exchange across a fiber optic network for the PACSystems RX3i, supporting up to 256 daisy-chained nodes. 128 MB SDRAM, 2.1 Gbps link speed, fiber optic LC connectors.

IC695CPE302

PACSystems RX3i CPE302 Controller

The IC695CPE302 is a PACSystems RX3i CPU/controller with 2 MB user memory, 16k discrete / 32k analog I/O, integrated Energy Pack, dual-port 10/100/1000 Ethernet, and PROFINET/Modbus TCP/OPC UA support.

IC695CPE305

PACSystems RX3i CPE305 Central Processing Unit

The IC695CPE305 is a PACSystems RX3i CPU on universal backplane (PCI bus), 5 MB user logic memory, 32k discrete / 32k analog I/O, battery-backed RTC and Energy Pack support.

IC695CPE305-ABAH

PACSystems RX3i CPE305 CPU

GE Fanuc IC695CPE305-ABAH PACSystems RX3i CPU. ABAH is a hardware/firmware revision of the CPE305.

IC695CPE305-AFAT

PACSystems RX3i CPE305 Controller

GE Fanuc IC695CPE305-AFAT PACSystems RX3i CPU controller. AFAT is a hardware/firmware revision of the CPE305.

IC695CPE310

PACSystems RX3i CPE310 Controller

The IC695CPE310 is a PACSystems RX3i CPU/controller with 13 MB user memory, 32k discrete / 32k analog I/O, Energy Pack, triple dual-port 10/100/1000 Ethernet and PROFINET/Modbus TCP/OPC UA support.

IC695CPE310-ABAH

PACSystems RX3i CPE310 CPU

GE Fanuc IC695CPE310-ABAH PACSystems RX3i CPU. ABAH is a hardware/firmware revision of the CPE310.

IC695CPE310-ACAT

PACSystems RX3i CPE310 Controller Module

GE Fanuc IC695CPE310-ACAT PACSystems RX3i CPU/controller module. ACAT is a hardware/firmware revision of the CPE310.

IC695CPE330

PACSystems RX3i CPE330 Controller

The IC695CPE330 is a PACSystems RX3i CPU/controller with 64 MB user memory, 32k discrete / 32k analog I/O, MRP and PROFINET System Redundancy, and triple 10/100/1000 Ethernet (2 switched).

IC695CPE330-ABAF

PACSystems RX3i CPE330 CPU Processor

GE Fanuc IC695CPE330-ABAF PACSystems RX3i CPU processor. ABAF is a hardware/firmware revision of the CPE330.

IC695CPE400

PACSystems RX3i CPE400 Controller

The GE IC695CPE400 is a PACSystems RX3i rack-mounted controller for industrial automation and IIoT. 1.2 GHz AMD G-Series quad-core, VxWorks, 256 MB RAM, 512 MB Flash, 18-30 VDC input, OLED status display, marine certified.

IC695CPI310

PACSystems RX3i Central Processing Unit

GE Fanuc IC695CPI310 PACSystems RX3i central processing unit.

IC695CPK330

PACSystems RX3i CPK330 CPU Module

The IC695CPK330 is a PACSystems RX3i CPU module with 64 MB user memory, 32k discrete / 32k analog I/O, MRP and PROFINET System Redundancy, triple 10/100/1000 Ethernet, USB-A 2.0 and CFast memory card.

IC695CPU310

PACSystems RX3i Central Processing Unit

The IC695CPU310 is a PACSystems RX3i CPU on universal backplane (PCI bus). Up to 10 MB battery-backed RAM plus 10 MB non-volatile flash, operating 0-60 C.

IC695CPU310-EM

PACSystems RX3i CPU Module

GE Fanuc IC695CPU310-EM PACSystems RX3i CPU. EM is a hardware/firmware revision of the CPU310.

IC695CPU315

PACSystems RX3i CPU Module

The IC695CPU315 is a PACSystems RX3i CPU with two built-in serial ports on universal backplane (PCI bus). 20 MB user logic memory, 32k discrete / 32k analog I/O, battery-backed RTC.

IC695CPU315AA

PACSystems RX3i CPU Module

GE Fanuc IC695CPU315AA PACSystems RX3i CPU. AA is a hardware revision of the CPU315.

IC695CPU320

PACSystems RX3i CPU Module

The IC695CPU320 is a PACSystems RX3i CPU module with Celeron M 1.0 GHz, 64 MB RAM, 64 MB NVRAM, two serial ports (RS232/RS485), max 512 program blocks. Operating 0-60 C.

IC695CRU320

PACSystems RX3i Redundancy CPU

The IC695CRU320 is a PACSystems RX3i redundancy CPU supporting up to 64 MB battery-backed RAM. Dimensions 7.0 x 13.3 x 13.3 cm, approx 0.7 kg.

IC695CRU320CD

PACSystems RX3i Redundancy CPU

GE Fanuc IC695CRU320CD PACSystems RX3i redundancy CPU. CD is a hardware revision of the CRU320.

IC695CUP320

PACSystems RX3i CPU Processor

GE Fanuc IC695CUP320 PACSystems RX3i CPU/processor module.

IC695ECM850

PACSystems RX3i IEC 61850 Ethernet Communication Module

The GE IC695ECM850 is an IEC 61850 Ethernet communication module for the PACSystems RX3i supporting IEC 61850, PROFINET v2.3 Class A and Modbus TCP/IP. 2x RJ-45 (10/100 Mbps) plus 2 SFP fiber cages, hot-swappable.

IC695EMT001

PACSystems RX3i Ethernet Interface Module

GE Fanuc IC695EMT001 PACSystems RX3i Ethernet interface module.

IC695ETM001

PACSystems RX3i Ethernet Module

The IC695ETM001 is a PACSystems RX3i Ethernet interface module providing 10/100 Mbps connectivity via two auto-sensing RJ45 ports. Supports SRTP, Modbus TCP and Ethernet Global Data (EGD); compatible with Series 90 and VersaMax controllers.

IC695ETM001-CC

PACSystems RX3i Ethernet Interface Module

GE Fanuc IC695ETM001-CC PACSystems RX3i Ethernet interface module. CC is a hardware revision of the ETM001.

IC695ETM001-CD

PACSystems RX3i Ethernet Interface Module

GE Fanuc IC695ETM001-CD PACSystems RX3i Ethernet interface module. CD is a hardware revision of the ETM001.

IC695ETM001-EM

PACSystems RX3i Ethernet Interface Module

GE Fanuc IC695ETM001-EM PACSystems RX3i Ethernet interface module. EM is a hardware revision of the ETM001.

IC695ETM001-LAAA

PACSystems RX3i Ethernet Module

The GE IC695ETM001-LAAA is an Ethernet interface module connecting a PACSystems RX3i controller to an Ethernet network. 200 MHz processor, two 10BaseT/100BaseTX RJ-45 ports, RS-232 Station Manager port, SRTP and EGD support.

IC695ETM001DF

PACSystems RX3i Ethernet Interface Module

GE Fanuc IC695ETM001DF PACSystems RX3i Ethernet interface module. DF is a hardware revision of the ETM001.

IC695ETM001DG

PACSystems RX3i Ethernet Interface Module

GE Fanuc IC695ETM001DG PACSystems RX3i Ethernet interface module. DG is a hardware revision of the ETM001.

IC695ETM001EH

PACSystems RX3i Ethernet Interface Module

GE Fanuc IC695ETM001EH PACSystems RX3i Ethernet interface module. EH is a hardware revision of the ETM001.

IC695ETM001EJ

PACSystems RX3i Ethernet Interface Module

GE Fanuc IC695ETM001EJ PACSystems RX3i Ethernet interface module. EJ is a hardware revision of the ETM001.